not able to run micro security essentials says need to reinstall the client security micro

Similar Questions

• I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications.

  Hello

  I have a lot of problem with the installation of some software in Windows 7. I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications. Anyone have an idea what is wrong? Thank you very much.

  Original title: installation problem

  Hello

  Please keep us updated on the status of the issue.

  I suggest you try the following steps and check if it helps.

  a. you restart, and then press F8 after the bios screen comes up to bring up the windows boot options menu.

  b. Select "safe mode with command prompt" and press ENTER.

  (c) in the command prompt, type del c:\windows\system32\msiexec.exe and press ENTER.

  d. restart the computer and make sure that the Windows Installer service is set to automatic and started.

  e. try to install the Microsoft security essentials again.

  See also:
  I can't install Microsoft Security Essentials
  http://Windows.Microsoft.com/en-us/Windows/i-cant-install-Microsoft-Security-Essentials

  If you have any question, please ask your question on the forum virus and malware.

  Forums of viruses and malware
  http://answers.Microsoft.com/en-us/protect/Forum/MSE?tab=threads

  Because AUTOCAD, please ask question about Autodesk community.

  Autodesk community
  http://www.Autodesk.com/community

  I hope this helps.

  Thank you

• I'm not able to run a Windows Azure application

  I have a very strange problem.

  I'm not able to run an application in windows azure has a WCF service and mschart inside. Here are the steps to reproduce the error:

  (1) create a new windowsazureapplication with an empty asp.net webrole
  (2) now to add a new WCfService
  (3) run to make sure it works ok

  http://i.stack.imgur.com/1g6gW.PNG

  (4) now in one pages include mschart and open page design to ensure that the webconfig is changed to use the mschart.
  (5) now try to run the project.
  I get the error message like this one:
  Enter a description of the image here

  Is this a problem with blue windows or I do something wrong?
  FYI: This isn't my first project on windows azure.

  RuchitRami

  As far as I know Toshiba doesn't support this Microsoft stuff, so I think that Microsoft is the right address for these issues.

  Have you already checked that Microsoft saying about it?

• I'm not able to run windows update. [Error number: 0 x 80244019]

  I'm not able to run windows update. I get an error: [error number: 0 x 80244019] I took and I tried all the suggestions on the support for windows Xp article because that's what I'm running [error number: 0x8DDD0010] "When you click on a link, you see the error HTTP 500 - internal server, error 0x8ddd0010 error" but none of these solutions work.  I tried the ' Fix It program this car works but askes me to install Windows XP Service pack 3 or later and .NET Framework 2.0 or later version of windows update but as you can see I can't get windows update to work if it does not really help. "  Any ideas... Help, please!

  What XP SP level are you at?

  For your error: http://support.microsoft.com/kb/883820

  But that will not help you if you are not at the level of SP3.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Not able to run oracle ADF application (.ear) in integrated Jdev wls

  Hello
  
  I'm not able to run a simple ADF application in Integrated WebLogic Server of JDev. This application (.ear) worked very well before in the same jdev (11.1.1.3.0).
  
  The error of fact face is
  "< 20 July 2012 12:47:54 IST > < WARNING > < hats > < BEA-149007 > < new location source, 'C:\Documents and Settings\Atul Singh\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\CallTracker', can be deployed to configured application, ' CallTracker [Version = V2.0]. The source of the application is 'C:\Documents and Settings\Atul Singh\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\upload\CallTracker\V2.0\app\CallTracker.ear'. Changing the location of the source is not allowed for a deployment earlier attempt. Try to deploy without specifying the source. >
  
  I checked the error in documents:
  
  BEA-149007
  ATTENTION: New location of the source, "newPath", can be deployed to configured application, 'name '. The source of the application is to 'configPath '. Changing the location of the source is not allowed for a deployment earlier attempt. Try to deploy without specifying the source.
  
  Description you cannot specify a new source for an application previously configured with another source.
  
  The cause of this error occurs when you try to change the location of the source for an application previously configured.
  
  Action deploy your application with the same source location that has been configured in the application.
  
  But I don't know where to change the location of 'source' or how to deploy "without specifying the source.
  
  Please notify.
  
  Best regards, Atul

  (a). after that you cancel the deployment by using the console, do not use the console to deploy it... just run your JDeveloper application
  (b) unless you tell us what real errors, there is not much more to say

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Not able to run RealPlayer on the Windows XP machine, the file msvcp90.dll is missing

  Dear Sir / Madam,.

  Pls help advise the question of 'not able to run RealPlayer on Windows XP machine, file msvcp90.dll is missing'?

  Thank you!

  Hi EddieFang,

  Try to download and install real player http://www.real.com.au/.

  I hope this helps.

• MAF: Not able to run the sample project or a simple project with only one page

  Hi all

  I am trying to run examples of applications of the MAF delivered with Jdeveloper 12.1.3. I am not able to run these applications on the device in the emulator. They gets deployed successfully. However, when I try to open these applications, it hangs on the initial screen of the Oracle.

  I even tried to create a new MAF application with only a device with a page of the AMX. Tried to deploy, but still get the same result.

  No idea what could be the problem?

  Thank you

  Ajay

  Hello

  Problem has been resolved, after the re-installation of the Jdev and MAF extension.

  Understood that somehome, maf - application.xml couldn't refer to the features of the maf - feature.xml. When I created a new feature in the MAF - feature.xml, it was the adfmf - feature.xml and maf-application creation could refer to the functionality of this file.

  This seems to me an installation problem. I have therefore re-installed, now its works very well.

  Thank you

  AJ

• The host CPU is not able to run 64-bit virtual machines

  I am running VMWare Server Console on a Windows 2003 64 bit OS 1.0.3 and prepare to create a 64-bit VM server to test a new application on.  This forum server works on is a SuperMicro SuperServer 6025 B - TR +.  I entered the bios and activated the virtual bios in the CPU settings.  However, when I start my VM, I get the following error:

  «You have configured the virtual machine as an operationg system 64-bit client.»  However, this host processor is not able to run 64-bit virtual machines or this virtual machine has 64-bit support disabled.

  I looked online and saw some references to allow an EM64T which was to be activated but I do not see this option in my BIOS.  Someone at - it any other suggestions as to what I have to do to get the virtual machine to use the 64-bit compatibility.

  Unfortunately, the 1.x server logs are a little sparse in this regard.  However, it seems that you have mixed steppings of physical processors.  In this range of models, Intel changed the VMCS review between the Bx steppings and Gx steppings ID, making it incompatible for the execution of VT - x.  Realizing their mistake, Intel has provided to OEMS for a microcode patch that makes the revision ID the Gx stepping VMCS matches that of the Bx stepping.  OEMs distribute this patch of microcode as a BIOS update.

  In short, an update of the BIOS of your system provider should solve the problem.

• Mac Pro Dual Quad 3.0 GHz (8 cores - April 2007) not able to run 64 bit comments

  Help, I should be able to do.

  See this thread, because it is a similar issue that only my machine does not all 64-bit indicating my machine does not support hardware virtualization

  http://communities.VMware.com/thread/143298?start=0 & tstart = 0

  Here is what I get:

  * "VT operation is not supported by this VM configuration. " *

  You have configured the virtual machine to use an operating system 64-bit client.  However, this host is not able to run 64-bit virtual machines or virtual computer has 64-bit support disabled.

  + For more information, see http://vmware.com/info?id=152""+ "

  Running on the latest version, but this problem has always been there in previous versions (2.0.5)

  10.5.7 (failed in earlier versions either)

  8 GB ram

  2 TB of storage

  Tried the switch recommended on the config file but nothing.

  Thank you

  You have only one physical processor that implements revision VT VMCS a 7 and another that implements revision VMCS VT 11.  These processors are not compatible for execution of VT.  One processor is family 6 model 15 stepping 7 and the other family 6 model 15 stepping 11.  Intel has released a firmware fix that resolves this problem for the processors that differ only by deepening.  You should check to see if there is an update of the firmware from Apple that contains this fix firmware.

• Not able to install Windows mobile device Center 6.1 in the context of the system

  Hi all

  We are not able to install Windows Mobile device Center 6.1 in the context of the system. We have only 2 options to install any application via SCCM. (1) user, 2) system context. In the context of the user, we will not be able to install the application and system installation of context is a failure. Exe installs fine when we run as admin, but we do not have admin context option in SCCM 2012. Please confirm that we have any other new exe or we can not install in the system context.

  Kind regards

  Ashok

  To help you install Windows Mobile Device Center on Windows 7, see the Jason-H position of this link.

  Let us know how it goes.

  Thank you.

• not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. What is the full and exact error message?
  4. have you set a password to the shared printer?

  Please answer these questions and provide us with more information. This could help us help you better.

  See the articles that may be useful.
  "Access denied" error message when you print to a network printer, or view the properties of the printer
  http://support.Microsoft.com/kb/307053
  Cannot use network printer if your password is not saved
  http://support.Microsoft.com/kb/312055

• MSN - CRASH - TECH MSN TOLD - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL

  MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I downloaded several updates available for Windows Vista and since that time, I was not able to access my emails. I use netscape and the page opens and freezes.

  I downloaded several updates for vista (no critical updates) and since that time, I was not able to access my emails. I use netscape and the page opens and freezes. What should I try?

  original title: EMAIL GEL

  Hello

  What updates do you have installed?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• im not able to log out of facebook, there is no error, the place where you disconnect everything isn't here

  im not able to log out of facebook, there is no error, the place where you disconnect everything isn't here

  Contact Facebook support.