Not able to connect to new router: WEP / WPA2 problems

Similar Questions

• Not able to connect to internet router

  BEFSR41 ver 4.3 - the installation cd seems to be faulty at step 9. I went in the page setup and can now get to step11, but then I get a message that the router is not able to connect to the internet. I have a netopia modem (United 3300 series), my ISP is Centurytel. When I check the status it says connection, but never connected. Help, please!

  Good to hear, thanks for posting back.

  Please mark resolved forum and all posts Cudo feel worthy.

• Not able to connect to restart/profile/finder keychain problems

  I am able to connect to my user profile on my iMac (27-inch, late 2013) using OS X 10.11.4.  The first thing that appears is ' Keychain 'login' is not found to store 'localdevicexxxxx-AuthToken.' " "Followed by several other errors in keychain.  Then Finder continuously restarts / the office/bar along the top icons flashes (the dock is still there).  I can't use Alfred to start Contacts if I'm fast enough between Finder restart, but nothing else will start.  I was able to connect to the guest profile and to create another Admin account without problem, but is the difficulty of my profile.  I've been Googling for a bit, but have developed dry.  Hoping you guys have any suggestions!   Thank you!

  By far the best way to solve this problem would be to restore from a backup previous to it. You have such a backup?

• My local network is not sending data but receiving. I am not able to connect to internet

  My local network is not sending data but receiving. I am not able to connect to the internet. No problem on my side of the seller.

  conduct a search on the internet, nothing works

  Hi Kaushal,

  1. What is the accurate and complete error message you get?
  2. don't you make changes to the computer before the show?
  3. which antivirus is installed on the computer?

  I suggest you try the steps from the following link:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• My iPad is not able to connect to my wi - fi network. I made an update to my router on my first laptop and I can't get an internet connecction on my iPad.

  My iPad is not able to connect to my wi - fi network.  I made an update to my router on my first laptop and I can't get an internet connecction on my iPad.  I'm invited to a password, but don't know what it is.  I'm looking for the password?

  Assuming that you have a wireless router at home that you need to know the wireless network SSID, encryption type (IE. WPA2 or WPA for example) and the encryption key and password / password.

  Many routers appear encryption key wireless to plain text. Copy in the iPad. Check the router site users manual or support to help manufacturers to enter the config pages.

  If the router does not have the key, you can also see in the properties Win 7 Wireless for your home network. Open network and sharing Center and click on Manage wireless networks left. Right click on your wireless network and select Properties. Click theSecurity tab and checkShow characters . Provide the administrator password to see the key.

  http://sdrv.Ms/Spor94

  More help from Apple...

  http://www.Apple.com/support/iPad/Assistant/WiFi/

  Apple iPad WiFi support forums...

  https://discussions.Apple.com/community/iPad/using_ipad?view=discussions#/?tagSet=1188

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• Not able to connect to Wifi, USB ports, bluetooth

  Hello team

  I bought the new HP laptop today. I have installed Windows 7 OS. I am not able to connect to Wifi, not be able to use the blue tooth, not be connected to the USB. I downloaded the drivers from the website of the other computer. But how can I install it with one of them works. Please help us on the question mentioned.

  Product number: G8D85PA #ACJ

  Thank you

  Sunil

  Hi Sunil_motukuri,

  Thank you for visiting the Forums HP's Support and Welcome.I would be happy to help you. I read your thread on your computer laptop 15-g030au HP and who need wireless for Windows 7 drivers. Here is a link to the drivers.

  Hope this helps you.

  Thank you.

• Suggestions to connect a new router to the Modem to an ISP

  
  

  Quite true for some ISPS like Insight.  Before Comcast took over in the box of my son, he had to go through a documented process of insight to connect any other device (router) Insight to the cable modem.  My experience with RoadRunner TimeWarner/Brighthouse when you connect a new router to their cable modems has been that they will assign a new IP address to the new router and will retain the previous pair of IP/MAC address of my router for 30 days before the purge of their DHCP database.  It is very convenient when I setup the router for my friends and then reconnect my router to the network and get my original IP address assigned.  Once I finished the configuration of the router from my friend and connected to its network access, I contact Brighthouse to let them know that they can release the IP address assigned to the router of my friend.  Not all ISPS is more conciliatory than TimeWarner/Brighthouse in this area.

  I also take advantage of this "ability" to Brighthouse when I test backup WRT54G at my new WiFi E3000 router on a periodic basis.

  In short, always contact your ISP to see what procedures must be followed when you want to connect another router to the modem.

• I am not able to connect to ePrint

  I am not able to connect to ePrint, after entering the user name and password a new window appears, advise to click on the connected HP. After clicking on the button I get error 404, page not found.

  Not either of the 5 applications that are installed on the printer, not working, by selecting I see apps update... Please wait and then cancel.

  Can anyone help?

  Thank you

  Hi hp323,

  Welcome to the HP Support forums.  I understand that you are unable to get to work on your printer Photosmart 7520 applications and that you can not connect to connected HP.

  Connected HP was rolled out for the United States and the United Kingdom.  Please try connecting HP ePrintCenter with one country other than the United States or the United Kingdom as your choice of countries (which can be chosen in the lower left corner of the screen, please see the screen capture below).  Who will stop the redirection to connected HP.  What happens, is that you try to connect to the USA/UK ePrintCenter, which automatically redirects.  Redirection is help the country from the computer and tries to redirect to HP related to your country and it fails because there is not a HP connected to your country.

  

  Regarding applications, HP is aware of the problem and working on a solution. It is recommended that you have your updates of product set to automatic on the front of the printer in order to receive the update as soon as it is available. If you wish to discuss with a phone support agent, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region, please click the link below to find technical support for your country/region number.

• not being is not able to connect it says unable to load the user profile

  not being not able to connect it said could not load user profile and then the computer automatically disconnects me trying

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Renamed user AD not able to connect

  Hi guys

  I have a problem with a user with access to vFoglight through LDAP authentication. The user was renamed to AD. (name changed)

  After the name change, the user is not able to connect.

  In the audit trail, the user is first OK authenticated, and then in the same second there is a connection FAILURE.

  I tried to remove the user from the vFoglight, wait for a while and then try to connect again.

  I checked on the AD domain controller, and the user is authenticated OK

  What is a SQL question?

  Any ideas?

  Hi, Lars

  I hope you get a solution to your problem, but someone else might have the same problem,.

  I will be the top my solution to the problem that just had.

  We are in a process to rename all connections of users I have AD...

  And once a connection of users has been renamed to AD, the user could not log on.

  With no errors in the journal errror FMS or on our advertising servers.

  New users was created in correct Foglight, but when the user tried to log on, but still had a connection error.

  I found a solution that works for us.

  I found that when I turned on debugging on FMS, I got this error message in the error log:

  Cannot insert duplicate in the "dbo.sec_user_alias" object key The duplicate key value is (Michael dry).

  We run the Foglight database on a Microsoft SQL Server, so I looked in the sec_user_alias of the table,

  and even that I had deleted the former user in Foglight, the login name and the username was still in this table:

  userAlias username isdeleted

  str_xxx Michael dry F

  So I just update the table of user with this name:

  UPDATE sec_user_alias

  SET username = 'Michael dry - old'

  WHERE useralias = "str_xxx."

  and then I could connect with the new login user name,

  but all the settings for this user and config disappeared...

  And as I have not talked with Quest/Dell about this, I don't know if this is allowed to do.

  and I don't take any responsibility that it will work in your configuration.

  Best regards.

  Michael

  Update: I found this: Knowledge Article 85132 - 'LDAP user cannot connect after LDAP name changed"- https://support.quest.com/SolutionDetail.aspx?id=SOL85132

  Post edited by: Michael dry

• not able to connect to windows update

  Win 7 pro 64-bit, sp2 after windows installed 10 has not not able to connect to update server. When an attempt is made to trust installation and a host file resume all cycles of memory and cpu and it will continue to do that too long current arrives at the machine.

  I ran fixit, check tools sfc, 3 different types of root kit tools and PGE antivirus both offline and online, new installation did not help, formatting the drive did not help.

  support Microsoft is still without knowing what is really the issue. If you can help would like assistance

  This problem seems to be related to a windows installation failed 10 what I finally did after a month of working with microsoft is I went to the microsoft update catalog site and downloaded and installed an update stand-alone said to improve the State of update and after about 4 hours it installed and downloaded updates.

  It's the microsoft catalog https://catalog.update.microsoft.com/v7/site/home.aspx

  hope that this help anyone having this problem.