Not able to share the internet connection WiFi ad-hoc assistance.

Similar Questions

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Why programs not marked in the list of windows firewall exceptions are still able to maintain the internet connection?

  Original title: exceptions to firewall

  Can someone explain how I have after uncheck the programs in the list of windows firewall exceptions, they are still able to maintain an internet connection? I use XP sp3.

  1. what makes you think that this unnamed programs are still able to maintain an Internet connection?

  2 Windows Firewall blocks unsolicited incoming connections.  Thus, for example, if you (or malicious software), set up a FTP server running on your computer, Windows Firewall will block an application from the Internet on your computer that are trying to establish a connection and download some of your files.

  However, when your web browser sends a request to a Web site server to load a page, incoming web server traffic is allowed because it's in response to a request made on your computer.

  This distinction between the incoming and outgoing traffic is why some people insist that the third-party firewall, which usually block/monitor of traffic in both directions is required.  The scenario is that you inadvertently introduce malware on your computer (in any number of ways), and then the malware "phones home" to establish a link with the bad guys, who continue to do what they want on your computer.

• Cannot share the internet connection on the network with sprint card

  Hi all

  I'm stumped on this one. I'm working on my network of fathers, and he lives in a rural area. Unfourantely, there are not a lot of internet service here. It uses a printed card that connect locally to a windos vista home pc. From there on, the connection is shared and that the pc is connected to a linksys router. The router, then hosts a wireless network and hard line connections. About three weeks ago, the Internet stopped working except the computer, map of sprint is hung directly. I tried the following options below to solve the problem.

  1. I can plug the card sprint to any computer and it works.

  2. I replaced the network adapter on the host computer

  3. I have tried the card sprint on other computers and tried to share from there. Same result

  4. replace the router

  5 opportunity anotehr card Sprint which has been known to work

  6. replace the network cable between pc and router

  7. I tried removing the router from the equation and ran a network of host pc card form for directly to another computer

  8. the host and also renovated of other computers reformated

  9. do you have an ipconfig/release and renew

  10 tried sharing all NICs on the host PC

  When sharing the connection, I can see all the computers on the network. They arise, there is simply not an internet connection.

  The only mistake that I seem to get is not able to find the DNS. I put everything on dhcp.

  Any ideas that anyone can come would be most appreciated. Thank you

  Hello

  Step 01:

  I suggest you follow the same steps as expected here to set up the ICS (Internet Connection Sharing) host computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Step 02:

  I also suggest you to follow the link and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-settings-for-ICS-Internet-connection-sharing

  For more information, please follow the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

• Connect a Vista PC (host) with an XP PC in LAN and share the internet connection.

  I connect to internet using 3 different notebooks with Windows Vista with a wireless connection to a router and the DSL modem. I have a desktop PC XP computer in a secluded spot in my house, who does not have a wireless card. When I want to use the internet in Office XP, I connect it to a laptop using a LAN cable.

  I was able to do that with 2 of my notebooks (set up the network and share the internet), but with the third Vista notebook, desktop XP can't get the internet connection established. I was not able to detect which is the problem.

  First question: clues to debug this problem?

  Second question: I would like to start over again and configure everything again with this third book. How should I proceed?

  Turn on Internet connection sharing on the Vista wireless network connection.  If asked what to use for the home network connection, tell him to use the connection to the Local network. Then check the State of TCP/IP on both computers:

  1. On the Vista computer, right-click on the connection to the Local network, and then click on status > details . It must show:
     • IP address: 192.168.0.1
     • Subnet mask: 255.255.255.0
     • Default gateway: no
     • Server DNS = none
  2. On the XP computer, right-click on the connection to the Local network, and then click on status > support > details . It must show:
     • IP address: 192.168.0.x (1<>
     • Subnet mask: 255.255.255.0
     • Default gateway: 192.168.0.1
     • = 192.168.0.1 DNS server

  Boulder computer Maven
  Most Microsoft Valuable Professional

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• Why am I not able to share the new folio files?

  I was able to share files of folio fine. Then last week, the slips were download not to the people, I shared with. In addition, when you go into the app from producer of folio, the titles of the articles are there, but the content does not appear. However, I am able to download the folio on my ipad when I connect, although if I connect with the same credentials on a different ipad, nothing shows. I don't know what is happening here. I updated with all the latest tools of folio and downloaded the ipad rebooted more recent content viewer. I created the folio in cs5.5 6 and still nothing. The only unusual thing I'm done my files for the retina, but my full folio is only about 100 MB. This seems to have started just after the recent tools folio updated in June. any help would be greatly appreciated as I work for a very important client.

  see you soon

  Create a new folio with the same files but do it in 1024 x 768 and let us know if it works.

  BTW, are the 2048 x 1536 files? Who has not recommended... use 1024 x 768 and the value of the folio 2048 x 1536.

  Bob

• PlayBook Simulator not able to access the internet

  Hello

  I'm trying to get the Playbook Simulator running to repackage an app, but I'm unable to get the Simulator to connect to the internet.  The browser refuses to connect and just displays a message indicating:

  Error
  A network error has occurred.
  Please try again later.

  I tried some things, like change network card settings in VMware default (NAT) to Bridged and then restarting the virtual machine, but that did nothing. I tried to remove the virtual computer's network card, and then by adding a new.  I disabled the Norton Internet Security firewall and intrusion prevention.  I have disabled the Windows Firewall.  None of this solves the problem.

  I use a Windows 7 laptop connected to a wireless network.  No VPN or proxy is in use.  Windows 7 network adapters screen shows two cards VMware, vmnet1 and vmnet8, both connected to an 'unidentified network'.  I tried to fill these my PC wireless cards, but the VMware adapter did not allow that and threw an error.

  Any suggestions?

  Some basics: Verify there is an IP address on vmnet8. Verify that you can ping your host operating system.

  If it still does not work, cut the developer mode (on-> them security), then try again the browser. Yes, I know it sounds counterintuitive, but it worked for me.

  You can re - switch to developer mode, once you have turned it off and it seems fine. You don't quite know why this is happening, but it might be useful to take a VM snapshot once you've cracked.

  Good luck!

• BlackBerry Smartphones not able to access the internet with the new carrier

  I use a curve 9220. I was using the Vodafone network. But just shifted to Airtel. I inserted the sim card in the handset. Signals come very well. But I'm unable to access the internet even though I subscribed to a prepaid internet pack.  The messege is coming like this:

  Navigation via the cellular network is not part of the includedas of your current service plan. To browse the web, you should use the Wi - Fi or contact your service provider to change your service plan.

  When went to Airtel site for mobile internet settings, I had something like this:

  Your handset does not support live Internet settings. Please refer to the table below to configure the settings manually.

  Name of the parameter
  Account name:	Airtel (GPRS)
  User name:
  Password:
  «"" "Home page:»»"»	http://live.airtelworld.com
  Proxy:	Activated / no
  Proxy address and the server:
  Proxy port and the server:
  Data carrier:	GPRS or packet data
  Access point name:	airtelgprs.com
  Authentication type:	Normal
  Use preferred access point	NO.

  Please suggest what to do

  Only with BlackBerry 10 you can navigate without BIS, with old devices don't.

  * Like this post

• Impossible to share the internet connection on the mac pro with the 5s iPhone book

  Hi, I use Internet on my mac pro book using ethernet

  I try to connect to internet on my iPhone 5 s using internet sharing. When I try to connect my iPhone using wifi it shows that there is an authentication failure

  Please help me solve the problem

  Thanks in advance

  Hi Hima8,

  If you are unable to get your iPhone to connect to a network Wi - Fi, the article below the link Details a number of troubleshooting steps that may help restore his ability to do.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  All my best.

• Share the internet connection with Bridged mode

  Hello world

  I have a windows Vista as a host with Wi - FI where I installed Vmware server on it and I rode Windows XP with bridge connection.

  But I can't have internet on my Windows XP.

  Of course, it works with connection NAT but I want a bridge connection, so I can set a manual IP address to my windows XP.

  Here's how my Windows Xp is configured:

  IP address: 192.168.0.2

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.0.1 (this is my Windows Vista for IP configured on the NIC)

  Thanks for any help.

  Hello

  Check which physical adapter network bridge is connected to.  I assume that your host also has an ethernet port?  Run the application 'manage virtual networks' administrator and check.  You can use this to change the connection open to use the wifi adapter.

  Paul

• I have win XP Professional on my Presario CQ42-462TU. not able to find the driver for WiFi. pl help.

  I installed win XP Professional on my laptop Compaq Presario CQ42-462TU.  I could find most of the drivers on the HP website, but a compatible driver for winxp - wi - fi is not available.  in Device Manager, I find 'network controller' and "broadcom 2070 bluetooth" in yellow and question mark.  Help, please.

  Hello:

  This is the driver you need for your Broadcom 4313 wireless network card:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81551-1&cc=us&DLC=en&LC=en

  Try this package and Broadcom Bluetooth driver to correct your Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83092-1&cc=us&DLC=en&LC=en

  Paul

• How to share an internet connection broadband on the Satellite A200-1VG

  Hello
  I am very new in the world of laptops, 3 days old. In fact, I have a desktop computer (the OS is XP Professional) and just bought my self a Satellite A200-1VG (the OS is Vista).
  In my view, is it possible for 2 machines to share a connection high speed, but how I do not know. I must admit to be pretty ignorant when it comes to technology (you have probably gathered that now) and I ask that any given notice will be given in the language too technical.
  Thanks in advance for a novice.
  EGP

  Hello

  Of course, you can share the internet connection with 2 computers.
  If you have a WLan router, you can connect a computer to the LAN port and the laptop can be connected via Wireless LAN.

  You can also connect two computers to the LAN port. Some routers support two (or more) of LAN ports and assign TCP/IP addresses automatically.
  If your router supports one LAN port you could buy a Hub (or switch) for more LAN ports and connect multiple computers.

  Lastly but not least you can connect to the laptop of desktop PC, but the PC needs to be equipped with min 2 LAN cards.

  I would recommend a little goggling for more details. I m you will find some useful articles.

  Good bye

• Can someone help me with my problem on the Internet connection sharing?

  I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

  I am currently using windows 7. I hope some of you can help me thanks.

  

  It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

  Hello Fritz,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Additional information:
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to install the Bluetooth PAN, to share the Internet between Windows 7 PC and Samsung phone?

  Hello!
  I'm trying to connect my phone Samsung Galaxy Ace to my Windows 7 PC via Bluetooth and to set up a pan when my phone is connected via Bluetooth, it will appear in devices and printers, but when I open Bluetooth Personal Area Network, it is not at all. How can I configure a PAN which allows to share the internet connection from my PC to my phone?

  Original title: unable to connect to the Bluetooth device in Personal Area Network

  Hello
   
  Contact the support of Samsung for the support team.
  http://www.Samsung.com/us/support/
  
  
  Kind regards.