Noob on UNDER question forms packet

I found a component of low caliber I want to use but cannot make it work. It's a bunch of actionscript that I imported with a CFC file and the IDE recognizes the title when I try and work with her. the error I get is "could not resolve < local: LightGauge > to an implementation of the component.

I got the site code http://www.betterthanflex.com/?p=9

Thanks for the tips!

I just deleted the files in the src folder and typed the code in the previous message

Tags: Flex

Similar Questions

  • Question form

    Hello

    I'm using numbers on a Mac and have a question form.

    Basically, I trade the Forex market. A particular strategy, due to the volatility on the graph 4 hr and the range of prices around my entry level, I have 3 entry levels and 3 separate stops.

    In the column A is the pair, for example, it could be GBP/JPY or USD/JPY. Each pair has its own characteristics, volatility and spread, so the size of the stop and the position of the trades are different to each other.

    Before entering the trade I have enter the price of the trade in the B column, and then enter the size of the judgment in column H and after I pressed enter, all of the columns between the two levels of trade of 2nd/3rd and the position of 3 stop price are calculated. These price levels, that I use to Cross Ref orders waiting or create limit orders.

    The formula is the same throughout the rank, I know how to set that upward, that I don't know or even know if it's possible, set the numbers so that it identifies the currency pair are get calculated and so use the appropriate values already predetermined that is unique for each pair? Otherwise if I can't do it, I'll just have some separate tables for each currency pair.

    I hope that this is explained well, his bit of a hardening. Thanks for the help in advance.

    Graeme

    Hi Graeme,

    Are the values of each pair, or are they specific to each of the currencies and calculated from the values to apply to the pair?

    If they are predetermined for each pair, has a lookup table containing a possible list of currency pairs in the column, then each of the values predetermined in the following columns can be used here.

    The values could then be extracted using VLOOKUP, or a combination of MATCH and INDEX.

    If they are predetermined for each currency, replace "currency" for possible "par" and "currency" for 'currency pairs' in paragraph 2 above.

    A table of model listing currencies and the sample values would help in the composition of a formula to adapt to the situation. You can get general information about the functions listed above in the browser functions. Select a cell any on a table, type = to open the browser functions, then enter the function name in the search box to bring up a description (with examples) for each function.

    Kind regards

    Barry

  • Does not start under Oracle forms to 11.5.10.2

    Hello
    .
    I can't launch Oracle ebs 11.5.10.2 forms

    I have connection in this 11.5.10.2 as a customer with an Internet Browser IE 9 and mleteWindows 7 Professional with Service Pack 1. Next step the server recommended the installation of
    Intall and Java™ 6 Update 17 the Java process starts and installation is complete.

    I restart my laptop and re-login to 11.5.10.2-purpose stll ebs does not start under Oracle Forms.

    Does anyone have ideas, what is happening?

    Thank you
    -Manny

    Make sure that you can launch the java console in Control Panel of-> Java. It is the fundamental step to work before going any further.

    and also once the java console is open, check the following:

    'Show the java console' - enabled

    "Activate Next genration java plugin" - disabled.

  • 8100 not showing do not ImageItem under one form (MIDP)

    I have an application MIDP I'm trying to make it work with various Blackberry devices... in this moment, a 8100 & 9000.

    The 8100 is v4.2.1.66 (Platform 2.3.0.57).  I'm using Eclipse and JDE 4.5.0.

    Functionally, it runs very well on a 8100 and a 9000.  But on the 8100, the splashscreen at startup is displayed.  Technically, the splashscreen is a javax.microedition.lcdui.Form, and the code is essentially:

    form.append( new ImageItem( null,
        Image.createImage("/image.png"),
        ImageItem.LAYOUT_CENTER|ImageItem.LAYOUT_VCENTER|
            ImageItem.LAYOUT_VEXPAND|ImageItem.LAYOUT_EXPAND,
        "alt text" ) );
    

    I confirm there is no exception in this code.  But nothing appears on the screen (except the text of the title of the form).

    The same code works fine on the 9000.

    In addition, the same code works fine on the simulator of 8100 included as part of the JDE 4.5.0.

    Any suggestions why it wouldn't work on a real device?

    TIA,

    Richard

    To answer my own question... After more looking through the forum, I noticed the comments that you can use most recent d with older handsets of the firmware.  I was using JDE 4.5.0 with a v4.2.1 8100.

    After downloading JDE4.2.1 and regenerate the file COD, the splashscreen is now works great on the 8100, as well as the 9000.

    RIM, why phones can not check the version of the JDE when loading the application?  In this way, that this problem could be avoided!

    Richard

  • BlackBerry Smartphones BlackBerry noob a few questions.

    Hello. I am quite new to the Blackberry platform. I was a Windows Mobile user for a long time and now I made the switch. Once an expert with WM devices, but now a complete noob with Blackberry. So please don't be too hard on my noobness . in any case to my questions...

    (1.) I wanted to sign in BB online so I can manage my e-mail accounts in the computer oppose on my camera and it wouldn't let me create a sign in ID or connect. Whenever I have enter my PIN/imei number it tells an account has already been done, but I don't have an account. The only thing I did with my blackberry so far is implemented my gmail on my blackberry account and my gmail info does not appear to be sufficient for connection to blackberry online.

    2.) I have set up my gmail to keep the messages on my machine during 15 days. After the 15 days are up these messages are removed from my email all together? or did he just disappears from my camera, but stay in my email account?

    (3.) from WM platform, I got used to having my calendar on my home screen. I guess I have to download a new theme for my blackberry, but I don't want to bog down the new theme to the effectiveness of my BlackBerry smart phone. That will be the case if I download a new theme or am I just being haunted by fears of slowdown I've experienced with the platform WM glitch? suggestions as to what theme?

    Hello and welcome to the Forums of Support BlackBerry.com.

    k20z3kid wrote:

    (1.) I wanted to sign in BB online so I can manage my e-mail accounts in the computer oppose on my camera and it wouldn't let me create a sign in ID or connect. Whenever I have enter my PIN/imei number it tells an account has already been done, but I don't have an account. The only thing I did with my blackberry so far is implemented my gmail on my blackberry account and my gmail info does not appear to be sufficient for connection to blackberry online.

    You must connect on your BB device and create a user/pw name it for the opening of the office.

    Read here: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14378&sliceId=SAL_Pub...

    2.) I have set up my gmail to keep the messages on my machine during 15 days. After the 15 days are up these messages are removed from my email all together? or did he just disappears from my camera, but stay in my email account?

    Just removed from your device.

    (3.) from WM platform, I got used to having my calendar on my home screen. I guess I have to download a new theme for my blackberry, but I don't want to bog down the new theme to the effectiveness of my BlackBerry smart phone. That will be the case if I download a new theme or am I just being haunted by fears of slowdown I've experienced with the platform WM glitch? suggestions as to what theme?

    It should not. There are a few bloated themes out there (mainly those with animated backgrounds).

    For example, here's one that I use now that I like much, with the upcoming calendar events and the last messages displayed on the home screen:

    http://www.BlackBerryForums.com/Media-Center/152197-today-theme-bold.html

    «"4. the ota today no App film non - packaging zen icons, the background changes requested with background House."»

  • Satellite question: form

    Hello Experts,

    I am facing a problem with the satellite tag: form. I use this tag in my template and on submit, it calls for a site entry that performs an operation (it sends e-mail.).

    The model I used the tag Satellite: form is cached.

    Question:

    For some, this form publishes is a success and after a few strokes, suddenly it displays error "401 Unauthorized".  Session is not valid. Please re-login. Bad request.

    After clearing the cache, again it works correctly.

    Please suggest some ideas to fix. Thank you.

    The hidden _authkey_ parameter should be added automatically in the , but you are right that the page should not be cached. If it gets cached with a single value for _authkey_ applications for the other sessions will all fail.

  • Question: Form processing markets - add program

    Hello

    Someone is already using the step 'Add program' with the option 'Use a drop-down list to select the program.'?

    Screen Shot 2015-02-05 at 2.46.39 pm.png

    I tried to use the drop-down list (below the lookup table), but no idea on how to put the real ID (given the program a program ID and the ID of the step).

    Screen Shot 2015-02-05 at 2.46.25 pm.png

    Any help would be appreciated.

    Thank you!

    ADI

    I'm probably going to answer my own question...

    Each step in the program generator has its own unique identifier regardless of the program, so we can use that to put contacts in a particular program to a form handler using lookup option.

    We can get the ID via the API or the source page.

  • Time and expiration time timesheet question (form)

    Yes I know this question has been asked several times but I looked through dozens of examples and many shapes "Sample" in the forums are no longer available since Adobe has changed things around. I have attached the form. I need put in place where time is not given in negative numbers for example, if a person works from 21:00 to 07:00. It needs display 10 hours instead of-14 hours (as it currently is for me). I appreciate the help! There is not 'breaks' or 'dinner' etc in this. Just a calculation between time and time.

    Thank you!

    Screenshot.jpg

    Dropbox - Sheet.pdf of personnel allocation

    In TimeDiff, after this line:

    fend var = Time2Num (sTimeFormat, sEnd);

    Add this:

    If (fend

  • NOOB on P2V question

    Thanks in advance for any input-

    NOOB here after having downloaded and saved a VMware vSphere on a single server hypervisor (quad core Xeon 22 Gb ram 4 NIC and disk of 1 TB Raid 5). First attempt, use the converter stand alone on my PC. Worked perfectly. Then Server #1 Windows 2003 SP2 on IDE drive. A ran "Convert the Machine" even under XP. BSOD on startup. No safe mode. Attempted to change Boot.ini od but file was accurate. Reran conversion more than 2 times the same result. Then, the server #2. Once again Win 2003 SP2. Ran "convert to Machine. Web information found and ran "Configure machine" after sysprep installation correct files including install VMware tools. Exact same results except that now I get a VM splash screen before auto BSOD then reboot. Able to access safe mode. BSOD before anything else. What the hell I'm missing?

    In the converter (step 3) wizard select 'trick' and the "disk controller" the value of "Preserve the Source" "LSI Logic.

    André

  • WebUtility question, forms take so long to load.

    Hi Experts,

    I am facing problem in loading of a form that is configured with webutil_106
    My environment is as below
    Version
    =================
    Version 10.1.2.0.2 forms
    Operating system
    =================
    Client: = Microsoft Windows Xp
    Server-side: = Microsoft Windows Server 2003
    Java Runtime
    =================
    Oracle JInitiator: Version 1.3.1.22
    &
    JRE (build 1.6.0_24 - b07) (same behavior on the two runtimes)
    Database
    =================
    Database is placed in the same network (LAN)

    I already posted the question on the forum

    Re: Forms takes so long opening.
    and
    Re: Java Runtime Security warnings

    Please suggest me a solution, I will be very thank you to you all

    Concerning
    Zafar Iqbal

    Published by: Zafar Iqbal on April 13, 2012 15:00

    Have you checked the metalink notes: [ID 402180.1] & [785340.1 ID]?

    Published by: 929791 on April 26, 2012 02:12

  • Possibility question form and security preferences

    Hey Adobe help-

    I have a client that I made a PDF of a questionnaire they provide to their clients to fill out using forms, I created using Acrobat.

    On my machine, and a very old machine running XP, I could open the doc, fill out forms, save the document under a different title and e-mail with their information intact.

    Now, I sent this file to my client and they advised me that they could not save the file again during the test on how complete the form work, indicating an error message reading, "data typed into this form will not be saved." Adobe Reader can only save a copy of this form. Please print your form if you would like a copy for your records,"which will not work for my client, which means that it will not work for me either. The document must be completed and re-recorded under a new title and sent to my client.

    In addition to searching inside, a contact sent me a screenshot of the PROPERTIES > SECURITY tab which States

    -Document Assembly

    -Content copy for accessibility

    -Comment

    -Singing

    -Creation of Pages of models

    are not allowed. So, I double checked with the basic document I sent to them, and all these security options are ALLOWED.

    There must be something that I am missing to make this file accessible to all.

    Is this a problem with vs Acrobat Reader? What do I need change or direct my client about to obtain this form of work and be savable with the completed forms.

    And again - it is aggrivating on my end because I'm not running in one of these issues on my multiple machines, and yet all my contacts and my customer are facing this problem, so I feel a little in the dark on everything that happens. If you have any info on this, please let me know as soon as you can.

    If you can fill out them and save, you are probably using Acrobat. They are probably using reader.

    You must activate the document so that Reader users can fill them out and save.

    Open the PDF in Acrobat and choose file > save as > Reader extended PDF...

  • Question form and expiration extended drive

    Hello

    I have a question about drive extended forms and expiration.

    The following scenario will exist?

    Reader expansion license expiration Date: April 1, 2012

    The drive model extended: December 31, 2011 with the above license

    The user opens the form on June 1, 2012. Is the form player always extended at this stage?


    Notice that we don't not player - extend (as an activity in our process) every time the form is rendered. Instead, we drive - extend the model and place it as an asset in our ABI.

    Thank you

    Bernard

    It is a response from both sides, first to answer your question, and then to raise an issue of General License.

    To answer your direct question, the rights of extension drive will end when credentials expire (in your example, April 1, 2012). After this time, the user will receive a message that depends on the version of the player.

    • If it is the Reader 8 or before, they will receive a message whose form has changed and that rights are no longer available.
    • For reader 9 and above all, messages have been improved, so that it will tell you that your form has passed the expiration date and that the user needs to obtain a new form of the creator. It will then differentiate between production licences and assessment to tell you which side of things the original RE license fell on.  And then, he'll be saying that you can always view and print the file (it is still a complete in PDF format), but you will not be able to record or perform other duties compatible rightes.

    But the biggest problem is that you seem to not have license appropriate in place.  Production licences have long-term (good until 2021 or 2023) licenses. The fact that your license expires in 2012 says that you were using the evaluation or development of licenses and qualifications, which all tend to have time-outs from three months to two years. You can see the details of your license on the server of the user interface (a 'get info' do) or via Acrobat (Niall explained the technique in another thread - see October 24). And if you are one of them, get the ID number (the identification information will be identifies as P23 or another P with two figures) and I can decode for you.

    The question is independent of the question of if you drive - expand once or you drive to extend a process for each form.

  • Question - forms

    I want to use Adobe 9 Pro to create the form and save them so that others can fill in the form. That's fine, but when they open the document to fill out the form using the adobe Viewer, they are unable to save or send the completed electronic form. I don't want to buy hundreds of copies of adobe pro 9. How this is done? I saw a sort of rewrite of adobe software, but can't find it on the site. Any ideas what to do? Thank you, Roger

    You can enable the form for users of Reader could save them. The option is located under the menu "Advanced" in Acrobat.

  • S7 questions form

    Hello

    I noticed 2 numbers for a few months with my computer laptop i7 s7-391. First of all, is what seems to be screen ghosts/burn-in images where if for example I leave internet Explorer open in desktop mode for a period of time the ghosts of the screen image appears on the desktop and then eventually disappears after a few minutes.

    The second question I put it so after a few minutes of inactivity, my screen goes black. When I take this brightness/contrast is very high and all on the washed out white screen, the display also returns to normal after about 10 seconds.

    These things are not normal right? Should I send warranty?

    Thank you very much

    All normal.

    First of all, the type of Panel of the screen they use has short-term preservation. So yes, if you see a white light window on a gray background for 10 minutes, then move the window, you will see an overview of the initial position of the window for a few minutes and she fades. It does no harm and is not defective. It involves the way they drive the Panel use overdrive for more contrast, but the side effect is the persistence of the temporary image.

    The second issue is the setting of the auto contrast. It is a related aspect of BIOS by which the screen is automatically changed to optimize the contrast. Once more, it's a way to get the most out of the limited screen contrast. He does about 10 seconds, and you can see do it step by step if you look closely. I believe that this has been optimized in later versions of the BIOS, so make sure you have the latest BIOS installed. The steps were a little more fluid and a little less obvious change, if I remember. Once again, though, quite normal and not in default. Only a part of the design.

    With regard to the second poster that referred to a ghost 1 cm all around the edge of the screen. I saw this sometimes, but it fades after a while. It is also related to the retention of the screen. Have you tried a completely white screen and leave for 30 minutes like that? He can put everything back to normal. The temperature affects the retention. If the laptop is cold, retention is worse.

  • DMVPN questions - IPsec packets

    Hi all

    Currently, I am configuring DMVPN for the first time. I followed the guide to configuring cisco and Googling a bit other strands however seems to have hit a brick wall.

    The Setup is in a lab environment, so I can post as much information as required, but here's the important bits:

    I have 3 routers Cisco 2821 running IOS 12.4 (15) with a layer 3 switch in the Middle connecting ports 'wan' together. the routing works fine, I can ping to each of the other router router.

    Excerpts from the hub router config:

    crypto ipsec transform-set DMVPN_SET esp-3des esp-md5-hmac

    !

    crypto ipsec profile DMVPN_PRJ

    set transform-set DMVPN_SET

    !

    interface Tunnel0

    bandwidth 10000

    ip address 172.17.100.1 255.255.255.0

    no ip redirects

    ip mtu 1500

    ip nhrp authentication secretid

    ip nhrp map multicast dynamic

    ip nhrp network-id 101

    ip nhrp holdtime 450

    ip tcp adjust-mss 1460

    tunnel source GigabitEthernet0/0

    tunnel mode gre multipoint

    tunnel key 10101

    tunnel protection ipsec profile DMVPN_PRJ

    !

    interface GigabitEthernet0/0

    description HQ WAN

    ip address 1.1.1.1 255.255.255.248

    ip nat outside

    ip virtual-reassembly

    duplex auto

    speed auto

    !

    and here's the config on the first router spoke:

    crypto ipsec transform-set DMVPN_SET esp-3des esp-md5-hmac

    !

    crypto ipsec profile DMVPN_PRJ

    set transform-set DMVPN_SET

    !

    interface Tunnel0

    bandwidth 3000

    ip address 172.17.100.10 255.255.255.0

    no ip redirects

    ip mtu 1500

    ip nhrp authentication secretid

    ip nhrp map 172.17.100.1 1.1.1.1

    ip nhrp map multicast 1.1.1.1

    ip nhrp network-id 101

    ip nhrp holdtime 450

    ip nhrp nhs 172.17.100.1

    ip tcp adjust-mss 1460

    tunnel source GigabitEthernet0/0

    tunnel mode gre multipoint

    tunnel key 10101

    tunnel protection ipsec profile DMVPN_PRJ

    !

    interface GigabitEthernet0/0

    description Site 1 WAN

    ip address 11.11.11.1 255.255.255.248

    ip nat outside

    ip virtual-reassembly

    duplex auto

    speed auto

    !

    If I closed/no farm tunnel0 on RADIUS 1 interface, I get the following error on the hub router:

    Mar 30 13:41:17.075: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet.

    (ip) vrf/dest_addr= /1.1.1.1, src_addr= 11.11.11.1, prot= 47

    so I feel im lack some config on the side talking to encrypt the traffic, but I'm not sure what.

    Here's the output router spoke:

    RTR_SITE1#sh dmvpn detail

    Legend: Attrb --> S - Static, D - Dynamic, I - Incompletea

    N - NATed, L - Local, X - No Socket

    # Ent --> Number of NHRP entries with same NBMA peer

    -------------- Interface Tunnel0 info: --------------

    Intf. is up, Line Protocol is up, Addr. is 172.17.100.10

    Source addr: 11.11.11.1, Dest addr: MGRE

    Protocol/Transport: "multi-GRE/IP", Protect "DMVPN_PRJ",

    Tunnel VRF "", ip vrf forwarding ""

    NHRP Details: NHS:       172.17.100.1  E

    Type:Spoke, NBMA Peers:1

    # Ent  Peer NBMA Addr Peer Tunnel Add State  UpDn Tm Attrb    Target Network

    ----- --------------- --------------- ----- -------- ----- -----------------

    1         1.1.1.1    172.17.100.1   IKE    never S       172.17.100.1/32

    Interface: Tunnel0

    Session: [0x48E31B98]

    Crypto Session Status: DOWN

    fvrf: (none),   IPSEC FLOW: permit 47 host 11.11.11.1 host 1.1.1.1

    Active SAs: 0, origin: crypto map

    Outbound SPI : 0x       0, transform :

    Socket State: Closed

    Pending DMVPN Sessions:

    RTR_SITE1#sh ip nhrp detail

    172.17.100.1/32 via 172.17.100.1, Tunnel0 created 00:33:44, never expire

    Type: static, Flags: used

    NBMA address: 1.1.1.1

    RTR_SITE1#sh crypto ipsec sa

    interface: Tunnel0

    Crypto map tag: Tunnel0-head-0, local addr 11.11.11.1

    protected vrf: (none)

    local  ident (addr/mask/prot/port): (11.11.11.1/255.255.255.255/47/0)

    remote ident (addr/mask/prot/port): (1.1.1.1/255.255.255.255/47/0)

    current_peer 1.1.1.1 port 500

    PERMIT, flags={origin_is_acl,}

    #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0

    #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0

    #pkts compressed: 0, #pkts decompressed: 0

    #pkts not compressed: 0, #pkts compr. failed: 0

    #pkts not decompressed: 0, #pkts decompress failed: 0

    #send errors 46, #recv errors 0

    local crypto endpt.: 11.11.11.1, remote crypto endpt.: 1.1.1.1

    path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0

    current outbound spi: 0x0(0)

    inbound esp sas:

    inbound ah sas:

    inbound pcp sas:

    outbound esp sas:

    outbound ah sas:

    outbound pcp sas:

    All these commands appear as empty when I throw them on the hub router.

    Any help appreciated.

    Thank you

    No negotiate is because you do not have an Ike key implemented. You need

    Crypto ISAKMP policy 1

    BA (whatever)

    AUTH pre-shared

    Group (whatever)

    ISAKMP crypto key 0 some secret address 0.0.0.0 0.0.0.0

    Hun and talks must match.

    Your IPSec transform-set should also have "transport mode".

    Sent by Cisco Support technique iPad App

Maybe you are looking for

  • must click twice to the yahoo mail signin

    For some reason any I have to double click on the "Sign IN" button The first time that nothing happens, does not even try. The second time it still works. Try in IE and it works the first time. In FF, I select the username of a pull down and FF fills

  • update windows unwanted in ares of notification

    Hi, I got some windows updates, I installed all the details (update for Windows Vista (KB971029)) below Download size: 7.2 MB You may have to restart your computer for this update is taken into account. Update type: recommended Install this update in

  • Cannot download or unstall Windows updates since Aug. 12

    The last date on which Windows updates have been installed correctly on my PC has been on 12 August.  Since that date something prevents me to install new updates.  Whenever I click on the "Install updates" button on the box "Download and install new

  • No devices found

    I uninstalled to accidentilly realtek hd audio and now my sound does not work. ive tried looking up how to get it back but all I continue to download is driver scans that do not help even as driver boost. can someone give me step by step how to retri

  • vCenter still not compatible with Windows Server 2012?

    HelloCan I read o NTHE KB:VMware KB: Minimum system requirements for installing vCenter ServerWindows 2012 is not listed.is this normal?Thank youVincent