Not able to connect with the Security Server

Similar Questions

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Not able to connect to the essbase server: error 10061 NW

  Hi all

  I am currently working on Hyperion 11.1.2.3 and have installed Hyperion essbase and planning for the same thing. Until a few days back I was able to connect to my server essbase in environmental assessments, but now it gives me error that says: error: 1042006: Network error [10061]: unable to connect to [WIN - 1K6GBOF63C0:1423], where WIN-1K6GBOF63C0 is my machine name.

  Here is an excerpt of what I got from the newspapers essbase

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051283)

  Recovery of license information, please wait...

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051286)

  The license retrieved information.

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1051227)

  No JVM location specified in essbase.cfg. Will attempt to load the library path

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1311019)

  During the initialization of the JVM classpath: [; C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051223)

  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: getInstance: impossible to get the instance of CSSSystem, please visit SharedServices_Security_Client.log for more information]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051198)

  Single Sign-On initialization failed!

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1056815)

  Essbase 64-bit - version 11.1.2 (ESB11.1.2.3.000B4412)

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051232)

  Using English_UnitedStates.Latin1@Binary as the locale Essbase

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051683)

  Try to recover the login information from the registry failed. Please check the reg.properties file, and then try again.

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051527)

  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.

  I am able to open the workspace's shared services, but see the following in the Sharedservices_securityclient log

  [2015 07-12 T 00: 26:41.418 - 07:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A6jgDwW05zzWByW1LcXQY000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] failed to initialize the instance security EMP of Shared Services. Component marchandises9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is set to null in the EMP system registry. Check the configuration of the EMP system registry.

  [2015 07-12 T 00: 28:51.332 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:51.403 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20002] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.EPMSystem] [SRC_METHOD: getInstance] instance of security during the initialization of the SSP using the EMP system registry. It is a status messages. No action required.

  [2015 07-12 T 00: 28:52.340 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.184 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.606 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20005] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] started asynchronous user directory cache building user native Directory directory. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 12] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0:3] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 1. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20331] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] building Cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20332] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] unify done cache and the object is set to the cached cache manager. It is a status messages. No action required.

  Any help is appreciated here.

  Thank you

  Dev

  The error being generated using relates to Essbase is not able to connect to the registry of SSP database, or the database is corrupt.

  Are a set of services to automatic, maybe that the database has not increased and running prior to Essbase trying to boot against the register of Shared Services.

  Confirm the relational database is finally up and running and you can connect, then clear the Essbase logs, start Essbase, and post again the same newspapers.

  See you soon

  John

• Not able to connect to the activation server

  Dear Sir

  I use CC for photographers for a year and a half now on two separate PC. A few weeks ago, my laptop (Windows 7 Home Premium SP1) begins to show signs that I had to connect to the activation server and was counting the days I had left to do this. A week ago I had yet just 8 days to do the activation. After doing all the required checks recommend Adobe and everything seemed in order, I have re-installed Lightroom, Photoshop and Bridge again on my PC.

  When installing CC stated that the installation has failed and that some features are not installed. I removed on my Windows Redistributable Microsoft C++ 20xx for Visual files and repeated this same procedure after each separate installation. After that restart the system CC told me that there is an update to the software, I just installed and then everything seems to be in order after having done update. I got no message more with countdowns and I was happy again until yesterday.

  My system was told that there is a new update for my Windows and after installing that was screwed up again. First I couldn't open Adobe Raw over the bridge. Secondly, I started Photoshop, and the message popped up that my activation for Photoshop was not made. When I tried again once, I got the message that I should connect to my internet and try again. My internet works fine, but somehow Adobe Photoshop can not connect to the internet and the activation server. This problem is not present with Lightroom. Before you reinstall all Lightroom also said that I had to turn on, but now that still work correctly until now.

  I deleted again in re-installed them 20xx C++ redistributable files. Same as I did with Photoshop, but my problem is not being solved. On my second PC everything still works well and as much as I know I'm not behind the payments. A week ago I received an email that my payment has been received.

  What can I make more efforts to solve this problem?

  
  Kind regards

  Pier Giorgio Tesser

  
  Account ID: deleted by the moderator >

  Contact adobe support so that they can guide you through these steps, Please contact customer service

• Not able to connect with the root via putty ssh account

  Hello

  I activated the lock mode and activated ssh as well.but I am still unable to log in using PuTTY says access denied. At the same time, I can able to connect to esxi console using the root account. Help, please.

  In the locked mode, you will only be able to connect through vCenter, not via SSH.

  See http://pubs.vmware.com/vsphere-51/topic/com.vmware.vsphere.security.doc/GUID-F8F105F7-CF93-46DF-9319-F8991839D265.html

• Not able to connect to the server via the AFN TCP

  Hi all

  After Googling carefully I finally decided to post my problem which is really sent me nightmares.

  In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

  I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

  In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

  When I try to connect via wifi network using the suite of string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

  I am able to connect to the server, but not in the case via the AFN.

  Please help me...

  I'm here just stuck and not finding a way out.

  Thank you

  Finally I found the solution to the problem...

  I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

  'socket://127.0.0.1:8089 '.

  No need to specify the APN, user name, and password.

  Here's the code used

                   ConnectionFactory connFact = new ConnectionFactory();
                    ConnectionDescriptor connDesc;
                    connDesc = connFact.getConnection("socket://127.0.0.1:8087");
  

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• Impossible to launch the store "we were not able to connect to the store.this could not have due server problem or the network connection has expired.

  Original title: PROBLEM WITH WINDOWS STORE

  Hi, I'm a first year student at IIT MADRAS. I just got a new laptop (W8, 4 GB RAM, 320 to drive HARD, I3). I had problems to open the store. He said: "we were not able to connect to the store.this could not have come because of problem with the server or the network connection timed out." My connection to the local network requires the proxy settings. PLEASE HELP ME.

  Hello

  Yes, the speed and connectivity of the internet must be consistent for the applications to work properly.

  I suggest you create a new user account and checkif the problem persists.

  Create a new user account.

  Setting up a new user account is a very easy process in Windows 8. There are two types of user accounts, a Microsoft user account and a Local user account. See this link for more information on the two types of user accounts and how to create them.

  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Try to connect with the user account that is having right of the administrator and check if the problem persists.

  I hope this helps. If you have any other questions, please get back to us and we would be happy to help you.

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  Hello
  I am not able to coonect to a server by using the code below.
  
  If I try the same code on the server to connect it self, it works well. But when I try to connect to another server gives the error below. And I use the IBM Jdk when getting this error. Y at - it a setting to avoid this error.
  
  Error:
  INFO: Add /usr/jdk/instances/jdk1.6.0/jre/lib/ext/sunpkcs11.jar to the CLASSPATH of the extension
  ConfigurationLoader
  November 30, 2010 16:33:12 < clinit > com.sshtools.j2ssh.transport.publickey.SshKeyPairFactory
  INFO: Loading public key algorithms
  Error so that SFTP
  java.util.NoSuchElementException
  at java.util.StringTokenizer.nextToken(StringTokenizer.java:332)
  at java.util.StringTokenizer.nextElement(StringTokenizer.java:390)
  to com.sshtools.j2ssh.transport.AbstractKnownHostsKeyVerification. < init >(Unknown Source)
  to com.sshtools.j2ssh.transport.ConsoleKnownHostsKeyVerification. < init >(Unknown Source)
  at com.sshtools.j2ssh.SshClient.connect (unknown Source)
  at fileTransfer.connectToServer(fileTransfer.java:18)
  at fileTransfer.main(fileTransfer.java:56)
  
  
  
  Code:
  public static boolean connectToServer (String serverIp, int serverPort, String userId, String password)
  {
  SFC SshClient = null;
  try {}
  System.out.println ("inside the Try to like his SFTP");
  ConfigurationLoader.initialize (false);
  System.out.println ("ConfigurationLoader");
  
  SFC = new SshClient();
  SFC. Connect (Ipserver, serverPort);
  System.out.println ("SFC. Connect");
  
  PasswordAuthenticationClient pwd = new PasswordAuthenticationClient();
  
  pwd.setUsername (userId);
  
  pwd.setPassword (password);
  
  int checkAuth = sfc.authenticate (pwd);
  System.out.println ("checkAuth" + checkAuth);
  
  If (checkAuth == 4) {}
  System.out.println ("AuthenticationProtocolState.Complete");
  
  SFTP SftpClient = sfc.openSftpClient ();
  sftp.Quit ();
  SFC. Disconnect();
  }
  on the other
  {
  throw new Exception ("invalid user name or password for the user");
  }
  }
  catch (System.Exception e)
  {
  System.out.println ("Error While SFTP");
  SFC. Disconnect();
  e.getStackTrace ();
  Returns false;
  }
  Returns true;
  }

  Swapped

  Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  @O.P.
  Don't, don't.
  In the future, to choose the most appropriate forum and make your post.
  Swap shall be the same as the rude spamming.
  I'm not aware of any web-site-of-value forum that would promote the permutation in its directions on the label.

  ... and for what is "Urgent"?
  This web site is for the end-user community gather and discuss various topics in general conversations. Your time constraints are irrelevant. If you need real support for something, then log a support case and pay for a quick response.

  See the FAQ in the link at the top of the page.

• Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

  Original title: Win32/Sirefef.DAtrojan

  Recently, I got the following virus. Win32/Sirefef.DAtrojan

  I was not able to connect to the internet since then.
  Y at - there someone who can help me with the connection to the internet?
  I have a Dell XPS600
  Microsoft XP Professional

  Hello

   
  1. what happens when you try to connect to the internet?
  2 - is confined to the browser Internet Explorer problem?
   
   
  I suggest you perform a full scan of the system.
  Here is a link that will give you know how
   
  Perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• not able to connect to the game of google on mobile data store

  I bought gold x 2 lenovo 32 GB vibe.

  in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

  Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

  and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

  Please give the solution.