Nor given DAQ Assistant District recognize a USB chassis and modules, but does "Measure."... »

Similar Questions

• Computer recognizes the usb microphone and the head set with the sound prompt but not instructions to continue.

  Original title: usb speaker and seeded

  c.p. recognize the usb microphone and head studded promp sound but no instructions to continue. I am trying to add voices or narration to my editing of soundtrack.

  Hi Billylambert,

  1 Windows operating system you are using?

  2. What is the brand and model of headphones and microphone?

  3. what video editing software do you use?

  4. were you able to use the device before without any problem?

  5. have you made a recent software or hardware changes to the system?

  If you are using Windows 7, you can try to run the Audio recording utility and check if it helps.
  Open the troubleshooting of Audio recording

  For more information, see the article:

  Connect one microphone, music player or other audio device to your computer

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• NOR-traditional DAQ will work with a USB-6008?

  Hi guys,.

  I have ordered a USB-6008 and I would use it with the NOR-DAQ traditional 7.4.4 instead of MX. Is this supported?

  Thank you

  Jim

  LV 8.6

  LV 8.01

  LV 7.1

  TS 4.1

  Jim,

  No, traditional DAQ isn't USB compatible, 6008.

  You can use DAQmx base instead, but I wouldn't recommend it.

  hope this helps,

  Norbert

• Problems with NI-VISA 5.0.3 detect a 9474 cDAQ chassis and modules via USB

  Hello friends.

  I'm running Windows 7 x 64, I installed MAX 4.7.4, NI-VISA 5.0.3 and the other software that comes with them.

  I have a 9174 cDAQ chassis and 3 modules.

  My problem: when I connect the hardware to my PC via the USB port, it presents itself to the MAX, but NI-VISA does not detect sub "USB" (or elsewhere).

  Purpose: What I'm trying to do is communicate with the NI 9223 module, using VISA through MATLAB commands.  The MATLAB data acquisition Toolbox supports not the NI 9223, so I would try to acquire help from VISA.  However, I don't find the VISA of the device address.

  I would like to know your opinion on why modules are not displayed in NI-VISA and if my ultimate quest is valid without doing something nasty like writing C++.  I have not found a good source for VISA OR orders either, but I'm sure it exists.

  Thank you!

  Wes

  Hey eccentricorbit,

  Unfortunately, you can't talk about a module using VISA or cDAQ chassis. Your options are DAQmx and low level of coding (something nasty like C++). If you do not get DAQmx, you can find excellent examples by accessing:

  "" "Start menu" National Instruments "NOR-DAQ ' text Code support ' ANSI C examples

  I hope this helps!

  ~ kgarrett

• my computer doesn't recognize my usb device and mouse

  MY COMPUTER DOESN'T RECOGNIZE THE DEVICE USB AND MOUSE IT NOT THERE NO COMMUNICATION BETWEEN THE COMPUTER AND THE MOUSE ALSO COMPUTER AND PORTABLE USB

  Thank you

  You must indicate what is the brand of mouse and the model? Whjat transponder type does the mouse have? The mouse has ever worked? Your laptop has 4 USB ports. No device works in one of the ports?

  The USB FLASH DRIVE is recognized if plug you it into a USB port on a different computer com?

• I can't seem to Windows wireless on Lenovo laptop to recognize a USB connection and turn on the wireless radio.

  I use a USB connection to my mobile phone for my internet connection. I want to use wireless mobile radio to connect other devices, but the window wireless services does not recognize that I am connected to the internet. What can I do here, gurus?

  Hello

  Please contact Microsoft Community.

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.

  If the problem persists, proceed from the link below to fix this problem

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• USB 3.0 loads but does not transmit data

  Model: Y510p with Windows 7

  Both my USB 3.0 ports in load of the devices, but windows will not recognize them (so I can't do a backup).

  I tried to remove and reinstall the USB drivers but the computer still does not recognize a connected device. Even tried to search the hardware changes.

  Normally I would restore Windows but can not because I have not saved with no USB.

  Any advice would be great,

  Thank you

  try a system restore and see if that helps and if not look for the chipset drivers

• USB ports give power, but does not

  Hello..

  I have this model

  HP Pavilion dv6 - 6155ee Entertainment Notebook

  Today, I found that when you plug the mouse into one of the USB ports on the right side... it does not work, but the mouse gives light.

  I tried on the USB Ports on the left side... It works well...

  What is the problem now?

  Good. You can try to reinstall Windows, but I would only if the usb port works under Linux. Otherwise, you are looking to replace this daughter card as Komdiv has helpfully laid out for you.

• USB drive and cd player does not

  When I insert a usb key, I get the message "You must format the disk in drive F: before you can use it". Also, when I insert a dvd in the drive I see the dvd icon change still appears the message "Please insert a disc into drive F". Can someone help me? I really don't want in the form

  earnz

  Try to run these tools:

  http://support.Microsoft.com/mats/hardware_device_problems/

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Tasks of the DAQ Assistant

  How to create a task in the DAQ Assistant of LabView for one of our modules cDAQ without actually being connected to the cDAQ module?

  You can simulate a large number of instrument supported by DAQmx with Measurement & Automation Explorer.

  Right-click on the NOR-DAQmx devices and then create new, then simulate and choose from the list of supported devices.

  For the cDAQ chassis first then your module.

  Excuse me, but I don't have an English version of MAX and so I did not have the correct translation of command...

  When your simulated device is configured, ca use you it with the DAQ Assistant in LabVIEW.

• Satellite A200-1AE does not recognize the USB 2.0 flash drive

  I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
  The same USB works without problem on other computers with vista!

  Someone knows what to do?

  Hello

  First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
  After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

  Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

  Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

  Best regards

• Control relay with Boolean switch using DAQ assistant 9481 - problems

  Sorry for what may be a stupid question but I'm stuck in quicksand.

  I use a relay module 9481 and have two external relays connected lines 0 and 1.

  When I create a digital output 0 line by line, I can run the test inside the express and activate the relay and turn off without problem.

  The generated block DAQ expressed expects a Boolean input of 1 d. (See attached photo).

  I want to connect a Boolean switch relay line disk 0. You can connect live not because the switch is Boolean and the input is Boolean 1 d - I'm a conversation in the pict.

  All plumbing lines display results, the relay never active.

  Any bunch would be greatly appreciated! Thank you

  

  Mr._Mechanical,

  Welcome to the Forums of switch OR this forum is generally intended for products OR-SWITCH [such as the NI PXI-25xx & NI SCXI-11xx], I think I know the answer to your question.

  I think the reason why it's a failure is the conversion you make generates a table of 16 Boolean [as the 'boolean to (0,1)' function creates a data I16 type] with your data more false data points 15.

  

  When you try to control the relay, he sees 16 datapoints are you Commander to a single port [channel] and so error out.

  

  My suggestion would be to use normal DAQmx digital output screw [with, he set up as ' Digital > single channel > single sample > Boolean (1 line) "] rather than the DAQ assistant.

  If you use the daq assistant, simply by using the function 'Building the table' will transform your simple Boolean data point in a Boolean array containing a single element.

  

  While the DAQ assistant is very easy to use, I recommend that you use the DAQ assistant, because this reduces the features and increases the execution time.

• DAQ Assist reading bad voltage

  Hello

  I use the DAQ Assistant VI to read a voltage analog input of a card of National Instruments PCI-6221. I read the AI0 pin voltage. I provide voltage directly on this pin of a continuous feed, but the measurement of voltage obtained from the DAQ Assistant is incorrect: it seems to be reduced by a factor of about 1/3. For example, if I have 4 volt power to pin AI0, DQA help bed 1.43 Volts. I used a multimeter to confirm that the voltage on the PIN AI0 is actually 4 Volts and I know that the problem is with my LabVIEW program and not my diet.

  Here are the steps that lead to my problem:

  1. in the block diagram, I insert a block DAQ Assistant.

  2. in the Properies of the DAQ Assistant, I select an analog input-> voltage

  3. select channel ai0

  4. I click "test" to test the channel

  5. the tension is indicated as being 1.43 Volts, although 4 Volts is provided to pin (this is confirmed by a multimeter).

  6. to ensureI click OK to complete the configuration of the DAQ Assistant. I run the program and draw blood. The graph also 1.43 Volts.

  Does anyone have an idea why this can be produced. I have spent a good 4 hours trying to diagnose this and haven't found anything.

  Thank you

  Alnaif adnane

  It's normal. Do a search for the topic "ghost".