Not able to create a system recovery disc

Similar Questions

• Create a system recovery disc?

  Hello

  My girlfriend just got a Probook new 6460 b (what she ordered to hp.com) with Win7 Pro and she wants to create a system for her recovery disk.  We have been able to make a 'system' repair disc, we found it under start > Maintenance, but I am sure that this is not a complete system recovery disk.  I found the following link: http://support.hp.com/us-en/document/c01895783 . But his computer does not appear to have installed the HP Recovery Manager.  She also received no recovery discs.

  How can we get the recovery disc for this computer?

  Thank you!

  None of the professional laptop computers come with a recovery CD set more

  Anyway, if you live in the United States or the Canada, here's how to get a set of restore for your PC disks:

  1. Enter the reference number and the serial no on the underside of the computer on the tag.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone.

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. I believe that you will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Alternatively, you should be able to Access Manager (dvds aren't needed) recovery with a F11 key at startup

  To do this, just restart it, to the hp bios screen, press f11 and select recovery

• I can create a system recovery disk that gets installed and updated Windows 7, not the preinstalled HP Vista recovery Partition?

  I have a laptop HP HDX 18 that had 64-bit Windows Vista installed, with a Vista recovery on his C drive Partition.  Since then, I installed clean 64-bit Windows 7 Professional of his Microsoft licensed DVD, that I still have.  I kept with all (200 +) of Windows updates.

  Now, I want to create a system (Flash drive) for this laptop recovery disk, but my concern is that he will lead the recovery in its Partition Vista original, installed at the factory.   If I use W7 administration tools installed to create a system recovery disc, it will recover the old Windows Vista or Windows 7?  In addition, it would be nice to have a system recovery disk that had the latest W7.

  I'm not looking to install the drive link below; However, I prefer the system recovery disk to restore my laptop to its W7 system most recently updated, rather than start over.

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  What choices do I have?  Where can I find the appropriate instructions?

  Thank you very much for your help!

  If you are the same person, you use 2 different profiles, not the same profile.

  Sunspirit and jhughey are 2 different profiles.

• How can I create system recovery disc for a new laptop with windows 7 Home Premium?

  I just bought my daughter a new Toshiba Satellite with Windows 7 Home Premium laptop last night. The laptop came with a Windows restore disk. How to create a set of boot from the DVD then when the system fails, or I need a new facility? I created a system repair disc and two-disc Image recovery. Is this enough to fully restore Windows 7 to the initial state of machines? (Technology at best buy assured me that it was nothing that I was able to do and that they would do for me for $70.00.)

  In short: my Dell came with a system recovery disk which was very convenient. I would like to reproduce this convenience with Windows 7. Any help appreciated.

  Jim

  You will need to follow the manufacturers directions to create the recovery media. Looks like you've done that, but Toshiba could only say with certainty. I recommend that you contact their customer service.
  Kerry Brown MS - MVP - Windows desktop experience

• How can I create on my Acer system recovery discs?

  I need to store window 7 onDVD (back-up for window 7) for a brand new with Windows 7 operating system already in computer

  
  

  I compurt any new branch (ACER expires), already having Windows 7 installed. They advised me 1st step is to have a back-up for window 7.

  I want to do it myself, I began to use the computer again.

  • Can you send me guide/steps to store my window7 on DVD?
  • How many DVDs I need, I have a box of 4.7 GB dvd, so 4-5 enogh?

  Thank you

  Rafid

  When you use the Acer software to make records of recovery, 4-5 should be enough.

  Acer - create recovery discs:

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  Your Acer computer includes an eRecovery Management software that allows you to perform operations of restore directly from your disk hard drive , which allows a faster recovery process and no need for discs. eRecovery Management does, however, allow to create recovery discs. The recovery disks will allow you to restore your computer something happened to your hard hard disk .

  Note: According to Acer computer you have your eRecovery Management version may be slightly different, but the ability to create your discs will be available.

  To create your recovery discs backup follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.

     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.

  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

  What makes a system image is another option, but it will usually more then 4-5 DVD.

  Create a System Image in Windows 7 before installing
   
  You can make an image of your installation of Windows 7 system and it allows to restore Windows 7 to its state when the image was made.
  1. click on the Start Menu and type "Save" then click on back up your files.
  2. then click on create a system image.
  3 select the location where to save the image of your system, and then click Next.
  4. check your discs to back up, and then click Next.
  5. verify the settings, and then click Start backup to start.
  6. once the backup is complete, it asks to create a system repair disc, click Yes.
  7. Insert a CD or a blank DVD on the hard drive, then click on create disc.
   
  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• System Disk Image recovery and system recovery discs discs

  These terms are very confusing.

  I had 3 HP computers to office over the past 15 years and have always comes to an ERD but my luck could escape and I'm going to need one of them.

  However, I'm confused.  I thought that as HP comes with a drive D: original Image, it would be enough.

  I make records of recovery or system disk Image?  Are they the same?  My HP Advisor on this computer again I do "system recovery discs!

  I would really like someone explain (in novice language) which mean the above and what I need to do?

  I appreciate so much people in the help forums, as I learned more from them than books I have.

  Twinkie3

  Twinkie3

  Hello Twinkie3, I suggest making the game to restore HP Recovery disks.  Even if you have the recovery restore D: hard disk partition, it may be damaged or if the hard drive fails and needs to be replaced, you would not be able to access the recovery partition.

  If you have to replace the hard drive, you can only insert disc 1 of the the recovery set and put the system back as it was when shipped. Without these records, you would need to try to acquire at HP for a cost to you, and after a while, they are not available.

  The set of recovery disks cannot be done once and only be used to restore your particular system.

  Normally, it takes 3 DVD discs but can take longer depending on the size of the restore partition.

  The HP advisor don't constantly remind important you to these disk since it's a step in maintaining your system over time.

• HP 15 laptop: create a system recovery

  I upgraded to 8.1 win10. Then a factory reset a few months later. Now, I have a message from HP to create a system recovery.

  Can what recovery option I use.

  I'm not computer savy.

  Any help must be as if I know nothing about this kind of thing and is greatly appreciated.

  Thank you

   

• Create a system repair disc?

  Hello:

  RE: HP Pavilion DV-7-4270us Windows 7 64-bit

  Recently, I replaced an internal hard drive on the pc that is referenced above. I have re-installed the drivers and software I want.

  My next step would be to create a System Image disc?

  (I created a restore of the system or the rescue disks while the computer is new, but it would not be installed on the new hard drive, so I'm cautious in doing that, once again, because it wasn't before).

  Thank you

  Hello:

  Yes, I use Windows 7 backup tool and do a system image and a system of disc repair, so you can access the system image.

  I recommend that you use a portable hard drive, and then you can boot from this CD to repair windows for you, select restore backup image option and have your portable hard drive connected when you are recovering.

  Windows will look for the image on your drive hard laptop usb and restore.

  You can keep the image for the new installation, that you just did, or you can keep up to date and create a new image whenever you want.

  Just know that Windows will overwrite any previous system image, you created on this portable hard drive for the PC.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• HP system recovery disc for the PC HP Pavilion?

  I press a dozen HP desktop systems.  In my software collection, I found a three-disc set of HP system recovery discs that were not labeled with a hint of the association of the system.

  The discs are marked by these numbers = 5012-0414, 5012-0415 and 5012-0416.

  It would be helpful if someone can tell me which PC HP Pavilion, these discs are designed so that I can either label or throw it out.

  Thank you very much for the time and effort to help me!

  Hello:

  According to this, they go to a HP Pavilion HP 8750 C.

  http://www.com-com.co.UK/basket_enquiry.ihtml?PN=4500078 ~ add = Y ~ cs = CL_availability_link

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Error code 0xc0aa0204 when creating a system repair disc

  I get an error when I tried to create the system repair disc. The error indicates that the media is upside down, (0XC0AA0204 error code). It is not upside down. How can I solve this problem?

  Hello

  With the publication of the description, I understand that you are getting an error code: 0XC0AA0204 while creating a system repair disk on your Windows 7 computer. I will certainly help you get this fixed number.

  Since the error itself says that there is a problem with the disc. While there might be a possibility of a few scratches on the disc, or it might not be readable by the optical drive.

  I suggest trying to use another drive or you can also try to use this same disc on any computer/computer to diagnose whether or not the problem is with the disc.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Failed to create the system repair disc receiving error code 0 x 80070057

  Original title: System repair

  When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

  No help available?

  Ray

  Hello Ray,

  Thank you for your response.

  I appreciate your time and your efforts.

  Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

  Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

  I hope this helps.

  Thank you

• HELP: Not able to add attachments - system crashes; only through "END TASK MANAGER" can I leave Mozilla

  I'm not able to add attachments - system freezes. only through "END TASK MANAGER" can I leave Mozilla edit

  jasher2000, later in the same day in Microsoft Outlook folders relate not... then, when everything has failed, I rebooted the system and so far today, no problem! PTL, thanks for your help!

• Satellite A60: SD-R6112 drive firmware is not able to detect most of the discs

  My Toshiba Satellite A60 was an engraver of DVD SD-R6112 with Firmware = 1530 is not able to detect most of the discs. I mean that it is not able to detect most of the records he used to read or run however it works the CD provided with laptops for example installation and tools and Utilities CD.

  Recently, I updated win xp to SP2 and I think that this problem is arised for this reason (but not sure)... I tried to reinstall the driver and also tried the latest firmware upgrade, but it is said that it does not require.

  Everyone can you please suggest me the solution. I really tried all but it does not work.

  Hello

  The fact is that each player doesn t work with all THE CDs or DVDs.
  Sometimes, the most recent firmware update could solve these problems, but you will not get a 100% guarantee that it will work.
  I have tested many media and now I decided to use the TDKs CD and DVD.
  I m happy because now I have problems with this media.

  The only solution is to test the media.