Not able to run standalone Photoshop CS6, error "go into the Manager of subscription and subscription renewal.

Similar Questions

• I'm not able to run windows update. [Error number: 0 x 80244019]

  I'm not able to run windows update. I get an error: [error number: 0 x 80244019] I took and I tried all the suggestions on the support for windows Xp article because that's what I'm running [error number: 0x8DDD0010] "When you click on a link, you see the error HTTP 500 - internal server, error 0x8ddd0010 error" but none of these solutions work.  I tried the ' Fix It program this car works but askes me to install Windows XP Service pack 3 or later and .NET Framework 2.0 or later version of windows update but as you can see I can't get windows update to work if it does not really help. "  Any ideas... Help, please!

  What XP SP level are you at?

  For your error: http://support.microsoft.com/kb/883820

  But that will not help you if you are not at the level of SP3.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Not able to run standalone LabVIEW RT application cRIO (works well in development mode)

  Strange question.

  I'm trying to deploy an application of RT to a controller for cRIO-9074.  I developed the application in development mode and everything works and seems to be being debugged.  However, when I try to build and to deploy the application as the startup, the application seems to start running, then stop cold (based on the CPU usage as described in the Distribution System Manager OR).  At this point, I can't debug because the application is stopped (no updated variable).

  The problem seems to be related to the NI_AALPro.lvlib library, because if I turn off the function polynomial evaluation, the code will compile and start fine.  I'm tempted to recreate the necessary functions and create my own library, but I prefer to find the problem and fix it rather than re-create the wheel...

  Is it possible that the library badly uploaded to the controller?  If so, is it possible to force the appropriate library to be transferred to the controller?

  Thanks for any help.

  Toader,

  Thanks for the reply.

  I think I solved the problem.  For some strange reason, the functions inside the NI_AALPro.lvlib were not available on the cRIO at run time when the application tried to run in stand-alone mode.  I ended up adding the library to the section to always include the source files tab in build specification and the program runs now.  I'm not sure what it is, but it works.

  Thank you Morgan of NOR.

  Kind regards

  Big Ev

• Not able to repair Windows XP computer error cannot find the file [e1e5132.sys].

  Original title: need help to use the repair feature when you use the disk of resettlement for XP Media Center 2005.

  I cannot using the repair on Windows XP Media Center 2005 feature.  I started the repair process and enter the installation phase, but the installation stops because it cannot find the file [e1e5132.sys] which is a Windows\System32 folder.  I managed to download a Pack which included the file (using another computer), but I can't properly cancellation of the installation in order to install the file in the appropriate location.  Whenever I try to restart the computer, it goes immediately to this part of the installation of the repair process.  Even when I try to restart without reinstall into the CD drive; When the reinstallation disk is removed and I try to restart, it requires me to insert the disc to continue to the reinstall.  Help - How can I back out of the reinstall, so that I can add the missing file first?

  Hi Stephdan,

  1. have you done any hardware changes or software on your computer before this problem?

  2. Why are you trying to fix the computer?

  It would be possible that the Windows XP installation disc is damaged.

  (a) you can try to do a Windows XP disk which should correspond to the same edition, as it is installed on your machine.

  (b) later, try to repair the installation and check if you are able to boot to the desktop normally.

  Perform a repair Installation

  
  Note: however, you should not have Service Pack 3 installed on the computer before you run repair installation.

  Hope the helps of information.
  Please post back and we do know.

• Not able to run autoruns, message "change of status of the element. The system cannot find the file specified. "

  Original title: autoruns

  Hey ppl so I downloaded autoruns and tried to use it on my office yesterday and I get an error message every time I try to uncheck an app.

  The photo above shows the error message. Can anyone help me solve this problem, because I'm a big fan of autoruns and I use it on almost all of my client computers even my old computers. Help, please! Oh and I am running Windows 7 Professional x 64.

  You can try to remove the following values from the registry, restart the PC and then check:

  HKCU\Software\Microsoft\Windows\CurrentVersion\Run\AutorunsDisabled
  HKLM\Software\Microsoft\Windows\CurrentVersion\Run\AutorunsDisabled

  If this does not work, you can post your request here:

  http://Forum.sysinternals.com/autoruns_forum16.html

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I'm not able to run a Windows Azure application

  I have a very strange problem.

  I'm not able to run an application in windows azure has a WCF service and mschart inside. Here are the steps to reproduce the error:

  (1) create a new windowsazureapplication with an empty asp.net webrole
  (2) now to add a new WCfService
  (3) run to make sure it works ok

  http://i.stack.imgur.com/1g6gW.PNG

  (4) now in one pages include mschart and open page design to ensure that the webconfig is changed to use the mschart.
  (5) now try to run the project.
  I get the error message like this one:
  Enter a description of the image here

  Is this a problem with blue windows or I do something wrong?
  FYI: This isn't my first project on windows azure.

  RuchitRami

  As far as I know Toshiba doesn't support this Microsoft stuff, so I think that Microsoft is the right address for these issues.

  Have you already checked that Microsoft saying about it?

• not able to run micro security essentials says need to reinstall the client security micro

  not able to run the bases of microsoft security said that I need to install the microsoft security customer no idear was to conclude this

  Additional posts appear in the MSE Forum:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning/i-have-error-code-ox-80070715/578e0e44-99c9-4293-b75e-79e2ff1dc2b6

  http://answers.Microsoft.com/en-us/protect/Forum/protect_updating/not-able-to-uninstalll-micrisoft-security/f3bb8423-3671-453F-BB30-8b7f3e53daad

  Recommended as previously you could try to uninstall your MSE, then download and install a new copy of: File of Installation of MSE

  If it does not contact the MSE Support as previously suggested.

• My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about t

  My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about CS6, rebootet and so forth--nothing worked. Two hours later, I tried to install DW 5.5 - that worked. Then I tried again to install 6.0 - without success. Can anyone help?

  Thank you for your response. I could not find caps.db.

  Meanwhile, I solved the problem as follows: I searched "dreamweaver" everywhere one deleted all that I could find. Then I googled "CS6" and did the same. I guess that there are around 20 or more places where I deleted files or directories. Suddenly, installation has not prevented, to 2%, what he has always done before and the installation was a success :-) It cost me more than 4 hours to understand this, and I have found a trick somewhere really help. Adobe itself I could not contact because I couldn't find an email address or a phone number - poor support for such expensive software. For luck, I didn't deliver something just in time. Missing a useful support, it's an attitude really poor, poor Adobe... I think that I do not buy not more products Adobe - it could cost too much of my time... :-(

• Not able to run oracle ADF application (.ear) in integrated Jdev wls

  Hello
  
  I'm not able to run a simple ADF application in Integrated WebLogic Server of JDev. This application (.ear) worked very well before in the same jdev (11.1.1.3.0).
  
  The error of fact face is
  "< 20 July 2012 12:47:54 IST > < WARNING > < hats > < BEA-149007 > < new location source, 'C:\Documents and Settings\Atul Singh\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\CallTracker', can be deployed to configured application, ' CallTracker [Version = V2.0]. The source of the application is 'C:\Documents and Settings\Atul Singh\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\upload\CallTracker\V2.0\app\CallTracker.ear'. Changing the location of the source is not allowed for a deployment earlier attempt. Try to deploy without specifying the source. >
  
  I checked the error in documents:
  
  BEA-149007
  ATTENTION: New location of the source, "newPath", can be deployed to configured application, 'name '. The source of the application is to 'configPath '. Changing the location of the source is not allowed for a deployment earlier attempt. Try to deploy without specifying the source.
  
  Description you cannot specify a new source for an application previously configured with another source.
  
  The cause of this error occurs when you try to change the location of the source for an application previously configured.
  
  Action deploy your application with the same source location that has been configured in the application.
  
  But I don't know where to change the location of 'source' or how to deploy "without specifying the source.
  
  Please notify.
  
  Best regards, Atul

  (a). after that you cancel the deployment by using the console, do not use the console to deploy it... just run your JDeveloper application
  (b) unless you tell us what real errors, there is not much more to say

• The host CPU is not able to run 64-bit virtual machines

  I am running VMWare Server Console on a Windows 2003 64 bit OS 1.0.3 and prepare to create a 64-bit VM server to test a new application on.  This forum server works on is a SuperMicro SuperServer 6025 B - TR +.  I entered the bios and activated the virtual bios in the CPU settings.  However, when I start my VM, I get the following error:

  «You have configured the virtual machine as an operationg system 64-bit client.»  However, this host processor is not able to run 64-bit virtual machines or this virtual machine has 64-bit support disabled.

  I looked online and saw some references to allow an EM64T which was to be activated but I do not see this option in my BIOS.  Someone at - it any other suggestions as to what I have to do to get the virtual machine to use the 64-bit compatibility.

  Unfortunately, the 1.x server logs are a little sparse in this regard.  However, it seems that you have mixed steppings of physical processors.  In this range of models, Intel changed the VMCS review between the Bx steppings and Gx steppings ID, making it incompatible for the execution of VT - x.  Realizing their mistake, Intel has provided to OEMS for a microcode patch that makes the revision ID the Gx stepping VMCS matches that of the Bx stepping.  OEMs distribute this patch of microcode as a BIOS update.

  In short, an update of the BIOS of your system provider should solve the problem.

• Not able to run RealPlayer on the Windows XP machine, the file msvcp90.dll is missing

  Dear Sir / Madam,.

  Pls help advise the question of 'not able to run RealPlayer on Windows XP machine, file msvcp90.dll is missing'?

  Thank you!

  Hi EddieFang,

  Try to download and install real player http://www.real.com.au/.

  I hope this helps.

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• I'm not able to install adobe photoshop trial version

  I'm not able to install adobe photoshop trial version

  Hello

  Please tryDownload Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  https://helpx.Adobe.com/creative-cloud/help/download-install-trial.html

  Concerning

  Kuldeep