not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal

Similar Questions

• Can not go to the Internet by Local and Wireless LAN network

  I have a HP Pavilion dv6711TX laptop with Vista Home first. Everything works smooth and excellent for the year passes, however it could suddenly not going to the internet 3 days ago. In Device Manager, every material looks ok without problem and conflict. I tried to reset the router, laptop computer (disconnect the power supply and battery) reboot and tried to let Windows automatically diagnose and repair the problem, but so it does not solve the problem. He could find my wireless router and connected, but shows "undefined network." Is it a hardware problem or a software problem?  Help, please!

  Hi Peter,.

  Please use the forum for Support of Vista,

  Go to the HP website and download the updated driver for your wireless card.  Install the driver to see if it will help you solve the problem.  If it doesn't, use an ethernet cable and connect directly to the modem to see if your connection is always good.
  You can also search for known issues with your hardware from HP site.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not connect to the internet, even if my wireless router doesn't work and playing... See the description below.

  The following message has been provided during a diagnostic run:

  "The router/AP wireless for your network works, but your computer is not able to use an IP address to connect to the Internet.

  You will not be able to connect to the Internet, although you might be able to connect to your local network. Communicate with your network

  administrator or installer of router/access point wireless to help. »

  The client IP address = 192.168.1.101

  Gateway = 192.168.1.1 IP address

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  It will be useful.

• Connection to the internet using a Verizon Wireless router

  I have a Compaq Presario CQ60-210US running Vista 32-bit Service pk2 with an Atheros AR5007 802 Wireless card. 11b / g. I have problems to connect to the internet through a router with WPA-2 Verizon Wireless. I can connect to the wireless router, but it will not connect to the internet through it. I am able to connect wirelessly through other routers wireless without any problem. All solutions?

  Problem was with the wireless card Atheros who need an updated driver. Found a newer driver on a Czechoslovak website. Downloaded and intalled and solved the problem.

• 6500 a plus does not connect again wireless router

  I have a new wireless router. I can not connect with the 6500 has more via the WPS button or PIN. I also tried such and pass phrase nothing helps. I know wps works because she works with other devices. What that other router settings should I watch. ?

  I tried to change to the WPA + WPA2 WPA2 security. Same result.

  Print network test says everything is fine but no IP address.

  Try channel 1, with security.    If no go, change in the router in 'mixed' mode, 20 Mhz only.

• Services that can be disabled - Windows 7 stand-alone, single user of public access to the internet through AT & T wireless router.

  I'm trying to "understand :-)." "How to secure my laptop, a single user stand alone - not connected to any local network where obtaining internet access SECURE in my only goal.  I never SHARE with any other computer and want to disable ALL unnecessary services - what services can I disable in Windows 7 and with the Windows Firewall work with AT & T Internet Security Suite McAfee I entered and disabled all connections through the Windows Firewall to the internet PUBLIC - as I assume that the firewall 'rules' will block all malicious attacks - knowing that it is NEVER safe to assume something where I just enough conscience to accept the fact that I then know near NOTHING scares me.  Thanks - I'm trying to educate myself and the fear that Windows 7 will be obsolete before I have achieve this noble goal :-) - and then the nightmare should be repeated on a new version of Windows. Laughing out loud

  Hello

  I suggest you to visit these links for information on how to protect your computer.

  Consult the safety and Security Center Web site. You have a section to browse number that explains on the safety and security.

  http://www.Microsoft.com/security/default.aspx

  You can see the sections:
  http://www.Microsoft.com/security/PC-security/default.aspx#safety-products-and-scans

  http://www.Microsoft.com/security/online-privacy/default.aspx#passwords

  http://www.Microsoft.com/security/family-safety/default.aspx#overview

  http://www.Microsoft.com/security/resources/default.aspx#free-materials

  With regard to the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  http://TechNet.Microsoft.com/en-us/library/cc755604 (v = ws.10) .aspx

  Hope the information is useful.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• I can't connect to the internet on this laptop wireless

  Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• Vista PC is offline, unable to connect to the Internet by LAN or wireless.

  Original title: Vista (Japanese OS)

  My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

  I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
  How can I get the Fixit tool to work on the said pc?
  Help, please!

  Hello

  1. what Fixit tool you try to run?

  2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

  You can read the following article and check if it helps:

  Windows wireless and wired network connection problems

  You can also read the following article to change the display language:

  Change the display language

  You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

• Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  I recently installed an Epson L555 instead of my Epson L355, which worked well with my software windows 7 and my BACK program based. However, whenever the L555 turned the printer just keeps ejecting the hopper pages until it is empty. On the menu screen, it says "printing", but there is nothing in the print queue and I didn't send anything to be printed. Sometimes it reads "Fax set auto answer. By pressing the Stop/Reset button stops the ejection pages and "Cancel" is displayed on the screen. This continues for about 2-3 minutes, then the pages start ejected again. Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  Thanks for posting your query in the Microsoft community.

  I understand that print jobs are getting cancelled and I will be happy to answer your query. There could be several reasons for this cause and to diagnose the problem, initially, I ask you to refer to the suggestions in the article below and check.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Site Web Server not accessible via the internet

  Hello Apple community,

  I had a problem with the.app Web sites, where my site Internet (FQDN) is accessible via the network internal, but not accessible through the internet. I have port ports 80 and 443 passed on my firewall and I can see the ports open via nmap on an external connection.

  When I browse the site via http, I get redirect to 443 then it just resets and I get no error page. Internally, the page redirects to 443 and loads fine with the popup of trust initial cert (self-signed cert) that I then store to my keychain and loading the page well. I get no this pop up via an external network.

  Accessibility is accessible by 80 (green circle icon) but not of 443 for reasons I can't understand.

  I already tried to remedy the situation of the measures:

  Create a new self-signed cert to use. (same results)

  Disable ssl and disable redirection. (causes a load error in the browser)

  Wiped the OS reinstall OS X El Capitan and.app. (same results)

  Checked the port forwarding on my firewall Meraki 15 times (looks good)

  Disabled the feature IPS of the PPE on the Meraki (same results)

  Maybe I'm just on something? I hope someone out there can help.

  Thank you!

  Well, thought about it. < bangs head >.

  ATT Uverse uses port 443 for flow towards Wireless HD receivers in the House. There is a way to change the port it uses, and I'll try and do it later and post my results in case someone else is having the same problems.

  Thinks... "Why the hell ATT would use a common port for Wireless HD? SMH.

• Can not go on the internet when everything seems to be OK.

  It is a mini Ipad. Was on the internet for a long time, then suddenly will not go on the internet. Everything seems to be correct. The checkbox to the left of the network and internet icon appears to the right of the network, but it will not go on the internet.

  Settings - WiFi - < name of your wifi > - click on the i - if the IP address starts with 169 - then you may restart your router

  Other tips-

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Please see recommended settings of WiFi routers and Apple access points
  4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
  6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
  10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• Cannot check the Internet using my WRT54G2 V1 router.

  I have Blue Ridge cable Internet.

  I can connect to the internet perfectly by directly connecting the cord to this laptop that I am.

  I ran the CD for my WRT54G2 V1 router, and at the end of the installation it says my router is configured, but he said that it was not connected to the internet.

  I tried several times to fix this in troubleshooting, but none of them worked.

  I DID however just simply disconnect and reconnect the router after about 10 attempts and I've been on the internet for about 20 seconds. (I looked for something on google and found research.) But internet is turned off and it just says "Local".

  I want to connect to the internet using this router and thus be able to connect the members of my family with their laptops through this router.

  Thank you.

  Configure your router for Internet connection

  CLICK HERE for instructions

  To configure a router Linksys with cable Internet Service

  Make sure you follow the mac cloning procedure because it is the key