Not able to install Action PS of the oil painting in Photoshop CC 2015 64-bit

I just bought the oil paint PS Action modules and I am not able to install it in Photoshop.

I use Windows and I have the latest version of Photoshop CC 2015 64-bit

When I try to install Action PS to paint in oil with Adobe Extension Manager, I got an error message.

Can you help me please!

I suspect that your problem is that the installer of the action is not compatible with Photoshop CC2015. Modern versions of Photoshop do not use the old Extension Manager and so if the developer has not updated their actions, you will not be able to use them. I tried to find your action but it seems around a bit, but it seemed likely

Action of oil painting | GraphicRiver

If you look at the bottom of the page it says this isn't CC2014, 2015 compatible.

Tags: Photoshop

Similar Questions

  • Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

    Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

    Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

    Hello

     
    You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
    Put your boot system helps determine if third-party applications or startup items are causing the problem.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
    If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
    Reference:
     
     
     
     
  • I can't access the oil painting in Ps CC 2015 filters

    I followed a tutorial in Photoshop BDM: a comprehensive Guide and a step necessary I went to filters/STYLES/oil paint.  When I followed the steps the oil painting was there, but I couldn't use it.  The police were grey rather than black "BOLD" as the other filters.  Do I have to download this filter and if so, where to go?  Thanks for your help.

    You must have a graphics card supporting OpenCL and CC 2015.1.2. If this isn't the case, update the driver software of your card or in the case of double cards, see that Photoshop uses the high-performance card.

    Go to Photoshop and running the GPU preferences, click Advanced, and check on OpenCL.

  • Not able to install Management Agent on the server no - WHO, different platform

    Hello

    I run 12.2 of the WHO on a Linux platform and must make a 64-bit Windows Server a target managed by getting the installed Management Agent.

    The Agent software for the server to Win 64-bit platform has been downloaded using the console auto update. However, I can't add the target host because it maintains have reported that I have selected a platform for which software Management Agent is not available on the WHO and I want to use the update auto etc.

    So, after that I downloaded the agent software for Windows 64-bit at WHO, using the self updated fucntion, in the list of the software updates Agent, I see:
    Downloaded  |  Microsoft Windows x64 (64-bit)  |  12.1.0.2.0  | Oracle  |  Agent Software ...
    and when has highlighted in the past, activities list it shows shares"available"and then "Download", both with the status of successful operation.

    So now, I'm going to: Setup - Add Target - add targets - manually add hosts
    I add an entry, fill in the IP address and choice of platform (win 64-bit), but the platform name is added with * "Unavailable software Agent" * then recommend me again to download the software for this platform using auto update !

    Just in case, I made a new connection in the OEM but which did not help.

    Can anyone suggest me please an action plan to "fix" it?

    Thank you very much!
    Ed

    Hello

    After downloading the software agent, do you have one apply?

    If not, then pls do more...

    Setup > extensibility > auto update > click agents

    in "actions" drop-down menu, select apply.

    You can always check the software available in your OMS agent using emcli.
    Use this command to get the list of the avlble

    emcli get_supported_platforms

  • Not able to install kies 3 get "the procedure entry point? _xmem@Tri@STD@@YAXXZ could not be located in the dynamic link library msvcp90.dll.

    Original title: ? _xmem@tri@std@@yaxxz error

    I'm running kies 3 so I can move video from my phone to my computer, I downloaded the program and I get this error message... [THE PROCEDURE ENTRY POINT? _XMEM@TRI@STD@@YAXXZ WAS NOT FOUND IN THE DYNAMIC LINK LIBRARY MSVCP90.] DLL.] I have installed and uninstalled this program a few times now and keep the same error, I also ran Guest [sfc/scannow] and there was no breach of integrity don't know what else to do, I'm running vista 64 premium.

    This fix by installing the following:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=5582

  • Not able to install firefox updates

    I downloaded the new firefox updates, but not able to install. I followed the steps.
    1. check if no instance of firefox is running in the Task Manager
    2 lunch Firefox as administrator.
    3. click on Yes
    4. it begins to install.
    5 throws an error as several instance of firefox running.
    6. tried this couple of times, but of no use. Every time error.
    7. no created dumps.

    Do a clean install (re)-:

    • Download a new copy of Firefox and save the file to the desktop.
    • http://www.Mozilla.com/Firefox/all.html
    • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
    • Do not erase personal data if you uninstall the current version.
    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    You don't need to create a new profile, which is not necessary for this issue

    Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • Satellite C660 - not able to install the driver for chipset WXP

    Come on!

    I installed WIN XP on my Toshiba Satellite C660 laptop and downloaded the drivers for windows XP, but I'm not able to install the chipset and display drivers.

    It says "this computer does not meet the minimum requirment for the installation of this software.
    Setup will now close '.

    Can you help me, please?

    Hello

    What C660 (C660-xxx) do you have?
    Have you installed Windows XP Home Integrated SP2 or SP3?

  • Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

    Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

    aarruunn, you might want to try Windows Installer Cleanup utility.

    http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

  • I'm not able to install the Adobe programs in my HP Pavilion dv6 W7 HP

    Hi all.

    I'm not able to install the Adobe, such as Photoshop or Illustrator programs, in my HP Pavilion dv6 W7 HP.

    I installed these same programs on another computer, but on my HP accused the following error:

    "The installation failed.
    Inconsistency in the database of the installer. "

    I tried to install an older version of one of them, to test, and also an error has occurred. The following: Exit Code: 15

    What is going on? And how can I solve this problem?

    Thank you.

    Did you remove all the other Adobe programs of the laptop that you don't use.

    TRY THIS

    Delete the "adobe" folder in C: drive

    For example, Program files "adobe".

    and install again

    Let me know the results

    In addition, THX for the GLORY

  • not able to install the driver mx NIDAQ (for the use of USB-6008) in my laptop, NIDAQ902f0? any solution...

    I am not able to install driver of mx NIDAQ (for the use of USB-6008) in my laptop,... well NIDAQ902f0 want to give any suggestion...

    Following message comes when I run the Setup... (installation program downloaded from the website OR..)

    Runtime error:

    This application has requested to terminate in an unusual way.

    Please contact the application support is more information.

    Title of the dialog box is "Microsoft Visual C++ runtime library"

    Is the same when NIDAQmx 7.5 is tried to install from the CD that came with the USB-6008.

    Double post

  • Not able to install Windows XP media center 2005, het a message to install the Update Rollup 2.

    Original title: how to install the Update Rollup 2

    I recently bought a kindle fire hd but when I connect it to my computer with the usb connection, it shows not only a connected device on my computer.amazon tried to install windows xp media center edition 2005 (kb900325) .but it would not install it came a message saying I need to install cumulative update 2 first.î tried, but does not Please help

    Hi James,

    Welcome to Microsoft Community where you can find all the answers related to Windows.

    According to the description, it looks that you are not able to install Windows XP Media Center.

    I have a couple of steps that should help you to solve this problem.

    Follow these 4 steps to install the KB925766 correctly:

    a. if the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

    To determine whether the 886904 update is installed, follow these steps:

    i. click on start, run, type appwiz.cpl, and then click OK.

    II. Click to select the show updates check box.
    III. in the list currently installed programs, locate the following item:

    Fix for Microsoft .NET Framework 1.1 (KB886904)

    If you see this option, you must remove the hotfix. To remove the patch, click on the Microsoft .NET Framework 1.1 (KB886904) Hotfix and then click on remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

    b. to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed. Windows Update detects whether these packages are installed. Windows Update automatically installs these packages for you.

    (i) follow the link below to download the .net framework 1.1 manually:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

    (ii) follow the link below to download the .net framework 1.1 SP1 manually:
    http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en

    c. cumulative update 2 for the Windows XP Edition Media Center 2005 (KB900325)
    Follow the link below to download and install the KB900325:
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e5daf37e-E243-4410-BC51-81cf2b56fe6e

    d.October 2006 Update Rollup for Windows XP Media Center Edition 2005 (KB925766)
    Follow the link below to download and install the KB925766:
    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=8a2e5868-c2b9-4131-b08e-afc7cb0a6576

    Now try to install this update and let us know if it solved the problem.

    For additional help, refer to the article below:
    http://support.Microsoft.com/kb/925766

    I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

  • Not able to install Windows mobile device Center 6.1 in the context of the system

    Hi all

    We are not able to install Windows Mobile device Center 6.1 in the context of the system. We have only 2 options to install any application via SCCM. (1) user, 2) system context. In the context of the user, we will not be able to install the application and system installation of context is a failure. Exe installs fine when we run as admin, but we do not have admin context option in SCCM 2012. Please confirm that we have any other new exe or we can not install in the system context.

    Kind regards

    Ashok

    To help you install Windows Mobile Device Center on Windows 7, see the Jason-H position of this link.

    Let us know how it goes.

    Thank you.

  • Not able to install the application, asking family SMEs of installation

    Original title: iam not able to install the app it ask family SMEs of installation

    IAM able to install apps it ask some family configuration

    Hello

    Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

    I would like to know;

    1. What you are trying to install applications?
    2. You are the administrator of your computer?

    You can set up a family safety account or you may be referred by the primary user. For the children of family security controlled, if game Restrictions are lit, depending on the setting you have (lower than 10, teen, mature etc), your child will be able to download applications that meet the coast.

    Here's what I suggest, if you wish to:

    1. Go to https://familysafety.microsoft.com and login as parent
    2. Check the setting of the game.

    You can do two things

    • Put out of the game restrictions or
    • Change the restriction of adult game

    Once your child has downloaded the application, parent go back to the family site, turn on the Restriction of game or set the game side to one appropriate for your child.

    For more information:

    Use security for the family with the Windows store

    Also, in the list of game for your childs account, make sure that the app is in the whitelist if your username already has but gets blocked by parental control due to permissions issue.

    Let us know if you need more assistance. We will be happy to help you.

    ________________

    Thank you best regards &,.

    Isha Soni

  • not able to install software or an application using the windows store using the answers provided for windows 8

    Hello

    I tried all the answers regarding the resolution offered to other users who were not able to install the application or software windows store 8. But still I'm not able to install and error message is received:

    "Your purchase cannot be completed, something happened and your purchase could not be completed. "Error Msg: 0 x 80070422 '.

    Please help solve the problem for me.

    Thank you & best regards

    Gagan

    Hello

    Thank you for the update.

    Given that the problem persists, I recommend to perform a refresh of the system and check if it helps.

    How to restore, refresh or reset your PC: http://windows.microsoft.com/en-US/windows-8/restore-refresh-reset-pc


    Note
    : the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

    Keep us updated on the status of the issue.

  • I already buy Adobe Acrobat Pro for mac on September 17, 2012; But due to the formatting of my mac, I'm not able to install

    I already buy Adobe Acrobat Pro for mac on September 17, 2012; But due to the formatting of my mac, I'm not able to install

    Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Maybe you are looking for