Not able to connect the AIR-tour 1041N-A-K9 using windows 8

Hello

I use AIR-TOUR 1041N-A-K9 wireless Accesspoint it was controlled using the command Air-CT2504-k9 wireless.

When I tried to connect to the access point using the Windows 8 machine was not able to connect,

Is there someone who faced the same problem.

Hello

There is a known bug with Windows 8 connectivitiy problems with Cisco UWN.

https://supportforums.Cisco.com/docs/doc-27213

Can you please try the solution proposed in the document and see if it works?

HTH,

Patrick

Tags: Cisco Wireless

Similar Questions

  • Not able to connect the second monitor

    Original title: Second monitor visible only on the first plugin

    Implementation:

    New (Nov 2014) Lenovo PC

    AMD A8 H535

    Windows 8.1

    AMD Radeon HD D 7560 w / VGA output and an HDMI output

    Two HP w1907 monitors (resolution is identical on both screens - when they work together)

    Question:

    Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

    I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

    Hello

     
    I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
     
    So I suggest to follow the steps mentioned below and check if help them.
     
    Method 1
    Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
    Plug a second monitor or projector

    Method 2

    Install all Windows updates and check if it solves the problem. You can check the below link to do.
    Windows Update: frequently asked Questions
     
    If problem still persists, go to method 3.
    Method 3
    Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.

    Uninstall the display driver, then reinstall it. Follow the steps
    mentioned below to uninstall:
    1. press Windows + R, type devmgmt.msc , and then click ok.
    2. now, find and click with the right button on the display driver and click Uninstall.

    Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

    Hope this information helps. Please get back to us if you need further assistance.

  • Not able to connect the earpiece/headset Bluetooth for Wndows 7 Enterprise (64-bit)

    I tried to connect a new Bluetooth headset to my laptop Lenovo T420.

    The laptop runs on Windows 7 Enterprise SP1 (64 bit OS).

    The laptop has built-in Bluetooth adapter and I turned on.

    Also, I went ON my helmet and guarded in discovery mode.

    After that, I added the helmet using the button 'Add a device' from the control panel-> devices and printers.

    Windows 7 installed the drivers required and the headset is successfully added.

    Now, I tried to connect to the headset using Bluetooth configuration dialog window.

    I did a right click on the icon of headset to Panel-> devices and printers.

    The right click is not display the option 'control' for the headphones.

    He showed that other options - "Create a shortcut", "Troubleshooting", "Remove the instrument", "Properties".

    So, I won't be able to connect my Bluetooth headset.

    I tried the same helmet on my friend's laptop computer.

    His laptop is running on Windows 7 Home Edition (32 bit OS).

    The connected properly Bluetooth headset and the option 'control' is also available on the right click.

    The 'control' option provided the Bluetooth configuration dialog window where I can use the "connect" button to connect the headset.

    Kindly let me know the resolution of the issue.

    If your computer has built-in Bluetooth features, you can enable or disable the functions by pressing on Fn + F5. If you press Fn + F5, a list of the wireless features is displayed in the window Radio wireless.

    You can enable or disable the Bluetooth features with a single click.

    To use the Bluetooth features, double-click the icon of Bluetooth Favorites on the desktop and follow the instructions on the screen.

    You can use the Wireless Radio switch to disable Bluetooth features. The wireless radio switch is usually located on the front of the machine. If you have trouble with the Bluetooth, make sure that the wireless Radio switch is set to position it.

    Source: http://support.lenovo.com/us/en/documents/ht037001

    What is the number and the model of the Bluetooth headset? Enter the number of brand and model of your Bluetooth device in the search field provided in the link below, to see if there are compatibility problems reported.

    Windows Compatibility Center.

    http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=windows%207&Type=Both&CurrentPage=1&TotalPages=133&ShowCriteria=0&Compatibility=Unknown&ProductName=windows%207

  • "Error 734 PPP link control led" not able to connect the Nokia N73 to internet.

    Original title; Error 734 couldn't find a solution.

    I'm using Windows 7 Ultimate and Nokia N73 to connect to Internet. But I can not connect because the error message "Error 734 PPP link control has been terminated" is displayed. I've disabled the box negotiate Multilink for single link connections and tried again. But the error is still exist. How to solve this problem?

    Hello AhamedSajad,

    You did it changes on your computer that may have caused the connection to stop working?
    I suggest starting with a system restore to a time where the connection was working:
  • Not able to connect the modem to the computer running Windows XP.

    Original title: I need help with my modom.

    My computer is not finding my modom.

    Hi RonaldCouch,

    1. What is the brand and model of the modem?

    2 did you connect the modem to your computer as soon as possible?

    You can follow these links & check if it helps.

    Connect using your modem

    Troubleshooting cable modems

    Hope the helps of information.
    Please post back and we do know.

  • After that I changed the Duplex parameter on NIC's Service console, I am not able to connect the ESX host

    Hi all

    Please help solve my problem.

    After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.

    Concerning

    Vijay

    Hello

    As the bulb you have two problems that are not related.

    (1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.

    (2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote.  The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.

    The two problems are fixable by booting into single-user mode, set the duplex and reset the password.

    Best regards
    Edward L. Haletky
    VMware communities user moderator
    ====
    Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
    Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

  • I am not able to adjust the area of focus when you use the shift and tilt feature.

    I tried several times checked internet, watched the tutorials, rechecked my system, it just doesn't work.

    You can get a more precise effect using the standard brush. After clicking on the first tour box change to apply the blur tilt/shift go to:

    File > save as

    Save a copy of the PSD and then go to Expert mode.

    Make sure that the black mask thumbnail is selected (highlighted) in the layers palette and choose the Brush tool with white color (top) chip value try to brush off with a low opacity.

  • I am not able to connect the microsoft 5000 comfort after replacement of the cylinder head box

    The most original receiver that came with my keyboard Microsoft Comfort Keyboard and Mouse 5000 was lost. I bought another but I can't be connect with new cylinder head box. There are no buttons to push to try to sync, what should I do?

    Hello

    Take the battery out of a set because they can interfere with each other. On the basis of each mouse
    should be a little button that you can push with a pen point or a trombone (small white button near the battery
    door on the lower right side of mouse with Microsoft at the top). On the bottom of the keyboard here as in a
    button probably labeled 'Channel Connect'.

    When you press buttons on the receiver lights should Flash for a few seconds in rotation.

    Make sure you have the latest version of the Intellipoint and Intellitype software.

    IntelliType and Intellipoint - free
    http://www.Microsoft.com/hardware/download/download.aspx?category=MK

    Wireless Optical 5000
    http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=052

    There are 3 years warranty on the game in case you need assistance. Support for 90 days
    start at the end for 1 claim of warranty or incident.

    Hardware support of MS and warranty claims
    Tech Support 1-800-936-5700 for MS Hardware.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Not able to view the files in Windows XP after installing Ubuntu 10.10.

    Original title: problem opening of windows.

    I installed ubuntu 10.10 on my system unfortunately it took total hard drive in a single partition and now I am not able to access microsoft windows. What to do there are a lot of important files in that partition. I am not able to view the files that have been seen in windows. Please suggest.
    concerning
    Hari

    Hi hari,.

    It seems that Ubuntu has supported the installation of Windows. At this point, I would recommend youto contact support Ubuntu uninstall Ubuntu. This should return Windows XP & you can access your files.

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I'm not able to see the file in the facebook using Windows Phone group.

    I'm not able to see the file in facebook groups. Using Facebook for windows phone v5. Someone please help me

    Hello

    It seems that your problem is specifically related to Facebook.

    I suggest you contact the Support of Facebook for support on this.

    Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  • I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    only title bar opens and nothing else... Please help

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Also check the cookie exceptions.

  • 2000-2314TU HP: not able to connect to the LAN and Wireless network

    Hello

    I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

    You are the very welcome.

  • Not able to connect to the server with modem 56 k

    I try to connect my Tecra via modem 56 k Internet.
    Also, I tried with another computer laptop with the same details and that worked.
    But when I try it on my Tecra I get an error that is not able to connect to the server.

    So I think that it is a parameter that is not defined correctly for the modem.
    (If you compare it to another laptop all parameters are the same as windows).

    Thanks in advance,

    Theo

    Hello Theo

    Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

    After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

  • I am not able to connect to the main wifi network but can connect to the network of comments.

    Hello

    This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

    The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

    Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

    Wait a minute

    Turn on the modem first and leave a few minutes, he managed by itself

    Turn on the next device that is connected to a modem and leaves turn a good minute

    Keep turn on devices one by one at a time, one minute apart, until the entire network is back

    Recheck the network and report on your results

  • not able to connect to the game of google on mobile data store

    I bought gold x 2 lenovo 32 GB vibe.

    in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

    Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

    and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

    Please give the solution.


Maybe you are looking for

  • cannot expand the c partition in unallocated space

    I have a HP Pavilion dv5224nr laptop running Windows XP.  I've been low on disk space, so I came on this forum to find out how to remove the recovery partition, since I have the recovery CD from HP.  Now that I deleted the partition through disk mana

  • unstable desktop in vista

    Hello I created a desktop windows with LabVIEW 8.2.1 application which I scoured his built exe file. In XP and Windows 7, there is no problem, but in Vista, it is unstable. After some little time that they run, he has a problem and it must be closed,

  • Went quick launch

    XP Pro SP3. Two monitors. Left, one is the main. Don't know what happened. My quick launch area disappeared. I have looked in the help and aid section and made the following help and section for help: To display the Quick Launch bar Right-click the t

  • Two Anti Virus Applications on the A2109

    I've read here to get to the root of the A2109 to remove the bloatware and unwanted applications.My question is this, you can remove the Norton App without having to the root of the Tablet? And if can't even put on my Anti Virus Application that it b

  • Change the default value for the field selection at run time

    I would like to know how can I keep persistent information in Sib. My problem is I want to change the default value of the choice field when running so that when the user starts the application again, it can retrieve the new default value.