Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

Similar Questions

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• Windows Vista: updates are not configured correctly, returning from changes

  my computer may not be updated, whenever I turn on or restart my computer, the message "Configuring updates stage 3 of 3 0% Please wait, don't turn off your computer" comes but after awhile, it says 'updates are not configured correctly, returning from changes' it keeps past, I did everything I could , but nothing happened. What should I do?

  So far there are problems or there are many who have this problem?

  Have you tried to disable temporarily running anti-virus software?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/#appliesTo

  Troubleshooting in Win 7 vs KB971058 for Vista
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/e1f0a807-E132-4FDC-ABF8-5bad87b64204

  The system update tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• received update for net framework 3.5service pack 1 and net framework 3.5 family update [kb951847] x 86 for about 2 months. my computer keeps trying to install it. He returned saying updates were not configured correctly. returning from changes.

  updates will not be installed on the computer

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the correct help it.

  See you soon.

  Mick Murphy - Microsoft partner

• When people ask me to update creative cloud and click on 'Install now', I get the message "trying to connect to server...". "but nothing happens. (Windows 7)

  When people ask me to update creative cloud and click on 'Install now', I get the message "trying to connect to server...". "but nothing happens. (Windows 7)

  Hello Hans,.

  You can uninstall Creative Cloud Desktop app and then reinstall it using the link: Download Adobe Creative Cloud apps | CC free trial Adobe .

  Let us know if it works or not.

  Thank you

  Yann Arora

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• Trouble installing iTunes. Get the message "unable to locate network % APPDATA%/. ».

  I am trying to install the latest version of iTunes, but I get the message "Unable to locate % APPDATA%/ network.". I made sure the previous iTunes was uninstalled properly and I found a suggestion on another forum that said "click Start-Run, type regedit (without the quotes) navigate to this registry path:
  HKEY_CURRENT_USER--> Software--> Microsoft--> Windows--> the current Version--> Explorer--> user Shell folders
  Delete the key: recent (right mouse click on the folder/keys, click on delete) close the registry editor and restart the computer. »

  None worked and I have really no idea what to do. I'm not good with computers at all, then I'd be really grateful for the help.

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• When I download and try to install Thunderbird, I get the message "your Thunderbird profile cannot be loaded, it may be missing or inaccessible.

  Due to a virus, I redownloaded 24.4.0 Thunderbird and it completed than in trying to open Thunderbird when I get the message "cannot load your Thunderbird profile. It may be missing or inaccessible. "I know that the profile exists in a folder"recovered files ". I tried to move to the current folder in Thunderbird, but get the same message. I tried to follow a Mozillazine article, but it's too complicated. Is there assistance online, such as chat or by phone?

  # It is not necessary to move the e00qmtzd.default.old for now.

  You can leave it in place and restore the C:\Restore file e00qmtzd.default.

• I have Photoshop CS5 and I get messages that there are updates available, but when I go to download and install them I get the message "there was an error downloading this update. Quit and try again later. "What can I do to fix this?

  I have Photoshop CS4 and do pass messages that updates are available, but when I go to install I get the following message:

  "There was an error downloading this update, please try again later." I tried several times without success.  What I'm * wrong?

  Remove all content following the location on your computer and try to update again.

  Win 7 and higher: : \Users\AppData\Local\Adobe\AAMUpdater\1.0\

  Mac OS (Library of the user): ~/Library/Application Support/Adobe/AAMUpdater/1.0/

  Please see:

  Access the hidden user library files. Mac OS 10.7 and later versions

  Let me know if it works for you.

  Kind regards

  Ashutosh

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• updated configuration failure Vista - updates not configured correctly. returning from the changes - code Error 80070020

  Updates installation but to the message indicating a configuration step 2 bed 'updates not configured correctly. reverting changes"error code is 80070020.

  http://support.Microsoft.com/kb/883825>

  08/10 / 1106:12:26

• When I try to install photoshop I get the message that the installation program detects a pending restart and I need to restart. So I restarted and I get this message

  Please help me to install adobe photoshop 14. I get the above message.

  You will have the option to skip. Just ignore it and continue with the installation.

  Kind regards

  Hervé Khare

• When you try to install iTunes, I get the message "a program for this facility is unavailable.

  big trouble in train to install iTunes, telling me that something is missing, but not what!

  Hi SimonHunt,

  I suggest you to return the item and check if it helps.

   

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/ht1926

  Hope this information helps.

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

• Problems of the sp1 update to sp3. While trying to install sp1a, I get a message "the server is not responding.

  IM currently under xp pro sp1. I want to upgrade to sp3, and I read that before the update to sp3, you have sp1a or sp2 (obviously not available). while trying to install sp1a, I get a message "server not responding" and then he directs me to go to the microsoft site to download a version of the file that does not use my internet connection. I can't find this file anywhere. My question is #1 I'm even doing this right? and anyway to update without having to download sp1a first?  IM this operating system running on an ibm thinkpad. I know its outdated and will be a bit slow though, my reason to update to sp3 should be more compatible with the newer programs that won't let me download with sp1. Thanks for any help in advance.

  See my response to this thread--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/windows-xp-service-pack-1a-server-not-contactable/72a91455-7814-4d05-817c-52a4fbff0d8d

  There is a much more important reason to install sp3 ' to be more compatible with the newer programs.  If you have been online since August 2004 with Windows XP service pack 1 or more (when sp2 is released), the chances are high that your system is compromised (one of the reasons why he is "a bit slow").

  You might seriously consider a "clean install" of Windows with whatever you have and then recovery media immediately this update to sp3.  If you do this AND your recovery mechanism restores Norton or McAfee trial ware, after you make initial/reinstall recovery and before you install sp3, follow the advice of MS MVP PA Bear below:

  VERY IMPORTANT! => Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You need TO uninstall the trial for free AND download/run the appropriate removal BEFORE tool to install updates, the Windows Service Packs, or updates of IE AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe