Not able to start agent cache for the requested data store

Similar Questions

• Need to create a structure for the target data store?

  Hi Experts,

  If I create a structure for the target data store, and then load the data from source to target works fine. If I make mistakes.

  Is necessary to create a structure for target?

  Please help me...

  Thanks in advance.

  A.Kavya.

  I found the answer. No need to create the structure for target temporary data store. and we need to create the structure for the permanent target data store.

• Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

  Original title: the awduu36e.sys file is not found.

  After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?

  "cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...

  Hi Kim,

  First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!

  OK the sequence goes as follows:

  1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.

  2. new screen - PCI resources; Checking DMI Pool etc. ;

  3. new screen - "Please choose which startup option:

  -Windows XP Home Edition

  -Installation of Windows XP.

  and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.

  4. new screen - "check you computer hardware configuration...".

  5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "

  As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.

  Other relevant points:

  -When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?

  -My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.

  Again thank you very much for the reply and any help you can provide,

  Kind regards

  Fraser

  Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
  
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• NOTE If ordering: could not able to find a source for the article ATPable

  Hi all

  I'm working on test cases where I need to activate the GOP if ATO model element. This model element is also seen point class option as well as a few a mandatory element and some optional component. Based on the selection of this option, * item will be created. I activated this CD in org1 to org2 and. I do SO the entry of the business unit belongs to the Org1.  Now, I have defined a global sourcing (enabled for all the org) for this model where transfer of org1 and transfer between org2 and is mentioned. In addition, I have created local sourcing rule in org1 than 'doing to org1' and sourcing rule in org2 and as "do to and org2. ATP is enabled for the item required org1 to org2 and. With this completed CAWC full refresh and then I tried to plan without mentioning the shipping warehouse. Here I'm note - 'couldn't be able to find a source; mention warehouse on line SO or set a sourcing rule.  Now if I quote warehouse on SO line, then planning will work perfectly.

  Believe that the GOP is not able to see overall supply rule IE 'org1 transfer' or ' transfer between org2 and. But I can work with local sourcing rule is to say 'make org1' or ' do to org2 and "if I mention warehouse on so.  so I did failed to make any other installation program in order to GOP advise me warehouse and corresponding available date?

  Please notify.

  Thank you / Dipak

  I got this answer to my own question. As we allow the GOP first, we must define certain profile options. as MRP: together for the assignment of ATP and MSC: ATP assignment together. This was missing. After you set this option to profile, it works fine.

  Dipak

• How to migrate Office persistent link clones of workstations for the new data store

  Hello. We have clones of persistent link to view running in the environment from our view. We need to migrate these desktops to new storage. Rebalancing is out as this will include a refresh operation - destroy anything and everything installed in c:\ of the user. Is there a method to migrate Desktop clone link persistent to a new data store, while keeping the office in the same exact state (i.e. c:\ is not updated).

  Thank you

  Never say impossible. I came across the solution when I read the article by Duncan Epping:

  http://www.yellow-bricks.com/2012/03/15/Dr-of-view-persistent-linked-clone-desktops/

  I have that for my situation. Basically, replicate data from view in the new storage warehouses. Set up data warehouses replicated without re-signing with the cluster of ESXi. Turn the power off and unsubscribe the vCenter view workstations. Save the workstations from the data store replicated/mounted to vCenter and power over desktop computers.

  VCenter, nothing dramatic has happened if she sees just as vm being unregistered and re-recorded activity from the same exact data store (the same UUID). View Admin is happy because he sees just the events as desktop computers that have been turned off and then subsequently in reverse. Nothing has changed regarding the database to view ADAM, we still use the same data warehouses.

  I have already tested before for a scenario of View DR, and he succeeded. Between remembering who and Duncan's article helped me to adapt the same process for this. Nothing is impossible

• Script for the content data store

  Hello

  I'm new in the world of Vmware of scripts.

  I used powercli and real working examples of scripts to find my way.

  I am trying to create an inventory of the existing infrastructure of vmware.

  I have a list of all the VMS and their data store, but I also need a data store content.

  As:

  a list of all the stores of data in a data center.

  Download all the contents of the data store (folders, files vmdk, iso files, other files)

  A list of all the folders / files with VMservers still known in the inventory.

  The goal is to know if there are any files/VMservers on the data store, which are no longer in use and to check if we have duplicate in other data stores files

  Thanks in advance for any assistance.

  Best regards

  Dany

  Take a look at the data store provider

  Try something like

  dir vmstore: \-recurse

• Deployment uses the local data store

  The deployment of VIO works without problem, but one of the virtual machines (VIO-DB-0) is now in a local data store. I never chose this data store in the installation process.

  Is it possible to manually move the virtual machine? Is it possible to define the data store used for the management of virtual machines somewhere?

  Concerning

  Daniel

  Hi Daniel,.

  Take a look at VMware integrated OpenStack 1.0 Release Notes:

  • Installer gives priority to local storage by default
    When you set up the data for the database stores three virtual machines, VMware OpenStack Setup integrated automatically gives priority to a local storage to improve IO performance. For resilience, users might prefer a shared storage, but the installer does not clear how to change this setting.
  • Workaround: Before completing the installation process, the installer of VMware OpenStack integrated allows you to examine and change the configuration. You can use this opportunity to change the configuration of the data to the database store three virtual machines.

  If you have already installed VIO, AFAIR you should be able to manually move between data warehouses as long as you do not change VM itself.

  Note that there is rule anti-affinite, so you may not be able to move that VM in the same data store when no other VIO - DB resides.

  Another note is that if you turn off VIO-DB-0, mysql service will not appear automatically. you have to turn on manually by running "service mysql start" on the node itself, or run 'vioconfig start' of the SGD server.

  Best regards

  Karol

• DTS moves to the same data store

  Greetings,

  We are short v5.5u1 esxi and vcenter device with DTS clusters installation using thresholds to space only at this time. We do not limit our VM to place records on the same data and store, and in view of the virtual machine can have his records scattered across data warehouses in a cluster of the DS.

  We have many events that seem to do nothing is represented below.  Everyone agrees that something actually happens or vcenter turns his wheels?

  

  Thank you

  Ron

  Just answered my own question... it has to do with my scattered placement of vmdk. Since the vmx file lives on a given data store, the event shows that the activity... However if you check the DTS tab for the cluster data store you will find the disks associated with the virtual machine on other data warehouses were actually moved.

  

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Message when you try to print "AcroRD32.exe impossible to locate the"..." "Componet app was not able to start because"DLBAGF. "DLL"

  I am trying to print a document and I get this message "AcroRD32.exe Unable to locate component"... "app was not able to start because"DLBAGF. " DLL' not found... Reinstall the application can solve problem... can you me please help... Thank you

  Moved from feedback

  Original title: my problem is with Microsoft Adobe...

  No problem.

  This link can be a good start for you.

  http://forums.Adobe.com/message/4957379

  Good luck with the resolution of the problem.

• Not able to start the trial

  I thought I'd give Revel to try, so I just installed the soft of Revel for iPhone on my iPhone4 (running ios 6.1.3).

  I loaded the application; entered by Adobe ID; received a verification email and clicked on the link; entered my date of birth, as requested (why?) and then I get the following error message:

  Not able to start the trial

  There was an error at the start of the free

  trial. Check your network

  connection and try again

  I'm sure it's not a problem with the (WiFi) network connection and I have uninstalled and reinstalled the software and restarted the iPhone for good measure, but I still can not past this.

  Can someone tell me where I'm wrong?

  Thank you!

  Problem solved!

  I connected to the adoberevel.com with my Adobe ID and uploaded a single photo.

  Then I deleted and reinstalled the iPhone application, and this time accepted soft my Adobe ID without problem and displays the photo uploaded. All the features now seem to be working OK.

  I hope this will help someone else with a similar problem!

• I resized the partition of C: Lenovo IdeaPad Y500 laptop with the partion of aomei assistant and now I'm not able to start.

  Original title: I messed UP WITH MY 8 PREINSTALLED VICTORY AND IT DOES not START NOW

  My lenovo ideapad y500 supplied with windows 8 pre installed. I wanted to set/resize partitions as the laptop has been delivered with a single partition (C :). after I resized with the partion of aomei Wizard something happened and now I don't am not able to start. my laptop has been delivered with the pre-installed operating system, and she had no DVD of win8. I dinot do the recovery disks either. Some say that the product key is injected into the bios) , so I neednt worry about losing the win8 original license. any means now what shud I do to get reinstalled 8 victory! where can I download an image of victory 8 to install?

  LENOVO has this option of key recovery is not working too now that I changed the partitions. (IE it works if the partitions are unchanged)

  Help, please!

  You have an OEM key - make sure that it is the OEM version of win8.

  Lenovo has a drive engineering key which one of its options is to repair the functionality of the button a magical touch.

  Ask in the Lenovo forum if they can direct you to the download of recovery engineering key a repair disk and how to fix your recovery button.

  http://forums.Lenovo.com

  Can you get to a command prompt to start with a system repair disc or the installation or the upgrade disk...

  and taste the repair orders bootrec.exe/fixboot would be a good idea to start with.

• Hello, I have Wacom product code in Exchange for buying one. On the CC here there is a button that says "Download" (and not "download trial"), so it seems for the status. But when I press it it says download started, but in fact it didn't.

  Hello, I have Wacom product code in Exchange for buying one. On the CC here there is a button that says "Download" (and not "download trial"), so it seems for the status. But when I press it it says download started, but in fact it didn't. What seems to be the problem?

  Hi Lex % 20Draijer,

  You can try the same thing using a different browser.

  or you can download Creative Cloud via https://www.adobe.com/creativecloud/desktop-app.html

  You can also see help document https://helpx.adobe.com/creative-cloud/help/manage-apps-services-desktop.html

  Hope this will help.

• I have a copy of photoshop cs2 (version 9) and I am not able to record by phone or the Internet.  Is there a number I can contact for this?

  I have a copy of photoshop 9 and I am not able to record by phone or the Internet.  Is there a number I can contact for this?

  CS2 disabling servers have been arrested, but a version of the program is available for users like you

  Read and follow the directions here:

  you will need to download the new cs2 version and used the serial number provided.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.