Not detected in satellite pro 6000 integrated wireless card

Similar Questions

• Satellite Pro 6000 - pc wireless card only works in one slot

  Hello

  I have a problem with my wireless pc card.
  It works in a slot, but when plugged in the other it gets stuck on acquiring network address.
  Is it possible to fix it, or are the two different ports.

  Hey Buddy,

  According to the manual the two slots is normal PC card connectors so that the WLAN card should run in both slots.

  But why is it so important that map PC works in both slots?
  You have another PC card that you can test in the second slot?

  What operating system you are using and what WLAN card is it exactly?

• Signal not detected on Satellite Pro 6100 wireless

  I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
  A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

  I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

  His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

  I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
  Suggestions how to trouble shoot and fix this?

  Both machines are XP Pro on them, latest updates.

  Hello

  Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

  Check if the wireless adapter is listed in the Device Manager and recognized correctly.

• Satellite Pro 420CDT: What wireless card might be compatible?

  Hello

  I have an old 420CDT Satellite Pro and I am trying to get a wifi card to work with it. Can anyone recommend one? I'm using Windows 98.

  Riaz

  Hello!

  Yes, I think that all wireless with drivers Windows 98 PCMCIA cards would be OK, perhaps that some of them are for max. 11 Mbps transfer speed only...

  Best regards

  Pete v.

• Hard drive not detected on Satellite Pro 4270

  I took out the 2 "5 HDD of my SP4270 to transfer data to my PC via an EIDE 5 3" 5-2"adapter, HD has been detected by the bios of my PC and the transfer was successful.
  Then I reinserted the Bay 2 "5 for laptop from my hard drive, but I get the message"Insert system disk in drive.".
  I checked the boot priority in the setup and it shows a HDD-> CD-> sequence FDD.
  In the DISKS to bios section, I see HDD = IDE (1F0H/IRQ14) primary.

  I extracted and reinsert the disc again, hard, but without result.
  What could be the problem?

  Hello

  It is not easy to say what is happening here. Please when you pull it out HARD drive remove the connection of the power supply and the battery first.

  Check all the pins on the HARD drive. I hope they are all okay.
  Try to enter the HARD disk using the disk boot or applications in MS-DOS mode. If there is no success there is a hardware problem.

• Keyboard does not work properly (Satellite Pro 6000)

  Hello
  I have a problem with my SP6000 keyboard: when I press '3' I get '93 "; "d" ==> ".d"; « e » ==> « oe ». When I hold '3' I get a.s.o. "93333333333333333" I have already changed the keyboard, without success.

  I have this problem with XP, Knoppix and BACK.

  Brgds and thanks for the replies.
  Tom of Hamburg

  Hello

  updated BIOS yet? You did it as an update of the EC/KBC?

  Do you have the new keyboard connected right?

  Pete Bye

• Satellite Pro 2100: PCI Wireless card

  Install a PCI card Broadcom wireless and need to know where the overhead wires are routed (screen or base) so that I can try and extend one is short of 1 cm-oh and make black and white colors correspond to large and in the?

  Hello

  As far as I know white cable goes to the ESSENTIAL and a black to the power supply if you need some specifications or documents on how to disassemble the device it can be a problem because it's not in public.

• Satellite Pro 4600: WiFi / Wireless Card [built-in]

  Hello

  I've got some hard get my WiFi integrated to work. I can't seem to find a driver for it anywhere (to install even the damn thing) and I can't seem to find anywhere in the BIOS that will allow me to "enable" it.

  I spent it to 'On' but still no luck. Could someone help?

  Thanks in advance,
  Mike

  Hello

  I assume that the laptop has been delivered without any WiFi card and you have installed the minPCI wireless network card. Am I wrong?
  Well, first of all, how did you install the wireless network adapter?
  As far as I know there are Brown and white 2 cables. The white goes to the hand and Brown to auxiliary voltage
  Then Device Manager should recognize the device is an additional device. I put t know what WLan card you use, but the drivers compatible, you should find on the Wlan card manufacturers website.

  On the left side for laptop, you'll find a Wlan antenna switch. This switch must be turned on (LIT) If you want to use the Wlan

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Satellite Pro 6000 - new RAM does not work

  Hi all

  New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

  I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

  I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
  Any help would be thank Lindsey

  I think that the new RAM is not compatible with the motherboard or laptop.

  The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

  By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

  The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

• Satellite Pro 6000: display or graphics card problem

  Hello
  I don't have a model satellite pro 6000. PS600E-01NYE-FR
  1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

  I understand that it is an old laptop but had been treated with great care because I got it.
  My problem is the following;

  Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
  a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
  but nothing is readable, at all.

  I tried to run a yellow one also using the video output external monitor, all appear the same.
  a computer display (although I can't check it out) to freeze.

  I replaced the heatsink fan as a precaution (using the new dough)
  the only solution I can find is replaced the ram with
  2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

  Thanks in advance
  Display Toshiba SP6000 (?) Problem

  I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

• Satellite Pro L40 - failure wireless, how to diagnose a problem?

  Not now my Satellite Pro L40 will detect wireless networks, and the light does not illuminate when the switch is triggered.

  How can I know what is the problem?
  see you soon
  Mark

  I'm afraid that the WLAN adapter is not correctly enabled.
  Please put the WLAN to position on and after making this combination of keys using FNF8 and enable the wireless network adapter.

  Card WLAN registered and installed properly in Device Manager?

• Satellite Pro 6000: can't find the right WLAN driver

  Hello
  I have re-installed Windows Xp on my laptop Satellite Pro 6000. Everything works except for the wireless connectivity.
  When we look in the Device Manager, I see that the WLAN driver has not (or wrong) was installed.
  Then looked at the Toshiba site for the drivers, but I am not able to find the right one. I found some drivers, which seems to be the one, but unfortunately after installing the drivers, wireless connectivity is still not available.
  Any help would be appreciated.

  Thanks in advance.
  Best regards, Robert

  Hi Robert

  Stand by! Connectivity is not available or the WLAN card is still not installed correctly in the Device Manager list?

• Unable to connect satellite Pro 6000 network

  I would appreciate help on this. We have a Toshiba Satellite Pro 6000, which we assumed is active wireless. But when you turn on the wireless switch, there is no answer and the laptop will not come to look for me or any other network.

  I was able to connect using a USB wireless adapter, but it seems a shame not to use the capacity of the machine itself. Any suggestions? And I'm just thinking wireless is standard with this model. If not what can I do about it?

  Hello

  Please check in Device Manager if the WLAN card is listed under network adapters. As far as I know the WLAN card for this camera is optional and it is not standard.

• Satellite Pro 6000: What WLAn Module?

  Hello
  Anyone know which Module WLAn can be used in a Satellite Pro 6000.
  My NB is pre-installed for WLan but I don't want to use only 11MBit Module and the other are not signed for the SP6000.
  Can I use this module to 54 megabits?
  Thank you
  Daishi

  Hello

  As far as I know this unit supports only the 802. 11b Wireless LAN Mini PCI Card.
  This Mini PCI card, I got with a flow of data 11Mbit.
  In this case, I think that you can use a Mini PCI card with 11Mbit.
  But nevertheless you ca also use a PCMCIA wireless card. This card is also available with 54 Mbps data rate.

  Good bye