Not able to see common services in the services of the Foundation

Similar Questions

• Not able to see planning applications in the drop in 11.1.3

  Hi all
  
  I recently installed hyperion 11.1.3 on windows server 2003 on my lap. I created planning applications in the workspace and rigestered with shared services.
  
  But when I open the planning using http://localhost:8300 / HyperionPlanning, I'm not able to see the applications in the drop-down list. Its display no request is available.
  
  Could you tell me what I did wrong, how to get it work.
  
  Concerning
  Billon

  Hi Bhaskar,

  1. run the planning server configuration utility,
  2. develop planning,
  3 eat planning Cluster,
  4. click on enable the Cluster.
  5. I guess you used the default value, Cluster when creating the application, select who
  6. next, and then click Finish.
  7 restart schedule,
  8. try to access you request now.

  See you soon... !!

  Rahul S.

• I have hp elitebook 8440p, I inserted the sim card, but I'm not able to see where to configure the sim card

  Hi I have a hp elitebook 8440p but I did not; KWN how to use sim card option, I inserted the sim card, but now I can't see wher to configure the sim card or use, cos I m unable to see any option, so please help me

  Hello

  The HP EliteBook User guide contains information on what is required to configure the module top mobile broadband in your mobile workstation. Go to the HP Web site for more information about the configuration and activation of the SIM card.

• Not able to see Slui.exe into the computer it says no real computer.

  Original title: slui.exe gone AWOL

  Hope I'm in the right topic/sub topic offered by the Windows menu.

  I am running a genuine Windows 7 Home Premium SP1.

  This morning, it started with the news that my Windows is not genuine!

  Nothing new there for me or for some of you either I think.

  However, trying to put my product key check my copy, I get a message that "slui.exe is not! So I seek "slui.exe" and he's not here on my drive? How to get back this file please? Damien

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Try again.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• I try to communicate with the third instrument via the usb port but I don't know how to do same in nor-max, I'm not able to see devices usb port symbol and section of the Interface.

  Hello

  I am tring to connect my power supply that is not or via a USB cable, but I am not able to see my connection or the not-max usb symbol.

  first time I use it will you please guide me, and is there a driver I need to download for this? Here, I put one attachment regarding this.

  Thanks in advance.

  
  

• When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

  When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

  original title: list of Network Service does not illuminate

  Hi SikDude,

  Please use the Forum of the community for Vista.

  Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

  Please let us know if we can do something else.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  MacBook details below?

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Thank you

  gis_abc

  

  He seems to show NVIDIA graphics card.

  Kim

• Not able to see the Administration tab for Admin users to one of the Planning Application.

  Hello

  We use the Hyperion Planning 11.1.2.2 and when I connexiona one of the planning application, I'm not able to see the Administration however when I connexiona other applications I see the administration tab.

  "" What I did is that I created a test user in the native directory services shared and implemented the "interactive user" role of the application. When I logged in one application, I don't see the administration tab however when I logged into another application, I can see the administration tab.

  can someone help me solve this problem.

  Did any who face such a problem before. Thanks in advance

  Kind regards

  VJ

  We must reconfigure the deployment on application server and Web server after installing the patches, and once reconfigure us the Java heapsize would become by default that we must change them by going to regedit and this is how the above question will be resolved.

• Not able to see the Administration of peacebuilding

  Hi all
  
  I'm not able to see Administration of Consolidation to navigate-> administer-> classic Application Administration.
  But I am able to see the Applications-> building-> here, I'm able to see applications created.
  
  After you have created the HFM destop applications, I'm trying to access the workspace of I get error not registed with shared services.
  I registered with "HFM Application Registration.exe" always I get the same error.
  
  in shared services also if I select the application created in the projects HFM getting the error "the application is idle. How to activate an application?
  
  Please, let me give you the solution, if anyone knows
  
  Thanks in advance
  Kiran

  In this case, I think that there is no real need to change the ports to solve the problem. What you need to do is to reconfigure the Web server configuration Hyperion Reporting and analysis . If, after that, you still have the same problem, take a step back and redeploy them to the application server as well. Several times in the past I had to go back to the beginning (SSP) and reconfigure everything from scratch. Finally it worked well.

  Provided that we have understood by encounter the same problem with 9.3.1 we concluded that when you install the suite on a server that may not be a great material, you must pause and wait until between installation and configuration steps, so that services previously installed to start running for good. However, as soon as you start the shared services and the windows services console indicates the service as it is started, it sometime before it really started. If during this time, you will install and configure the next products (hfm, reports, etc.), the configuration is successful, but we are left with the problem of opening the applications through the workspace.

• Not able to see anything the user

  Hello
  An of my user is logged in presentation for the first time Services and she sees nothing, I can it it when I connect to by Admin, I even added areas, but she is still not able to see anything, what could be the problem. She has disconnected and connected again couldn't see we need to do anything once the user connects for the first time.
  
  Quick help is necessary.
  
  Thank you
  Amit

  Hi Amit,

  What are exactly did you see? When you connect to do you get the below message?

  ! http://i45.Tinypic.com/30ximab.PNG!

  Or do you simply not dashboard/reports shared dashboards?

  If you get the above screen message, then you must:
  1) go to settings-> Administration-> Manage privileges.
  (2) under 'Access' make sure that 'Everyone' has access to dashboards and answers or specific users can access.

  If you do not receive the message above, but only can not see any shared reports try the following
  1) go to settings-> Administration-> manage presentation catalog
  (2) where it is said: ' catalog root: shared "click on catalog root
  3) click on the Permission (Lock) icon next to the shared folder
  (4) make sure that everyone has "read" permission
  (5) make sure that the two boxes (apply permissions to subfolders) and apply to the items in the folder are checked
  (6) give of course is not contradictory permissions (as everyone has read but specific is denied read).
  7) click done and accept the updates warn that it gives you.

  One of those who should fix this for you.

  -Joe

• Not able to see the profile picture of the people

  Not able to see the profile picture of the people while seeking their

  How long it will take.

• Not able to see the semi colon and comma when sending email

  Hello

  I am not able to see the semi colon and comma everything by typing the e-mail address to "TO" However in the body of the email, I'm able to see.

  Thank you

  Rakesh K *.

  ***********

  The comma and semicolon are on the digital keyboard.

  Click on the '123' button at the bottom left, and then you will see them.

  UPDATE: the above is true then in the text box.  Sorry I misread your question and thought that was what you were asking about.  The semi-colon and comma are without function in the recipient area.

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.

• Due to the virus fix, I am not able to see my C drive files

  Original title: help

  Due to the virus fix, I am not able to see my C drive of files (showing 0 items in a folder, but it has a size correct ex: 7 GB). I use Windows XP sp3.

  Even my Start menu options and the Office were empty and the task manager has been disabled.

  I tried to restore my laptop but no luck.

  Please help me get rid of this virus.

  I've never seen any person related Microsoft solve this problem (no Microsoft KB article), but you can fix it using the instructions and tools to other people who actually thought of it and actually know how to repair and have actually fixed properly (without a lot of difficult things that might work sometimes maybe).

  You need as a result of suggestions from people who have actually seen and that fixed it and not people who have never really seen or actually fixed and have no idea how to solve this problem.

  And I don't know of many contributors to the forum very well - I'm no Microsoft Support and the support engineers talking Microsoft product.

  Avoid the wild goose huntingSupport Engineer.

  If any Microsoft Support person wants their infected system like this on purpose so you can actually learn how to solve this problem, I'll be happy to tell you how.  I can assure you that the solution is not in all the Microsoft KB articles.

  Here are two links that you read through that show you how to fix this familiar problem.  I read through them all the way in poking around on our system and then when you know what you have, apply the instructions to work.

  Grinler, BleepingComputer, published detailed instructions and has the executable that you need (unhide.exe) to see the rest of your articles:

  http://www.bleepingcomputer.com/forums/topic405109.html

  A poster called rpggamergal wrote similar instructions here:

  http://www.experts-exchange.com/A_6209.html

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner