not appearing Bootcamp partition does not in El Capitan after upgrade

Similar Questions

• Bootcamp partition does not appear at startup

  Hello

  I'm on iMac 27 inches, end of 2013, and I have a problem. A week ago I tried to clean my mac and start from the beginning. Because my mac has been very slow. Then I do what it takes. So, apparently, I erased all macintosh hd and leave bootcamp partition. So I used for a while because I was tired. And yesterday I don't know what I have everything in the bootcamp partition and recovery of mac has just finished after 4 hours I was relaxing and wanted to extend my bootcamp partition. I don't know how, I deleted both the partition boot and forcefully repeat thing of recovery for 4-5 hours. So now I mavericks, disc bootcamp as not a partition and a very weak internet because of the recovery. And cannot choose the startup as a bootcamp drive or can't do anything for the bootcamp partition disk utility... Can you help me? I'm sorry if I could not tell you very clearly

  Off topic: should I upgrade to el capitan and yosemite? Or leave it as Mavericks?

  Thanks for your replies!

  Zeliha

  

  If I were you I would ask here https://discussions.apple.com/community/windows_software/boot_camp

  or try to get someone to move your message here

• can not detect the iphone after upgrading 12.5.1.21

  Set to update to the latest version of itunes (12.5.1.21) and now itunes does not detect my iphone.  tried to remove the lockdown folder. tried to restart all devices.

  Windows 10 with all updates installed. Someone at - it suggestions?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.5.1.21 to 12.4.3.1 or 12.4.2.4, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.

• Wireless button not work (orange rest) after upgradation from windows 8

  the orange wifi light does not change to white light after upgrade to windows 8 windows edition OS Home premium. I don't use the pavilion dv6-7011tx laptop, my product. is. B0P39PA #ACJ this is very frustrating as theres no wifi as well as bluetooth connectivity, the solution button wireless key doesn't help. HP guys please give a solution that we expect more than a month.

  If you open Device Manager (key Windows + X and select Device Manager) and see an unknown device with the following details as in the picture.  I had the same bad experience when I upgraded my Hp Envy17-3002ea loan last weekend.

  

  then download and install sp59720 should do the trick.

  Best regards

  ERICO

• PSC 2510i AIO: NOT more than scan after upgrade to Snow Leopard

  Hello

  After upgrading to Snow Leopard, I can't find my scan feature.

  I tried to different paths:

  1. install such as proposed through the Apple software update: no scanner not found, printing is working A-OK

  2. install HP_Installer_PSC2500_v9.7.dmg: does not work, gives errors.

  Removed all and re-installed the Apple / drivers HP through software update

  I've tested the HW, works fine, can sweep on the machine itself, but it is not a solution.

  I am enough fan of this machine, 100% over the years in the home network.

  Does anyone have a suggestion?

  Appreciate your help :-)

  Thank you!

  Hey the HP team.

  Just got an update of the printer HP by Apple and yes I can see the PSC2510i
  And Scan.

  It crashed a few times, but I guess that the reports will reach the development team.

  I am happy!
  I can disconnect and stop the Windows laptop...

  AND!  not even an additional feature!

  Multiples of scanning.
  It distinguises different objects, makes life much easier.

  Thanks again

  MacBurdy

• Drive external HARD with bootcamp partition, does not start?

  Hi all

  If I'm running into a bit of a problem. I had an older macbook pro (mid - 09), kept just upgraded HARD drive I had before I sold it. On this HARD drive, it has a partition Mac OS 10.8, and a boot camp windows partition 7. Now that I have my new Macbook Pro (mid-12), with an impressive but small SSD, I tried to start the windows partition via external enclosure. Im running in some points once I selected the bootcamp on the HARD drive partition. It tries to open windows, but I get the error "Windows failed to Start. Kind of stuck here, seeing that I won't try to Exchange hard disks for obvious reasons. Y at - there a fix, or any way around it?

  Windows 7 can not boot from an external device. Visit the Microsoft Windows features.

• Satellite 1800-400 does not start, or crashes after upgrading RAM

  I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

  When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

  I removed the new RAM and it works well again.

  What can be the problem:

  (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

  (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

  (3) is there any other problem that I don't have?

  TKS

  Hi Ricardo

  I agree with feliks.
  The module is not compatible and not taken in charge can be responsible for your problem.
  The best way is to use the Toshiba recommended of the memory modules.

• My iPhone that does not load Plus 6 after upgrading iOS 9.2

  Hi guys.

  I have a problem as the title. My iPhone that more than 6 can not load after update iOS 9.2. It works perfectly before. Is that what someone has experienced similar problem? How can I solve this problem?

  Thank you

  Doskey

  What do you mean by does not load? You don't see a loading progress bar?

  See: If you can not load your iPhone, iPad or iPod touch - Apple Support

• Does not display Image webcam after upgrade to XP PROFESSIONAL

  
  

  I called and spoke with the technical support of Lenovo. After the restoration of the original image of the XP Home Edition system, the camera still does not work and Lenovo technology composed in my computer to confirm that it is a faulty webcam. I'll post an update on my tech support experience in a short time (in the main forum).

  John in Indiana

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• Dell Dimension does not start in Vista after upgrade

  A friend had a Dell Dimension E521 that won't start - has the missing file system\hal.dll.

  As there was nothing on this computer, he needed, I rebuilt it install a new copy of Windows XP, used the upgrade disc closed for upgrade to Vista and ensured everything in its original package has been installed. Let him install the Windows updates at night and in the morning, after a reboot it indicated that there is an update available. I've updated that and restarted and he said there are only four more updates that memory on the video card. I've updated those, but now it does not start at the top.

  I'm going through the boot process, but as soon as it is the screen black with the Microsoft Corporation and the (green?) bar he starts moving forward a very small amount, and then restarts. It comes up with the selection of Windows startup screen and I tried the secure boot and last good Configuration known without result.

  I tried the original XP disc to do a repair, but this doesn't seem to work with Vista?

  How can I recover a work computer or do I have to reinstall again?

  Thanks for any help, that all the world can offer.

  If you have installed Windows Vista good the first time that the hard drive should be fine however I would suggest running the Dell diagnostics just to be safe. To do this follow the instructions on page 405 of this document and perform extensive tests.

  http://philipyip.files.WordPress.com/2013/02/Windows-reinstallation-guide-02-02-2013.PDF

  What video card you have? Have you tried to remove the video card and running using the onboard video? Have you installed Service Pack 1 before the system drivers?

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• Edge 15 does not start in Win10 after upgrade

  Updated 15 edge of Win8.1 to Win10 today. Everything was fine, then an installation file is stuck so I held the power button for a forced stop. When I turn on again, I get nothing, just a blank screen. (I couldn't even Lenovo logo) After an another power cycles, I saw a screen for "automatic repair", then he went and I'm still stuck on a white screen, noise from the hard drive, it is not read.

  I also tried to boot "Windows boot manager" and hard drive, both got white screen.

  Any help?

  P.s. I upgraded to Win10 once a factory reset to Win8.1, so I do a factory reset, but it seems impossible to get to the option more.

  Thanks for your help, I've actually made a diagnosis of HD and found too many errors, I'll replace the HD.

• E-mail still does not work on ZTE after upgrade

  I waited patiently the OS update, hoping that would solve my problem of e-mail. This isn't.

  Here is the configuration:

  I have an IMAP account with SSL from my hosting company. I manually entered the account information. The phone gladly accepts this information. The account is added. The Inbox shows up with correct messages. Then begins the problem:

  1. I type on a message.
  2. a new window will open and display the header information
  3. instead of the body of the message, I see that the loop of progress going on forever.

  Here's what I've done so far:

  1 soft reset
  2. hard reset.
  3. install the OS V 1.1
  4. check with my hosting company, they were very courteous and checked my email account. Nothing was wrong here and I can get my mail with my computer and iPad.

  What is going on? Am I the only one having this problem?

  Success! Thanks to expert advice from Andrew Sutherland to Bugzilla, my e-mail program works again.

  Andrew suggested that I look at my folder structure IMAP using openssl. It turned out that there was a strange trash that shouldn't have been there. Even more strange, it's Thunderbird on my Mac that created it.

  Once I deleted this file and set up Thunderbird correctly, I have reset the phone ZTE, removed, and then reinstalled the email account and things work fine now. Many thanks to the Andrew and support people who flew my bug to a solution