not able to boot from the CD

Similar Questions

• 7B BSOD error, 8400 and not able to boot from the disc...

  Hey, I'm workin on a dimension 8400 friends, and his pc yesterday gave a bsod Unmountable_boot_volume for the first time. now, for some reason any, that he was not able to load up on disk xp on his pc, it would just freeze, so I took the hard drive and it brought to my Dimension 5000 and did a CHKDSK Fixboot on it, and it loads perfectly fine on my pc (although none of my drivers are installed (, as well so that I can use any hardware...)

  in any case, I brought back th hdd in its 8400, put it in and got a new BSOD, 7B, which is right after u see a glow of the XP loading screen.

  Now I tried to put in the xp disk, but its hard drives are not recognized by the pc and won't boot anything. I'm not really sure what to do...

  At my disposal, I have a SATS 3.5 external connector, I can do anything to fix it on usb should be...

  If the ideas please?

  
  

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Portege Z30-C-10W - not able to boot from USB Windows 7 x 64 SP1

  Hello.

  I'm trying to recreate the image on this laptop via an installer USB that I created that has Windows 7 x 64 Enterprise SP1 on it.

  I was unable to boot from the USB Installer to the station via the F12 Boot menu.
  Setup the USB works on another laptop or PC.
  If I use a WIndows 10 x 64 USB Setup program that starts from the same laptop.

  I tried different options in the Bios, also tried resetting to default values, nothing helps.

  Anyone have any suggestions that I can not have tried?

  Having a similar problem can not get it to boot from a USB key.

• It is not possible to boot from the CD bootable on Satellite S5200-902

  Hello

  I have a Satellite S5200-902 and it was really good to use for me actually... Once I received a system error message and might start Windows more. Anyway... I tried to reinstall the OS, but I can't boot from the recovery CD. The CD is ok because I tried it on my other computer. I press F12 for the boot menu option it shows these items as HARD - disk drive - CD drive.

  I choose CD and nothing happens. He always tries to start from the HARD drive. I installed the Windows on the HD satellite on my other computer and it worked very well. He has installed the system but if I put the HD Toshiba Satellite does not start windows. It blocks the laptop.

  BIOS version is 1.30 and I don't know how to install and update the bios 1.8 or something on it, because I don't know how to install it without windows. I now have no idea how to go ahead?

  Can anyone here help me out please because I have no idea?
  Please someone help me ASAP because I need the laptop for work.
  Thank you

  Best regards.

  Hello

  It would be very interesting to know if you can boot from another CD, for example from the original CD of Microsoft.
  It s interesting because I would like to know if the drive of the laptop accept another CD.
  In my opinion, there is something wrong with the internal drive and so the laptop can not boot from the recovery CD.

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• Not possible to boot from the CD after installing Win XP on Tecra A3

  Hi all

  I can't boot from the CD more? I tried following things:
  -J' used several CDs to boot from, such as Windows XP, other CD CD WinXP or UBCD (ultimate Boot CD) and others to boot from.
  -J' chose in the start menu and the Bios first, the CD player must be started from.
  -Disabled the HARD, the LAN and the FDD drive so that only the CD must be started from, nothing else.
  -Press F12 after start-up und selected CD to boot from.
  -removed the battery
  -removed the disk drive HARD that the CD is only peripheral to start.
  -No available recovery disk.
  * Result: Always at top left corner a cursor flashing on a black ecran.*

  My story to this problem/question.
  -J' reinstalled Windows XP after the system became slow, with SP2 and SP3.
  -During the installation of SP3 and at the same time other pilot the system crashed.
  -Pressing F8 after starting, I can choose the Options to win.
  -System running days, several days without any reaction.
  -Sometimes, it goes into "secure mode" and freezes, no entry or possible reaction.

  I want to install Windows XP again from the CD and a clean version to work on.
  That means no two were leaving to work on alone.

  Can someone tell me why the CD player is with any media ignored inside and no departure from them is possible?

  Thanks for your help

  A strange question what s
  I put t know, but you did an update of the BIOS? Try it!

  Moreover, what laptop Tecra A do you have?

• Not able to print from the phone to printer

  My husband & I had the new iphone4s Apple. We also got a new printer Officejet 4622 around the same time. We have everything synced up to w / our PCs, iphones (2), & printer. It was great! As a first step, we could really print Photos, Documents, Etc. directly from anywhere from our phones on our printer sitting at home! But then we did not have our fax plugged in right (we were not able to send or receive a fax at all) so we "thought" was only what was necessary to connect to our fax to power send & receive a fax.

  Now as I said our Phones (2) DO NOT even give us the opportunity to send it to our printer at home more! Help, please!
  Thank you in advance!
  Stacy Bravo

  Hi Stacy,

  I'm sorry to hear that you cannot print from phone to a printer.

  (1) you are trying to print wireless?

  (2) what happens when you try to print?

  (3) you receive an error message/code?

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Of SSL VPN is not able to access from the outside

  Configuration SSL VPN, unable to access from outside, when trying to access the browser site, it says "cannot display the Page.

  Area basic firewall is configured, there must be something that I'm missing, please see the attached config.

  Any help please

  Looks like you will have to allow SSL VPN from the WAN traffic to the free zone (ZP-WAN-to-self), so you need to update the political map (PMAP-JM-WAN) in particular the ACL (ACL-VPN-PROTOCOL), must allow access to port 443 of any source IP address:

  permit tcp any  eq 443

  .. .should do the trick. Cheers, Seb.

• By getting Unattended.XML file not recognized when booting from the USB key dvd

  I have prepared without supervision. XML file and put it in the root of the USB stick and kept Windows 7 OEM DVD player. Mentioned the path of the file catalog in unattended mode. XML. active all USB ports in the BIOS settings. But without surveillance. XML file is not acknowledged at the start. What could be the possible problem here? Can someone help out me?

  Hello

  Please contact the Microsoft community.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/82410df7-2e70-47C7-a9dc-7dba7c17fbf8/autounattendxml-will-not-load-from-USB-HDD?Forum=w7itproinstall

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Not able to print from the computer. Windows 7.

  WiFi printer worked fine, now can not print from computer. Get the error message and when I cancel the document and present it again I have to keep getting an error message.  I ran the utility troubleshooting printer but that did not help. Have downloaded a new print driver, but that didn't help. Have also restarted the router. Seeing WiFi is turned on, on the printer and the computer. Printer copies and performs maintenance very well.  Help!

  I have an EPSON Stylus NX515 printer and an HP laptop and I am using Windows 7.

  Hello

  What is the exact error message that you receive?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I suggest you to see link and check.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• My product key is not accepted when booting from the recovery disc even if I use the product key supplied by the manufacturer.

  I wanted to clean up my computer so I copied the data on an external hard drive and then partitioned and formatted my hard drive is internal. I then ran the recovery CD provided when I bought the computer of Evesham Technology.  However, when I provide the product key which is glued on the case of my PC I get the message "the product Id you entered is not valid.  What should I do?

  Kind regards
  Eric

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Power output during the disk check currently not able to boot to the desktop

  Power output during the disk check.  Now, does nothing.

  I started my system, he said to check the disc. The disk check began, he had run for a while. Then my power is out for a few seconds. Once the power was back on that I tried to reboot and nothing. The monitor shows no info yet. Just black says no signal and turns off. I have no option to boot or anything else besides. What I can do. Thank you

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can connect the monitor to a different display port or connect another monitor if possible and check if it works very well.

  If the monitor is right, it implies that there is a problem with the graphics card or motherboard. In this scenario, I recommend you contact the manufacturer of your computer for help.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to save from the laptop to the office on a network.

  Hello

  I have 2 computers.

  The #1 computer is a Dell XPS 400 desktop that running Windows XP Media Center Edition Version 2002 with Service Pack 3 directly connected to a Linksys WRT54G wireless router with an Internet connection.

  The #2 computer in a Dell Studio 1737 laptop running Vista Home Premium with Service Pack 1, connect to the Internet and the desktop via the wireless router wirelessly.

  I have no problem, go out to the internet or to see the files and folders that I've shared desktop so that I can pull them up and change them to the laptop.

  The problem I have right now, it is that when I try to open, modify and then save a file on the desktop, I get an error message. Here are the steps that I tried to use a file TEST SAVE.txt that I created on the desktop in order to try to understand the problem.

  1. open the shortcut to my laptop in the folder that contains the TEST SAVE.txt. on my desk

  2. double-click on TEST SAVE.txt

  3. make a simple change in the document.

  4. choose Save in the file menu.

  Using this method, I get this error message.

  "Unable to create file name\TEST \\computer name\directory SAVE.txt.
  Make sure that the path and file name are correct.

  I also tried by repeating steps 1 to 3 above, but by choosing RECORD under in the file menu drop-down. When I do this it tells me that the file already exists, and I want to replace it. When I choose yes I get another error message saying the same thing as above.

  I checked to make sure that the files and folders on the desktop have been properly defined under attributes.

  No READ-ONLY checkbox.
  No hidden check box.

  Still no luck. Prolly something simple that I forgot, but any help in this would keep a few gray hairs to show.

  Thank you

  Hi Vlad70,

  Thanks for posting. Instead of using a shortcut to the file. Can you access the sharing, open it from there and see if you can save it?

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Not able to broadcast from the NPR through Windows Media Player 12 site

  I have Win Med Player 12. I can open it and play the songs in my library. However, when I try to listen to streaming NPR online, I get a response that says "loadong media player then to initialize". This message remains there forever. Anyone know what is happening?

  Original title: win Med Player 12 streaming?

  Hello

  Welcome to the Microsoft community.

  I understand that you are facing problems with Windows Media player 12 with streaming feature.

  Please answer these questions:

  1. Are you able to play other stations?
  2. The problem is specific to NPR?

  I suggest the NPR site and directly try the streaming feature and check if it works.

  Let us, run the troubleshooter in the Windows Media Player settings and check if it helps. This utility checks the configuration settings and network for Windows Media Player to ensure that you can play the content you downloaded and saved on your computer, or content streaming over a network or the Internet.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Keep us once perform you troubleshooting. Feel free to get back to us for assistance.