NOR-RIO 4.0 is not compatible with 64-bit LabVIEW?

Hello

I have a 7841R multifunction RIO card.  I currently install the evaluation version of LabVIEW to test.  I've got 64-bit LabVIEW installed successfully and I had installed NOR-RIO 3.6 (which was on the disc that came with the card).  Trying to install other features (I think C to FPGA interface or something), I discovered that I needed NOR-RIO 4.0.  I uninstalled OR RIO 3.6, downloaded OR RIO 4.0 and now I try to install it.  I get the message a few steps in the process:

Important note about NOR-RIO of LabVIEW support (64-bit Versions)
A 64-bit version of LabVIEW has been detected on your system.  This version of the driver NOR-RIO support the 64-bit versions of LabVIEW.  However, this version of NOR-RIO is fully compatible with the 32-bit versions of LabVIEW installed on 64-bit operating systems.

Is there a NEITHER-RIO 4.0 version that supports the 64-bit versions of LabVIEW?  If so, could you point me to it?

Or do I have to install the 32-bit version of LabVIEW?

Thanks for the help!

See you soon,.

Tom

Hey Tom,

Unfortunately, we do not have a RIO driver that is compatible with our 64-bit LabVIEW Development software.  If you need to use the RIO driver, you must install the 32-bit version of LabVIEW and build your applications in the development system.  Sorry for the confusion at the start during the installation process!

Tags: NI Software

Similar Questions

  • Old 32-bit? Software not compatible with 64-bit PCs.

    Two examples of these applications (which is used to run properly and without problems on my previous win 98 se, 32-bit computer):-1) the Oxford English Dictionary and the 2) encyclopedia Brittanica Millennium Edition to ~ 2004. Properties, compatibility or Panel... Compatibility Assistant of programs-can not solve this problem, I try to any settings apply.

    Hello

    This compatibility mode is not guaranteed to work with all the old programs

    and you have changed the bit versions so that can cause more problems

    always check the compatibility of vista programs on the link below

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Here's what you should have tried to use?

    It is not compatible with vista, you can try running it in a previous operating system mode

    This does not work for all programs

    read the information below

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  • Not compatible with 64-bit operating system CD

    I have some old pc programs cd-rom that will not play on win 7 pro 64-bit.

    Msg says error 32 bit will not play on my 64-bit computer.

    I spent hours looking on the net.

    Help please.

    Try to make older in this version of Windows programs, see what the Windows 7 Compatibility Center says of this application, check with the publishers of the application on their site Web & try a search on internet about this to see if there is any solution suggested workaround [that could allow the application to run but with limits]

  • What can I do when Texas Instruments PCIxx12 Integrated FlashMedia Controller is not compatible with Windows 7?

    I have a gateway C - 140 X for a good 2 years and I find always the best of the class. The current version is Windows Vista Ultimate Edition.  The upgrade path should be got Windows 7 Ultimate, which, incidentally, should some sort of reduction but I understand he must make an economic profit.

    I ran the Windows 7 Upgrade Advisor Beta .

    Report all gave his go-ahead, but one Texas Instruments PCIxx12 Integrated FlashMedia Controller by Texas Instruments Inc. device is not compatible with Windows 7. So I can't upgrade once the device is compatible.

    The obvious answer is to consult the website of the manufacturer of Texas Instruments or gateway OEM.
    The gateway OEM does not help because it has stopped supporting once he sold to MPC, which then went bankrupt while the drivers are available on the gateway site to download only for Windows Vista.
    Looking at the site of Texas Instrument is a maze leading to difficulty finding support on the device in question. I'll try to contact the support from them, but what do I do? I mean the device is able to run Vista and other Texas Instruments products are compatible but just the card reader.

    If you tell me to new contact the third party or the manufacturer's website, then I ask that you give me the link to the support or the driver.

    I tried to control the Windows 7 Compatibility Center , but it is not upward.

    I got it.

    After the upgrade from 32-bit Windows Vista Ultimate 64 bit of Windows 7 Ultimate that required me to do a clean install. I prefer clean install because it is sure that everything works. Yet once I was pounded by an unmanned aircraft. In the hardware Manager, he has been shown as a mass storage controller. I forgot my card reader and more worried about trying to get the driver for the mass storage controller because it seemed important to something. Then I let down, but after a few days, I looked around the same instance in the forums which turns out be my card reader. I went back to the drivers from the website of the gateway for card reader Driver .

    I just installed the Vista driver and now it works. Everything on my computer now works with Windows 7 64 bit by going to manufacturers for devices. Broadcom Bluetooth.
    Wired and wireless from Intel.
    Mass of Intel storage.
    The rest was from Windows Update, check all out them.

    The only thing I feel crazy is that send to Onenote 2007 is not compatible with 64 bit OS and the strength to wait for the next version of Office for it to work.

  • Windows 95 version of Print Shop Deluxe is not compatible with Windows 7. If anyone can solve this?

    . Windows 7 64 bit printing problem

    I used the Windows 95 version of the Print Shop Deluxe on XP for years without problems, but now I just got a new laptop running Windows 7 (64 bit) and the CD will not download. Dialog box shows is not compatible. Anyone has any ideas, the update to download this CD please?

    Its unlikely that the PrintShop version designed for Windows 95 uses some 16-bit code that is not compatible with 64 bit versions of Windows 7.

    Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

    Run in Windows XP Mode requires:
    (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

    Windows XP Mode and Windows Virtual PC
    http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

    Windows XP Mode now accessible to more than PC
    http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

    Get started with Windows Virtual PC
    http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

    http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

    Windows 7 - upgrade Express features:
    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  • I'm told my iPod classic is not compatible with the latest version of iTunes and I need to buy a new iPod

    I have an iPod classic, 160GB, 2009 (I think that I bought in 2011, but they say it's a 2009 version).  I took good care of her, and it worked wonderfully for me.  Recently, with the latest updates of my OS, iTunes, etc. on my MacBook, I got the iPod synchronization problems.  This last time I tried, the iPod has not been recognized by iTunes, or it would be recognized and switch between connected and synchronization, but never go further.  Finally, if I left it long enough that, it would eventually be sync, but then he would go back and forth between sync synchronization, connected and finishing.  After leaving he did that for a while, he would finally come with an error message saying that the iPod could not be synchronized.  Then my iPod was erased at all to this subject (everything is always on my iTunes at least library).  I tried to restore my iPod, which she did, and then synchronize everything again.  He went through the process of synchronization, only to say in the end could not be synchronized.  Sometimes my iPod not even be recognized by iTunes.

    So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software.  Both were up to date, so I think I 2.0.4 on my iPod and 12.3.2.35 on my iTunes.  Apple told me that I can't go back to an earlier version of the iPod software because I have no iPod backups on my iTunes.  Therefore they told me the only solution is to spend $ 400 on a new iPod, which I can't afford to do it, nor have you I feel it's a reasonable solution, since my iPod is perfectly good and I was very careful care of her.

    Is there anything that can be done to make the two compatible?  Can I download an older version of iTunes?  I'll be able to get my most recent iTunes library on the older iTunes?  Should not continue making it compatible, the iPod classic and iTunes since so many people use iPod classic, and they are the only thing like him around?

    I looked in the other forums on the topic, but nothing seems to talk about this compatibility problem and provide a solution.  Someone at - it ideas?  Can you manually manage your music on your iPod, even if the two are not "compatible"?

    Thank you!

    So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software.

    Seriously...?  My 'classic' 3rd gen iPod in 2003 still works fine with the latest version of iTunes and the latest OS X.  Even the original iPod should still work (assuming the iPod itself still works).  Your iPod classic 2009 is certainly consistent.  That support the needs of the person coming back through training...

    When you connect it now, it seems in iTunes?  Are you able to select in iTunes, go to the settings screen, where you see the iPod photo and name in the upper left corner of the window and a box below that?

  • Why most modules are not compatible with thunderbird vs 38.1.0?

    In recent weeks, I use Thunderbird 38.1.0.

    But when I have a few Add-ons, the site informs me that all add-ons are not compatible with my version of Thunderbird 38.1.0.

    I am using windows 7 Pro 64.

    Please can someone help me with this problem?

    Kind regards

    HenkB

    You must request the addition on the author. Thunderbird has no control over software 3rd party development.

  • What does this mean and how to fix: the router address you entered is not compatible with your WAN IP address.

    I connect to an access provider via Airport Extreme, which is extended through two Airport Express.  When I try to edit anything in one of these devices, even a name, I get this message: "you have entered the address of the router is not compatible with your WAN IP address.  My connection seems to work, but there is clearly something wrong with her.  The Express has no DNS and will not update without the same message.  I have no idea what this is all about and will greatly appreciate the ideas.

    This means that WAN Setup does not or does not install across the network.

    The best way to solve this problem is beginning on...

    Reset all three at the factory and reconfigure each in turn. Do the extreme first and make sure it works... Then add the express.

    If you need help with that we will need to know which modem or modem router to your ISP gave you and possibly the type of services to wide band... and who is the provider.

    Give us screenshots of each installer as you do.

  • Norton internet security V 22.5.0.124 is not compatible with Firefox v 39. What should I do?

    Norton Internet Security V 22.5.0.124 just installed on my computer, and the Firefox Add-ons manager says it's not compatible with Firefox V 39. Will you be fix this in Firefox? If so, when.

    If you indeed have the update of Norton toolbar 22.5.0.124 for Firefox 39.0 then make sure that the extension is enabled in the addons Manager.

  • New iPhone is not compatible with Macbook

    I upgraded my iPhone and found that it is not compatible with my MacBook running 10.6.8. I have a lot of music that I have not bought on the iTunes store I can't transfer it to my phone. Is there a software that I can use it, or I have to buy a new computer for $1000 to work on my iPhone?

    If your old MacBook cannot run at 10.8.5, you will need to either buy a new computer, or you can run Windows using Boot Camp or a virtual machine and synchronize your phone with it. You will need to install Windows 7 or higher. VirtualBox is free and should be able to manage currently running Windows 7 and iTunes well enough to allow you to sync your music with iTunes.

    In the meantime, you can start saving for a new computer. You do not specify which MacBook model, you have, but it must be at least 5 years now.

  • I tried firefox update, but it is not compatible with leopard op. If I try to re - install the old version my favorites will always be there?

    I tried firefox update, but it is not compatible with leopard op. If I try to re - install the old version my favorites will always be there?

    Yes. This should not be a problem.

  • Thunderbird. Migration from Windows Mail (Win7) and Firefox 35.0.1 is not compatible with ImportExportTools of Mozilla Support

    Try to migrate from Windows Mail, NOT Windows Live Mail in Windows 7 Home Premium.
    When I try and import the messages I get the message ' ImportExportTools is not compatible with FireFox 35.0.1.
    I'm following the instructions at https://support.mozilla.org/en-US/kb/switching-thunderbird.

    Y at - it a compatible version?

    Concerning

    Chris Parker

    You can download the extension using Firefox.
    But you will need to install it in Thunderbird.
    http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

  • Why do I get and error when you try to install the calendar which is not compatible with firefox 34.0.5 lighting...

    I use firefox 34.0.5, my thunderbird is 31.3.0 and I am trying to install the lightning calendar. I checked the compatibility list. I downloaded the correct version of the lightning, and whenever I try to install any version it fails and gives me errors that this version is not compatible with firefox 34.0.5. I tried five different versions of lightning with the same results.

    It is an extension of Thunderbird e-mail client.
    https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/

  • I don't want the update - not compatible with Dashlane. Notice to quit.

    Update information tells me that the new update is not compatible with my Dashlane add - I depend for my home business. Yet, I get these reminders and notice each time that I use Firefox. I just want to stop! I would rather not uninstall Firefox and start using Safari as my main browser - but I will if I continue to be harassed.

    Thank you.

    See this support article.

    Simply select never check the updates (not recommended...)

  • Mail merge is not compatible with Firefox 31.01. How can I solve this problem?

    Hi everyone currently seeing this.

    I downloaded the mailing of the Add-ons for Thunderbird.
    I tried to install file in the page modules, and a message appears saying: mail merge could not be installed because it is not compatible with Firefox 31.01.

    Is someone can you please tell me what I can do to solve this problem.

    Thank you very much.
    J

    Maybe install it in Thunderbird

    Try the ideal here case http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

Maybe you are looking for