Not able to open the email to Self care

Similar Questions

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I'm not able to open the file (photo) to a specific folder in Windows 7

  I'm not able to open the file (photo) for a particular folder in Windows 7, get the error 'Photo Viewer Windows can not open this photo because you don't have permission to access the location of the file'

  I'm not able to open the file (photo) for a particular folder in Windows 7, get the error 'Photo Viewer Windows can not open this photo because you don't have permission to access the location of the file'

  =============================================
  Maybe I saved the info on the net will be useful:

  =====
  Windows 7 - appropriating a file or a folder
  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Posted in Forum MS responses by: Ski1382

  This solved the problem for me too, you can select the top of the file (in
  my case g:\ my documents-my pictures.)

  Properties-> Security-> advanced-> change permissions

  Check "include permissions inheritable" AND "replace all permissions of the child".

  Work done :)

  And... the following answers Forum thread can be interesting to read:

  Photo Gallery can't open this photo because you
  do not have permission to the location of the file asscess
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Photo-Gallery-cant-open-this-picture-because-you/bc4c3f20-6c55-4c63-a73e-d856d493d9a0?page=1&TM=1327456739375

  More information:

  Maybe this article would provide a few ideas:

  Windows 7 - How to take ownership & Grant
  Permissions to access files & folder in Windows 7
  http://www.Blogsdna.com/2159/how-to-take-ownership-grant-permissions-to-access-files-folder-in-Windows-7.htm

• Not able to open the workspace in my laptop

  Hi all

  I'm not able to open the url for the workspace after having upgraded to 11.1.2.2.500 in my laptop and I could open the url of shared services in the same laptop

  and I was able to open the url in the server boxes

  In the same laptop, I was able to open my workspace of production which is in 11.1.2.2.309

  Why is happening. I need to update the security settings for ie9

  Kind regards

  VT

  Have you tried to empty cache browsing and then try to access?

  SP

• DNG Converter is not able to open the cr2 (greyed icons) files.

  DNG Converter not able to open the cr2 (greyed icons) files if they are on the disc or the office. With the help of Mac El Capitan, CC, Canon 6 d. Used to work on the earlier Mac OS. Similarly, the "get photos from camera" button in cc Bridge does not detect any photos or devices. What needs to be put in place for the DNG Converter recognise once again my cr2 files?

  It's apparently a problem with El Capitan. See this thread:

  Photo Downloader Adobe Bridge recognizing only no camera after upgrading to El captain in Mac

  Copy of the correct answer: ' discovered Adobe Bridge CC with Mac OS 10.11 (El Capitan) does not work with many USB devices to import images (including iPhone). " Apple said: "the USB stack is completely redesigned to improve stability and performance compared to Mac OS 10.10. Applications and third-party drivers for vendor-specific USB devices may require modification. "This is something APPLE has changed, that I hope that Adobe can answer, because now there is no real solution. »

• Not able to open the modal Page by a link attribute of report

  Dear all,

  Not able to open the Page modal by an attribute of report link, kindly help me...

  I use skills builders modal plugin page...

  Thank you and best regards,

  Madonna

  Here's what you have to do.

  You set up your link column as follows:

  Text link: what you want

  Link attributes: onclick = "return false;" class = "open_modal".

  Target: Page in the present application

  : The page number to open in your modal window

  You configure your dynamic action like this:

  Event: click on

  Selection type: jQuery selector

  jQuery selector: .open_modal

  (Notice the period at the beginning!)

  Action: SkillBuilders Page modal [plugin] (2.0.0)

  Scope of the event: Dynamics

  And finally, in your real Action (SkillBuilders modal Page (2.0.0)), location of the URL must be defined as an attribute of the element triggering.

  And that's about all it takes.

  I hope this helps.

• could not able to open the repository in online mode after changing

  Hi friends,
  
  Currently, I open a file of RPD called SH in online mode... Since Inorder for it to open, I made the following changes in the configuration file of TNA , and also in instanceconfig.xml file...
  
  Shortly after this change after giving a user name and password of the RPD SH file I opened the repository of the HS in online mode...
  
  And also if I give the username and the password of RPD HS in presentation services I can able to connect to the BI responses to view reports of SH...
  
  Now I have to open another file such as APP.rpd RPD, before I edited in the configuration file of TNA as well as in the instanceconfig.xml file...
  
  After that, change if I give the respective user name and the password of the average APP RPD file, it is not to open the repository in online mode...
  
  He throws the error as
  
  nqserror: 37001 couldnot connect to the instance of oracle BI server
  nqserror: 43001 authentication failed for Star repository administrator: username/password invalid
  
  Since the error trying to tell that the user name and password is incorrect for the file APP.rpd...
  
  But if I tried to open the APP.rpd file in offline mode means, is opened giving the username and password of it... But in online mode, why he does not accept the same user name and password...
  
  Because the APP.rpd does not open in online mode, I could not able to open the presentation...
  
  How do I open the APP.rpd instead of SH
  
  What may be the problem...
  
  Help me friends,
  
  GTA...

  Hi, GTA,

  Did you reboot of Oracle BI Server?

  Thank you.

  Daan Bakboord
  http://obibb.WordPress.com

• Not able to open the pdf in Acrobat Mac that I created in Acrobat Mac & used to be able to open

  Hello:

  I have Mac Acrobat 11.0.6.

  Like others who have posted, I'm not able to open a PDF file in Acrobat that I created with Mac Acrobat, as attachments sent and used to be able to open.

  Is there a utility to fix or repair?

  I get the message "Acrobat cannot open '___.pdf' because it is not a supported file type or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded)."

  Thank you!

  PS Look back, I asked once before, but without the information that I had created them as PDF files.  The problem was not resolved.

  The text editor suggests that what you have is completely corrupt. Usually if these PDF files sent by e-mail without binary coding, you have lost the PDF document on the end of the RRs and will not be able to recover. You should still be able to use the original file that you created, unless you deleted it. In this case, you will need to return to the original of the document and create a new PDF. It remains unclear how the PDF you are using has been managed since the creation, but it seems that the incorrect coding has been used or another error in a process of e-mail and the file was lost.

• Not able to open the page in R12

  Hi all
  
  I developed a page in 9i jdevoloper, I registerd page in oracle applications.
  It works very well in 11i instance. But I'm not able to run the instance of R12 page.
  This is to show the error when I open the page in oracle below applications.
  
  oracle.apps.fnd.framework.OAException: could not load application module 'wnsgs.oracle.apps.sysadmin.employeeadvancerequest.server.EmployeeAdvanceRequestAM '.
  at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:279)
  at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1300)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
  in OA. jspService(_OA.java:212)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
  in com.evermind.server.http.ServletRequestDispatcher.access$ 100 (ServletRequestDispatcher.java:51)
  to com.evermind.server.http.ServletRequestDispatcher$ 2.oc4jRun(ServletRequestDispatcher.java:193)
  at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
  at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
  at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
  to the RFjspService(_RF.java:225)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
  at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
  at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:619)
  # # 0 in detail
  Houston-30003: AppPool (wimuat1.wind.wnsgroup.netTESTFIN1529wnsgs.oracle.apps.sysadmin.employeeadvancerequest.server.EmployeeAdvanceRequestAM) failed at the checkout a module of application because of the following exception:
  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.JboException, msg = Houston-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg = Houston-25002: type wnsgs.oracle.apps.sysadmin.employeeadvancerequest.server.EmployeeAdvanceRequestAM ApplicationModule definition not found
  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
  at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
  at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:233)
  at oracle.apps.fnd.framework.webui.OAHttpSessionCookieImpl.useApplicationModule(OAHttpSessionCookieImpl.java:511)
  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
  at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:208)
  at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1300)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
  in OA. jspService(_OA.java:212)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
  in com.evermind.server.http.ServletRequestDispatcher.access$ 100 (ServletRequestDispatcher.java:51)
  to com.evermind.server.http.ServletRequestDispatcher$ 2.oc4jRun(ServletRequestDispatcher.java:193)
  at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
  at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
  at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
  to the RFjspService(_RF.java:225)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
  at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
  at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:619)
  
  
  Can someone help me on this issue... It is urgent
  
  Thank you
  NGO
  
  Published by: NGO on May 8, 2012 14:17

  Clear the cache in the responsibility of the functional administrator and not the bounce apache to apply the changes

• Not able to add the email account

  Hello

  To configure my hotmail account from POP to IMAP on my MacBook Pro, it was told by the community of Microsoft that I had to remove/delete the account, and then add it again. I did and the innbox disappeared, but when I tried to add the account again, I get the message that the account already exists. I get this message, even if the account is not on the list of available accounts. I hope you can help me to sort this out for me. (FYI: the microsoft community told me I could try to put @outlook.mac at the end of the address instead of @hotmail.com and this has me a bit more, but he said the account already exists in the next step.)

  Sincerely,

  Benedikte

  1. Please make sure that you don't have two accounts with the same email address. What happens if one of them is an iCloud account.

  2. If you use iCloud Keychain, open the iCloud pane in system preferences and uncheck the keychain. You will be prompted to delete the keychain local iCloud. Confirm - the data will remain on the servers. Then re-check the box. Follow one of the procedures described in this article to support to implement the iCloud Keychain on an additional device. Test.

  If you can't disable iCloud Keychain because the box itself check again, disable it on all your other devices first, and then try again. Before you do, make sure that you can use at least one of the methods given in the related support above, article under the heading "how to configure iCloud Keychain on a new device without another device to approve of?

  3. in the menu bar of Mail, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Why am I NOT able to open the WERb4ba.dir00 directory?

  If the syntax is too long, what is the correct syntax. Thanks in advance for your attention and your response.

  If you study the occurrence of the blue screen (BSOD), then I'd take a peek at these general guidelines, that I send to people who know the Blue Screen of Death (BSOD).  Help it get the facts you need to solve the problem.

  You need good information to troubleshoot a BSOD and watch what you told Windows XP is generally not very useful unless you want to do a lot of work.  I don't want to do a lot of work to understand a BSOD - I want to understand it now!

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Armed with this information, you may be able to focus on the cause of your BSOD - if you can't understand it and need some help, post the information requested back here in your next reply:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  Your system seems to start OK and then crash or didn't he start not at all?

  If your system works fine, what do you think might have changed since the last time it worked correctly?

  Can you make the system crash when you want
  ?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

  Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

  ==================================================
  Dump file: Mini102911 - 02.dmp
  Crash time: 2011-10-29 04:54:36
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 22f43
  Stack address 1: i8042prt.sys + 27fb
  Stack address 2: i8042prt.sys + 2033
  Battery 3 address: ntoskrnl.exe + 6e715
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 2600
  Size of the dump file: 94 208
  ==================================================

  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

• Not able to open the .wmv file sent as an attachment to e-mail

  the opening of emails...

  When I try to open some emails... I get a message telling me that it cannot be opened until I put an association in the control panel... My question is who should I click to find the association set...

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I can receive messages. If a joke comes to me and I have to open wmv then the message is in place. This file does not have an association, and I need to put the association in the control panel............... I can not find...

  ====================================
  I suspect the best bet would be to save the attachment
  in a folder on your hard drive by car and see it from there.

  However, the following steps can be worth a try:

  Reach... Start / Control Panel / folder Options / File Types tab...

  Scroll to WMV... left click to highlight...

  Look on the main panel just underneath and you will see
  "The details for WMV" and it will display the default association.
  "Open with XXXXXX."

  On the left, click on the button 'restore '...

  Now you should see:

  Details for WMV / open with Windows Media Player

  Close...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Not able to open the camera into my laptop which is configured with windows 8. Please help me solve this problem.

  I have HP laptop & upgrade windows 7 to windows 8, here I am able to see the camera, if I click it will open and display connect them a camera too in the background I see 3 tools with off mode. How can I open my webcam? You can help it. Not able

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Recover tablespace does not and not able to open the database

  Hi all
  
  I use Oracle RAC 11 g R2 in Linux. My database is running in mode NOARHIVELOG.
  I'm testing some RMAN scripts.
  
  After having made a scenario below: I think that the problem I used the switch log file!
  

  RMAN> backup tablespace 'USERS' TAG 'TestBkp_FRA';
  
  RMAN> backup backupset 10 format '/testasm/backup%U' delete input; -- here 10 is the backup set generated in the previous command
  RMAN> BACKUP INCREMENTAL LEVEL 1 tablespace users;
  
  
  alter system switch logfile;-- many times 

  I'm not able to recover my tablespace users due to the below:
  

  archived log for thread 1 with sequence 19 is already on disk as file +DATA/orcl/onlinelog/group_1.261.772044543
  archived log for thread 1 with sequence 20 is already on disk as file +DATA/orcl/onlinelog/group_2.262.772044547
  archived log for thread 2 with sequence 4 is already on disk as file +DATA/orcl/onlinelog/group_4.266.772044919
  RMAN-08187: WARNING: media recovery until SCN 1101381 complete
  Finished recover at 27-MAR-2012 17:21:36

  and I can't open my database:
  

  RMAN> alter database open;              
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of alter db command at 03/27/2012 17:26:18
  ORA-01113: file 4 needs media recovery
  ORA-01110: data file 4: '+DATA/orcl/datafile/users.259.772044111'

  Here is a list of my backups

  RMAN> list backup;
  
  
  List of Backup Sets
  ===================
  
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time     
  ------- ---- -- ---------- ----------- ------------ --------------------
  9       Full    1.45M      DISK        00:00:02     27-MAR-2012 12:06:47
          BP Key: 11   Status: AVAILABLE  Compressed: NO  Tag: TESTBKP
          Piece Name: /testasm/backup0an6tvil_1_2
    List of Datafiles in backup set 9
    File LV Type Ckp SCN    Ckp Time             Name
    ---- -- ---- ---------- -------------------- ----
    4       Full 1092418    27-MAR-2012 11:40:06 +DATA/orcl/datafile/users.259.772044111
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time     
  ------- ---- -- ---------- ----------- ------------ --------------------
  10      Full    1.45M      DISK        00:00:04     27-MAR-2012 15:58:54
          BP Key: 13   Status: AVAILABLE  Compressed: NO  Tag: TESTBKP_FRA
          Piece Name: /testasm/backup0bn6ud5q_1_2
    List of Datafiles in backup set 10
    File LV Type Ckp SCN    Ckp Time             Name
    ---- -- ---- ---------- -------------------- ----
    4       Full 1100603    27-MAR-2012 15:53:40 +DATA/orcl/datafile/users.259.772044111
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time     
  ------- ---- -- ---------- ----------- ------------ --------------------
  11      Incr 0  1.45M      DISK        00:00:05     27-MAR-2012 16:16:59
          BP Key: 14   Status: AVAILABLE  Compressed: NO  Tag: TAG20120327T161652
          Piece Name: +FRA/orcl/backupset/2012_03_27/nnndn0_tag20120327t161652_0.261.779041015
    List of Datafiles in backup set 11
    File LV Type Ckp SCN    Ckp Time             Name
    ---- -- ---- ---------- -------------------- ----
    4    0  Incr 1101381    27-MAR-2012 16:13:11 +DATA/orcl/datafile/users.259.772044111
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time     
  ------- ---- -- ---------- ----------- ------------ --------------------
  12      Full    1.45M      DISK        00:00:02     27-MAR-2012 17:00:26
          BP Key: 15   Status: AVAILABLE  Compressed: NO  Tag: TAG20120327T170023
          Piece Name: +FRA/orcl/backupset/2012_03_27/nnndf0_tag20120327t170023_0.260.779043625
    List of Datafiles in backup set 12
    File LV Type Ckp SCN    Ckp Time             Name
    ---- -- ---- ---------- -------------------- ----
    4       Full 1101381    27-MAR-2012 16:13:11 +DATA/orcl/datafile/users.259.772044111

  My database is running in mode NOARCHIVELOG have no full database backup.
  
  How can I start my database. Help, please!

  You can proceed as below.

  SQL > alter database datafile ' C:\APP\SHIVANANDA. RAO\ORADATA\TEST\USERS01. DBF' offline drop;

  Database altered.

  SQL > alter database open;

  Database altered.

  Off line file data from the USERS table space, and then open the database. Still, if there is a test database, then only do. Other wise, as mentioned, CKPT contace Oracle Support

• Not able to open the Mail Contetn (.msg) in the UCM11g!

  Hello
  
  I checked in a mail message electronic outlook server content UCM11g oracle as a content, but not be able to access this file. I installed the 'Email metadata' component in the server of the University Complutense of MADRID, access still not able Outlook mail messages. If I click on this message it is coming in an unreadable format. Please tell me what I have to install any component or any system requirements?
  
  Thank you

  Hi Prabhu,

  1 created the folder of "directory" under "D:\Oracle\Middleware\user_projects\domains\ucm_domain\config".

  Instructions were not not to create the directory in the pathname specified but to go to this directory and create mimemappings.properties. So, pass the file to the... \Config directory and it will eventually work.

  Kind regards
  Boris