Not able to connect wireless dv6000 system says local access only

Similar Questions

• Wmp54g - Wireless-G PCI Adapter - Local access only - why?

  Management of Linksys, I replaced one of the adapters Wireless USB model with this model (WMP54G - Wireless-G PCI Adapter).  While the USB model has been able to get on the internet, but by dint of low signal at slow speed resulting - this unit has a sound intense but failed to get on the internet.  (Well, actually I managed to make it work once or twice but it still does not work.)

  I am running Vista.

  I get a green line of my local network computer in network and sharing Center, then a black line with a RED X between my local network and internet.

  I'm unable to access Web sites on the internet.

  I was on the phone with LinkSys support for hours.  They were not able to make the situation better.  Anyone has any ideas, what happens?

  It seems that we have found the solution to this problem.

  The engineer last I talked to Linksys suspects that the problem had to do with the Linksys and Vista software both trying to control the device.

  (As a side how many times have you had to happen?)  If you're like me this is not the first - one might think, the manufacturers and Microsoft could get this sorted out once and for all and have a duration of commitment for their respective products).

  Unfortunately, the steps to follow recommended action was to open the programs installed on the computer, look for the Linksys program via the control panel and remove it.

  Then restart the machine.  After startup, the machine, reports that it has detected a hardware without a driver.

  Insert the CD into the drive and have Vista, find the driver and install it.

  She does without having to install the full program of Linksys.

  It has now worked two days and seems to have solved the problem.

  He too far too many calls (8) including 50% of them being stripped of Linksys to get to this answer and several days, but unfortunately we seem to have solved.

• HP Photosmart Prem C410 printing impossible - not able to connect wireless not

  My HP Photosmart Prem c410 initial printer setup - unable to connect to my wireless network. The password is good. He has no address MAC filtering on my wireless router. Help. ;-)

  Called the 800 support number. All landing on perhaps an older wireless router and maybe drive to get a newer version, somehow I went to the printer, it was connected? Do not know how. I really do not care now. printing, remote printing from my pc with the ipad2 email - very cool. Everything works now! Thanks for all the HP help, online and on the phone. Very cool device. Signing.   Dave

• 2000-2314TU HP: not able to connect to the LAN and Wireless network

  Hello

  I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

  You are the very welcome.

• not being is not able to connect it says unable to load the user profile

  not being not able to connect it said could not load user profile and then the computer automatically disconnects me trying

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• I am not able to connect on one of my computers, my network error message saying: unknown username or bad password.

  Journal of the network questions

  I am not able to connect to my network to one of my computers.  I enter the username and password (same as to log the computer - correct?), and yet I get the newspaper no failure message saying unknown user name or bad password.  What can I do?

  go to the Properties window (right click computer and select properties) is the only registered owner your name on the first pc and your first and last on the second?

• I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

  I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

  Maybe this?

  http://support.Microsoft.com/kb/310049

  Assuming you are using Outlook, which you failed to mention

  Thank you very much, it worked! Yes, I use Outlook, sorry I mentioned not just but good guess. Thank you very much for the help.

• not able to connect database to another user of the operating system using the remote?

  Hello
  
  I want to connect database to another user of the operating system. I am able to connect Oracle database to the outside. but not able to connect different OS user.
  
  
  
  As an ORACLE user:
  
  [oracle@test1 admin] $ sqlplus /.
  
  SQL * more: Production of the 11.2.0.2.0 version on Mon Jan 16 19:41:57 2012
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL >
  
  
  
  User not ORACLE:
  
  [sample@test1 ~] $ export ORACLE_HOME=/u01/app/oracle/product/11.2.0.2/
  [sample@test1 ~] $ export ORACLE_SID = rman
  [sample@test1 ~] $ export PATH = $ORACLE_HOME/bin: $PATH
  [sample@test1 ~] $ sqlplus /.
  
  SQL * more: Production of the 11.2.0.2.0 version on Mon Jan 16 19:37:42 2012
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0
  
  
  Enter the user name:
  
  
  
  Thank you

  Make sure ORACLE_HOME is exactly the same between 2 environments: note that an end "/" is not necessary and that ending ' / ' could trigger ORA-01034.

• Not able to connect to the homegroup, it requires username and password

  Original title: h/group connection on my year old d/top & my l/top 6 months, does not. Says I need a/c p/word-WHERE is it? I need to change the system time that is differs from earlier local. - thank you - Stantheman

  Both computers are windows 7. Recently uploaded photo gallery on both, but because they won't talk to each other, I have to copy / paste from one to the other...

  I'm 79 and reasonable computer. Daughter 51 tried very hard, but without success.

  Hi Stanley,

  Welcome to the Microsoft community. As you are not able to connect to the Homegroup, answering a question that helps us provide the best solution:

  What antivirus software do you use?

  Here are a few steps to try:

  Visit the link to check if the homegroup settings is set correctly:

  Homegroup from start to finish
  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  Method 1:
  Visit the link and try the troubleshooter.
  Open the homegroup troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Visit the link to learn more ways to connect to the Homegroup.

  Why I can't join a homegroup?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.

• Not able to connect to the essbase server: error 10061 NW

  Hi all

  I am currently working on Hyperion 11.1.2.3 and have installed Hyperion essbase and planning for the same thing. Until a few days back I was able to connect to my server essbase in environmental assessments, but now it gives me error that says: error: 1042006: Network error [10061]: unable to connect to [WIN - 1K6GBOF63C0:1423], where WIN-1K6GBOF63C0 is my machine name.

  Here is an excerpt of what I got from the newspapers essbase

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051283)

  Recovery of license information, please wait...

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051286)

  The license retrieved information.

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1051227)

  No JVM location specified in essbase.cfg. Will attempt to load the library path

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1311019)

  During the initialization of the JVM classpath: [; C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051223)

  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: getInstance: impossible to get the instance of CSSSystem, please visit SharedServices_Security_Client.log for more information]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051198)

  Single Sign-On initialization failed!

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1056815)

  Essbase 64-bit - version 11.1.2 (ESB11.1.2.3.000B4412)

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051232)

  Using English_UnitedStates.Latin1@Binary as the locale Essbase

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051683)

  Try to recover the login information from the registry failed. Please check the reg.properties file, and then try again.

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051527)

  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.

  I am able to open the workspace's shared services, but see the following in the Sharedservices_securityclient log

  [2015 07-12 T 00: 26:41.418 - 07:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A6jgDwW05zzWByW1LcXQY000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] failed to initialize the instance security EMP of Shared Services. Component marchandises9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is set to null in the EMP system registry. Check the configuration of the EMP system registry.

  [2015 07-12 T 00: 28:51.332 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:51.403 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20002] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.EPMSystem] [SRC_METHOD: getInstance] instance of security during the initialization of the SSP using the EMP system registry. It is a status messages. No action required.

  [2015 07-12 T 00: 28:52.340 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.184 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.606 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20005] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] started asynchronous user directory cache building user native Directory directory. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 12] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0:3] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 1. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20331] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] building Cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20332] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] unify done cache and the object is set to the cached cache manager. It is a status messages. No action required.

  Any help is appreciated here.

  Thank you

  Dev

  The error being generated using relates to Essbase is not able to connect to the registry of SSP database, or the database is corrupt.

  Are a set of services to automatic, maybe that the database has not increased and running prior to Essbase trying to boot against the register of Shared Services.

  Confirm the relational database is finally up and running and you can connect, then clear the Essbase logs, start Essbase, and post again the same newspapers.

  See you soon

  John

• Satellite L650-11R - not able to connect to public networks

  Hello.

  Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.

  I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.

  Any suggestions?

  It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.

  Try to compare the LAN settings with others who use the same operating system.

• my ipod nano is not able to connect to itunes.

  my ipod nano is not able to connect to itunes.

  What version of Nano? What kind of computer? What operating system on the computer? What happens when you try to connect?

• not able to connect to the game of google on mobile data store

  I bought gold x 2 lenovo 32 GB vibe.

  in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

  Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

  and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

  Please give the solution.

  
  

• Not able to connect to Wifi, USB ports, bluetooth

  Hello team

  I bought the new HP laptop today. I have installed Windows 7 OS. I am not able to connect to Wifi, not be able to use the blue tooth, not be connected to the USB. I downloaded the drivers from the website of the other computer. But how can I install it with one of them works. Please help us on the question mentioned.

  Product number: G8D85PA #ACJ

  Thank you

  Sunil

  Hi Sunil_motukuri,

  Thank you for visiting the Forums HP's Support and Welcome.I would be happy to help you. I read your thread on your computer laptop 15-g030au HP and who need wireless for Windows 7 drivers. Here is a link to the drivers.

  Hope this helps you.

  Thank you.