Not able to configure the network on ESXi (Dell Optiplex 755), how to get a shell prompt to configure the network card or check?

Any knows is Dell Optiplex 755 is compitable with ESXi server?

When I want to install ESX 3.5 update 3 on the Dell Optiplex 755, it detects drive hsrd (WD), I don't know what to do?

ESXi is detecting disc hard but not able to configure network & with ESX 3.5 update 3 does not detect the hard drive.

Comment (I have 2 HDD on the system, 250 GB WD & WD 1 TB).

Help please.

Kind regards

Mustafa Rashid

SATA, who worked at the 2 update driver update changed 3.  So, you may be able to work around the problem of disk with a modified file, you can probably find at vm-help, but you will still need a NIC for networking.

-KjB

VMware vExpert

Tags: VMware

Similar Questions

  • I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

    Internet, not able to browse computers on the network

    The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

    I'm puzzled.

    Hello

    I suggest you to send your request in the below link.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  • When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

    When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

    original title: list of Network Service does not illuminate

    Hi SikDude,

    Please use the Forum of the community for Vista.

    Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

    Please let us know if we can do something else.

    Matt
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

    Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

    Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

    Hello

     
    You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
    Put your boot system helps determine if third-party applications or startup items are causing the problem.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
    If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
    Reference:
     
     
     
     
  • Not able to play the CD in Windows Media Player - configuration setting may be malfunctioning

    Original title: not able to play the CD in Windows Media Player

    I have windows 8.1 with 12 player, but he won't play any CD it will play the from the internet, music of assistance

    Hi Stuart,

    Thank you for your response.

    I really appreciate for all the troubleshooting steps you have tried so far and going forward I would refer to the suggestions of Bennet Martin a. replied on June 7, 2013

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Media-Player-configuration-settings-set/1667db58-d4f6-4259-8649-da53baebb1a2

    I hope this helps. Please return us with the State, we will be happy to help you with your new.

  • I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

    Connection to the local network - properties dialog box

    Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

    Hello Rajaneer,

    Is the computer that you are using a personal computer or a work computer?
    You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  • Printers / HP Photosmart 5520: my printer asked a password am not able to find the password or reset an another pls help

    my printer was asking a password am not able to find the password or reset an another pls help

    I've used it since December when I bought the printer, but I just changemy internet company

    It was when he said ask for password which i don't remember not pls help.

    I can be paid to [personal information deleted]

    Hi @funmi09

    I want to help you set up your printer for your internet company recently changed. This document provides the steps necessary to find the WEP key or WPA or your wireless network password.

    Once you retrieve your password, the following will help you to configure the printer; Connection of the printer after you have changed your wireless network.

    If you still can't find your password, you will need to contact your ISP (internet service provider).

    I hope this helps.

  • Not able to add the snapshot file to the virtual machine

    We have Win 2003 virtual machine running on ESXi 4.0.0 261974. The virtual machine has two vmdk files. We had taken the snapshot a few days back and today by mistake, we have removed one of the vmdk (DB - srv - 000001.vmdk - snapshot file). Now, we are not able to add the snapshot file to the virtual machine. When tried to add the existing vmdk, it displays only the source disk (DB - srv.vmdk). Please, help us to solve this problem.

    The GUI allows only adding the base vmdk. To add the Flash disk, you must manually change the vmx file. Registrations for the formerly removed virtual disk could still exist in the vmx file with... .present = "FALSE". After changing the vmx file you must reload the configuration. To do this, remove the VM of the inventory and add it back again (right-click on the vmx file).

    André

  • Not able to install the common module on satellite Pro A120

    Hi guys:
    I recently reinstalled xp professional on my satellite pro A120. I could download and install the main drivers of http://uk.computers.toshiba-europe.com and my phone is functional. However, I did not all sounds and (F6 & F7 and toggle) function keys not working, even after insalling the sound card. I read some of the posts on this forum and found that I needed insall the 'common' module to make them functional. I downloaded the driver from module common too, but when I run the Setup it starts initially, but fails both the configuration is complete.

    The same thing happens also with a few other drivers as saver of energy etc... I was not able to run the Setup program for the common module & driver power saver, basically, nothing happens after I have the respective installation.

    Can anyone help please?

    Pravesh

    As far as I know on the download page you can find the installation instructions with exact installation document order how to install drivers and tools specific to Toshiba and utilities.
    You have installed all the stuff after this installation order?

  • RN204: TB 2 x 4 and 1 x 2 and 1 x 3 TB - not able to use the full capacity

    OS: 6.4.1

    Hello

    I spent many hours up to now to gather without success. The calculator RAID netgear said 8.16 TB in X-Raid and Flex - Raid 5 with my combination of hard drives, but I'm not able to put in place. As I want to use the encryption I started with a Flex - Raid 5 with 4 hard drives, resulting in a volume< 6="" tb="" (4x="" 2="" tb="" as="" raid="" 5)="" and="" i'm="" not="" able="" to="" use="" the="" capacity="">

    What is the right way to configure the system with full capacity of 8.16 TB (perhaps with several volumes)? I do not know more what to try and to reset the system and let X-Raid decide will not work because you cannot configure X-Raid with encryption.

    I think that to use the entire space, we need something like:

    RAID 5 on all 4 hard drives with 2 TB = 6 TB of usable capacity

    RAID 5 on 3 hard disks with a capacity of 1 TB = 2 TB

    RAID 1 on 2 hard drives with a capacity of 1 TB = 1 to

    But HOW? Don't see no way to add a volume because all HDDs are 'blue', they do not serve at full capacity!

    Here my current situation started with all the devices that have been installed since the beginning (it is not a HARD extended drive configuration).

    It is excactly what I expect it works when buying the RN204. But this device is now on its way to Amazon and my new QNAP 431 + initialization of disks now!

    Thanks for all your help!

  • OfficeJet 6600. Works as a printer, but not able to start the scanner.

    OfficeJet 6600. Works as a printer, but not able to start the scanner.

    I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

    I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

    Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

    But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

    However, despite the property intellectual not recognized the device functioning as a "printer".

    But I need to use it as a scanner.

    Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

    Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

    Can someone, please?

    Thank you in advance.

    Hey,.

    Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

    Have a great day!

  • Not able to keep the IP STATIC address' 'Windows '.

    Hello.. I'm not able to change the static IP address in my Windows Server 2012 Standard R2 64 bit system.

    I follow the steps below:
    1. disable the Ethernet (name of the VM network)
    2. access to the IPv4 properties;
    3. setting the following value:
    (i) use the following IP address:

    a. intellectual property:

    b. subnet Mask: 255.255.255.0
    c. default Gateway:<>
    (ii) use the following DNS server address:
    a. preferred DNS server: 127.0.0.1
    (iii) validate the output parameters: true
    4. click on Ok.
    5. click on Ok.

    After that, he tries to change the IP address. But the DHCP service is disabled; Internet no longer works and he asks that "let windows detect the settings of the system." If you click ok, the IP address is once again is changed in 192.168.2.17.

    But if I change the IP from 192.168.2.18 to 192.168.2.15, and then also in the internet stops working.

    Seuugest nicely.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • I'm not able to access the help and support on my xp based computer.

    I have Windows XP Home Edition. I deleted some old programs using Add / Remove button in the control settings.  Also installed an antivirus program.  I noticed that the I help support button is unresponsive and I'm not able to access the system restore.  How can I solve this problem?

    Hello

    1. have you made changes on the computer recently?
    2. what happens when you run the system restore?

    Method 1.
    Let us first start the sfc scan and check if there are any file system corruption.
    a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    b. type the following command and press ENTER:
    sfc/scannow
    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
     
    More information on SFC scan found in this document:
    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
    http://support.Microsoft.com/kb/310747

    Method 2.
    If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
    How to create and configure user accounts in Windows XP
    http://support.Microsoft.com/kb/279783

    How to copy data from a corrupted to a new profile in Windows XP user profile
    http://support.Microsoft.com/kb/811151

    How to recover damaged Windows XP user profile
    http://support.Microsoft.com/kb/555473

    I hope this helps.

  • I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC.

    Original title: upgrade

    I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?

    Hello

    You buy Windows 10, as there is no free upgrade to Vista 10.

    https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

    Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

    http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

    But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

    https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

    Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

    "FAQ Windows 10.

    http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

    See you soon.

  • Windows is not able to load the selected for the following reason of backup set

    Hello;
     
    I did run a daily backup to a computer in a network with windows backup and Restore Center. the hard drive crashed on this computer and we had to install another. When I try and use advanced restore / backup made on a different computer, I can navigate to the backup on the network computer folder but when I select the folder and click Next it gives me an error:
     
    I get: Windows is not able to load the backup game selected for the following reason:

    There is a problem with the backup catalog... 0x810000E5... restore from a different place...

    Just to add additional information; The computer with the replaced hard drive running Vista family premium, the path to the backup file is \\HPDESKTOP\Public\Backup\Bobruncer-pc\.

    There is another folder under Bobruncer-pc called Bobruncer-pc and all the backup files. I restore from the correct location? Also, the backup folder is 226 concerts but the backups were made from a hard drive of 80 GB... should I worry about this too?

    Thank you

    Dave

    Hi Colt4t5,

    Just to clarify, perform you a complete PC Backup or backup and restore?

    When you do return, and restore, it can be saved as a .zip file in the backup folder. You can decompress the file and retrieve the required files.

    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

    Back up and restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    I hope this helps.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Maybe you are looking for