NOR CAN missing in MAX 9862

Similar Questions

• Is it possible to simulate a XNET CAN device in MAX?

  I ordered one material OR 2 ports 9860-selectable OR XNET C Series Module and 2-wire transceiver capable of CAN - FD.  Of course, my time line for implementation is tight.  I would like to write the driver I need before that happens the hw.  For the many materials OR I can go to MAX and simulate the device.  It seems that this option is not available for communication devices series like the one I ordered.

  Is it possible to simulate my device in order to create a session and debug my driver?

  Thank you

  Mick

  Hi sherlieferdilus,

  There is no way to simulate actual XNET like DAQ hardware modules. For our simulated DAQ hardware, we are able to return dummy data (for example, a simple sinusoid to the analog inputs), but XNET will have something completely different on all buses and behave differently on this basis. More, to use a XNET database for tests must be frames or signals corresponding to the information contained in the database from your CAN Bus.

  That being said, OR XNET is fairly simple to use with a large number of examples in our search example LabVIEW for you to investigate and begin to work from. Also, you should be able to start working on your OR-XNET database, if you have not already and that you plan to use a (this is required by all Sessions of XNET except framework flow Sessions). If you are not already familiar with XNET, I would take this time to study some of the examples and take the time to view our material OR XNET and the manual of the software. In particular, learn about the different types of Session and the types of synchronization you can use so that you are already familiar with them once you receive your material.

  NOR-XNET Hardware and software manual: http://www.ni.com/pdf/manuals/372840l.pdf
  Introduction to NOR-XNET: http://www.ni.com/product-documentation/12375/en/

• I can see the drive, but can't open the DVD RW drive, nor can I copy them to it.

  by clicking on the drive does nothing. It does not open. I can't send pictures on the disc to be copied, nor can I copy photos on the disk. I stopped and restarted. I have antivirus protection that says that it is up-to-date.

  I went to the control panel and clicked on the device and it says it's working properly, but this clearly isn't.

  Hello

  If they do not help so be sure to check with the system manufacturer and/or manufacturer Drive, their documentation online Support and drivers and ask in their forums (if any) on the known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ====================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ===================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a Restore Point before changing anything)-find the DevManView device and then right click it open in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  .

• How can I put someone other iCloud for my computer account? I'm on my mothers iPhone account and I don't have physical access to its features, nor can I explain to heehaw to do itself.

  How can I put someone elses iCloud account from my computer? I'm on my mothers iPhone account and I do not have physical access to its features nor can I explain how do it herself.

  No, but you can use a remote control program and do it yourself. Try Teamviewer, or similar.

• The watch is not, nor can it sync with reminders.

  I bought at the Apple Watch last week.  I'm back this week.  Why?  The watch is not, nor can it sync with reminders.  For me, this is the reason more and more useful to have the watch.  Without the reminders and the ability to easily sync with other devices, it is not a value of the purchase.  I am disappointed by the lack of foresight of Apple and didn't want to patch the problem with a third-party application.  It will be difficult to come back to me.

  < re-titled by host >

  Hello

  Apple recently announced reminders will be added to Apple Watch as an application integrated in the software to come, watch OS update 3, which is scheduled for release this autumn / fall.

• My emails are deleted after a few days. If I read them everyday I can miss important messages.

  My emails are deleted after a few days. If I do not consider my inbox every day I can miss important messages.

  E-mail address is removed from the privacy *.

  Hi Marion,.

  The most likely cause is that you have a setting that is configured to do this in your e-mail program or in your online account.  I recommend that to start with your email provider to see if they can help you with this problem (as it's probably something in these settings, or they may be able to find the settings in the program that you are using if it's one they know).  If they can help or saying is not your online account settings, then we need to know the version of Windows you use, e-mail program, (name and version) you are using, or the browser you use to access the account.  With this, we can help you with the problem or refer you to experts that specialize in what you use.

  Thanks and good luck!

• nor can 2.7.4 not appearing is not under max remote system OR

  Hello

  I try to install the NI CAN 2.7.4 software for a cRIO thanks MAX.  I checked that I installed module and rio can.  I CAN 2.7.4 installed on the computer, but when I go to MAX to install on the target, it will not be displayed.  Does anyone have experience with this?  Can I even use the NI CAN 2.7.4 with the cRIO?  I keep reading conflicting information.  I have a NI 9853 attached to it, if that makes a difference.

  Thank you.

  You cannot use NICAN with a 9853

• Compact RIO NOR-9082 Configuration in MAX, cannot save

  Hello world

  I tried to implement a new cRIO the NOR-9082. Currently, I am able to see the cRIO under "Remote devices" in MAX configuration and view. However, the two errors that are produced:

  (1) when I try to change the setting as the host name and press 'save' a warning appears saying: "there was a problem, save the settings of the target. Make sure that your material is under tension and hat it is connected to the network. I have attached a picture below.

  (2) at the same time, when I try to install the software on the cRIO by double-clicking on 'software' and selecting "Add/Remove software" and run the Wizard "LabVIEW Real - Time Software", another error is displayed: "error: the disk hard n the remote system is complete or encountered an i/o error." I've also attached a picture below.

  The cRIO is lit with "DISABLE RT' toggled OFF. It is connected to the network via an Ethernet cable. This connection seems fine, however I look. (The connection of Ethernet port light flashes continuously activity indication etc..) It is the PC that is connected to the same network, I'm trying to interface with the cRIO. The cRIO displays the right IP address assigned through the network.

  My apologies if I have not provided enough information to solve this problem, but if someone might be able to explain why I could meet these two problems in these circumstances, assistance would be much appreciated. Thank you!

  It seems the main reason I got all these weird problems, it was because the compact RIO NI 9082 can come bundled with windows 7 and LabVIEW 2012 SP1 preinstalled and run as stand-alone computer so all I had to do was plug in a VGA to a screen and a mouse USB, keyboard and an eithernet for network connection cable and he started very well. Now, development and deployment happen locally on the cRIO. It was a little silly to me, so hope that helps someone!

  Kind regards

  Ago - Wei.

• After setting up voicemail on 5 new successfully it has stopped working.  I now get mssg. "setting up voicemail" when I press its icon.  Nor can I change password through settings.  Any ideas?

  After setting up voicemail on 5 new successfully, he stopped after only 1 day.  I now have the message "set up voicemail" when I press the icon of the virtual machine.  Nor, if I can change the password via the parameters, any ideas?

  dukie1 wrote:

  After setting up voicemail on 5 new successfully, he stopped after only 1 day.  I now have the message "set up voicemail" when I press the icon of the virtual machine.  Nor, if I can change the password via the parameters, any ideas?

  You want to communicate with your carrier. Your means of troubleshooting access to your voicemail only unit is extremely limited because it is a managed function of carrier.

  You can try to reboot your iPhone or resetting network settings through settings > general > reset, but I doubt he will bare much fruit. It is more than likely that's going to be a conversation with the carrier that suits him.

• How and when can I remove Max

  How can I delete my computer max. should I do this or it won't hurt my computer?

  Removal or clearing the cache usually will slow down your computer instead do something for her, accelerated.

  Then please explain why you think that you want to delete the cache.

• USB missing in MAX voice

  Hello world

  I am trying to interface a M833 Monochromator with my pc using labview. My system is actually running

  LabView 2010 sp1

  MAX 5.0

  3.8.1 OR serial

  NI-VISA 5.1

  on Windows XP.

  Open my present instrument Device Manager (this is a plug-and-play device and works well with the softaware factory, so I think the drivers are ok).

  Max in devices and Interfaces are listed only:

  -Network devices

  PXI-

  -Series and parallel

  What can I do to grab votes usb peripherals and interfaces in Max?

  Thank you, uge

  Hi uge026,

  Since your M833 monochromator is not a material OR and DAQ compatible, it can be registered OR max.

  Kind regards

  uge026

• my cd/dvd driver is not woking, nor can I locate?

  can not burn cd or DVD my computer can not find the driver and I have to as you manually open the cd with a needle?

  Hello

  ·         Were there any changes made to your computer until the problem occurred?

  ·         You are able to see your DVD in Windows Explorer (my computer) or the Device Manager?

  ·         This error message you get when you try to burn CD/DVD discs?

  There could be a hardware problem possible with your CD/DVD drive.

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method 1:

  Check if your CD/DVD drive is detected in Device Manager.

  Click on start - Control Panel of configuration-Device Manager - CD/DVD

  Method 2:

  See the following Microsoft article that has solutions to some common problems with CD/DVD drive:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Fixit

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Cannot remove my former sync account nor can I connect to it. ???

  I can't synchronize. so, I created an account to sync with my gmail address. I tried to delete my old account to sync yahoo but firefox says that the account does not exist. When I look at the area of "three bars", it shows an old yahoo sync account.

  Try to delete the signedInUser.json file in the Firefox profile folder and delete the folder of weaving (Sync was formerly known as armor).
  If that is not enough then delete the prefs.js file to reset the prefs and may also remove the compatibility.ini file to reset the profile.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• Since I downloaded El Capitan I think I can't paste it into my external hard drive.  I use to download my card reader, copy it, and then download to a new folder on the external drive.  It will not work now and nor can I create new folders on the hard dr

  I used to download pictures from a card reader, copy them, and then stick it on my external hard drive.  Since El Capitan of download, it does not work - I can download and copy, but can not stick to the external hard drive.  I can't set up the files on the external hard drive either.  However, I can download what is already on the external hard drive without any problem.

  How the external drive is formatted?

• NOR CAN arbitration IDs failure

  What is the breakdown of arbitration extended message ID?

  Is this:

  | x | x | 1. standard 11-bit | 18 - bit extended |

  ^                ^ ^                ^

  Lsb msb lsb MSB

  or

  | x | x | 1. 18 - bit extended | standard 11-bit |

  ^                ^ ^                ^

  Lsb msb lsb MSB

  I could not find this information. I need the map CAN message structure in the implementation of Freescale, which presents itself as follows (32-bit):

  | standard 11-bit | SRR | IDE | 18 - bit extended | RTR |

  ^                ^             ^                ^

  Lsb msb lsb MSB

  where SRR-online bit substitute remote request (request remote for the standard ID)

  IDE => Extended ID bit. 1-scope id, 0-online standard id online

  RTR => Request Remote for the scope ID.

  Please advice.

  The CAN bus does not send 18 0 bytes bytes padded for a standard identifier.

  Most of the material has a 32-bit register for code.

  For a 29-bit ID, you fill in 28:0. Identification of 11 bits, you fill 28.18 with the ID.

  One of the higher bits 29, 30 or 31 indicates if the standard ID or extended by the concern of transmission.