Not detected IR receiver

Similar Questions

• Media Center TV error: not detected IR receiver.

  I plugged properly the IR cable (and the "pouf"), but I can't turn my TV through Media Center.  I keep getting the error message: IR hardware not detected.     It worked fine until I had to have a new hard drive installed, with media Center - the XP version - need to be resettled.

  • ... My fact computer receive TV (via S-video) signal.
  • And I am convinced that I have the IR cable is connected directly over signage to distance from the box by satellite.
  • My IR equipment was purchased with my computer, via the gateway.  The IR has a name brand on the back, called "SMK".
  I honestly don't care even if the remote control work-I just want to be able to watch (and record) the TV via my computer.   - But I can't complete the configuration of the TV, it me stops with this error message every time.

  Help someone?  Please?

  Thanks for the ideas.  In the meantime, I found a way around, by attaching listeners both ports the pouf - and through various tests, I managed to fool my computer allowing me to configure the TV manually, at least partially.  It is not completely functional - that I can't control my receiver via my computer... but I never able to do this, even if my computer has been directly from the factory.  (and Yes, I have the little 'eye' attached directly above 'eye' on my receiver).  ... At this point, I was kinda afraid to throw my current settings.  But I'll keep your suggestions in case I have have other difficulties or be too frustrated with my set-up.

  Thanks much for the thoughts!

• Internal microphone is not working, receiving the message: sound card is not detected.

  Original title: my internal MIC does not work...

  .. I get a message saying that my sound card is not detected... all of a sudden...

  Is - fixable without buying anything?

  Hello

  What is the brand and model of the computer?

  I suggest you follow these methods and check.

  Method 1: Refer to this link and check if it helps.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  If the method above does not work, proceed to the next method.

  Method 2: Try to update the audio driver and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Error 512 - fan chassis rear not detected

  Hello

  Just unpacked my birthday gift today... a brand new and shiny, HP Pavilion HPE-595uk (yay!).  My husband purchased directly from HP, about 3 weeks ago.  It has been used until today.  (Happy birthday, me!)

  However, on first switching on, I received a message from bios:-"512 - undetected, rear chassis fan error press F1 to continue"

  I pressed F1 and start continued, Windows 7 is installed, everything seems ok... I'm talking about (entered) to you on the PC right now.  However... If I have to powercycle the PC, I get the error (error 512 - rear, chassis fan not detected, press F1) every time.

  That means there is a problem with this PC? The rear chassis fan should be detected?  If a cable is loose?  All new PC remember... just out the box 2 hours.

  Thanks for the inforfmation.  I just started my new computer that has the message 'Error 512 - rear chassis fan not detected'.  Rear fan connector had a bent pin and the connector has been sitting on it.  Pushing the stem with long nose pliers and a small screwdriver it fixed and enabled the connector to connect all the way and everything is fine.  Be sure to remove the power cord from the back before you do.  I did not, and the button was hit during the removal of the side panel.  Since I was a SDS I heard the computer turn on - I was lucky is not to run out of something!

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• Tecra Z50 - C - 12F M.2 SSD replacement not detected

  Hi all

  I just received a new Z50-C-12F and wanted to replace the 256GB SSD with a more wholesale (Samsung 950 Pro 512 GB m2)

  Unfortunately, the new SSD is not detected at startup, but I don't understand why.
  The original SSD is a Samsung MZ-NTY2560 (B & M-button) a new is a key of M, but this is the connector to the laptop.

  I tried to adjust the UEFI to MSC (default is UEFI (Legacy)) in the BIOS but even boot from a DVD of magic parted shows no signs of new SSD.

  TIA,

  Steve

  I tried a second new m2 (Samsung 950 Pro 512 GB m2) and still no sign of recognition.

  Any thoughts?

  Steve

• Windows 7 Pro x 64 does not detect HP Mobile Data Protection Sensor (accelerometer)

  Hello.

  I installed win7pro x 64 yesterday and already fallen on a serious problem, which is how I use the laptop a little dangerous for my valuable data.

  When I was working on HP Vista 32 bit (of the partition recovery etc.) brand, it was a device called the HP Mobile Data Protection with HP ProtectSmart software sensor (or protect Smart). In other words, the accelerometer HDD which parks the HARD drive heads when it "feels" it is down or something and the software for it. It has worked flawlessly.

  
  

  Until I decided to install Win7... And then, surprisingly, after failure of driver install and take a look in the Device Manager, I have noticed that there is no such device. I checked three times, looked at property of each device, even reinstalled Vista 32bits back - he has shown again - and installed Win7 - not detected again. There is nothing that has the HPQ004 device ID! I remember people saying that after that fresh Windows installed, there are 6 unknown devices or more. I got only 5. [Device fingerprinting, 3 x MemCard player and IR receiver]. There is no accelerometer... Also, when I try to install the drivers/software, windows appears:

  ProtectSmart Hard Drive Protection: with the text Property.AccelerometerNotPresent

  and then another saying something like features were not installed due to wrong installation or not supported feature.

  So now I'm stuck with a laptop it is dangerous to travel with, because the disk is no longer protected

  I have already installed all the drivers available on the HP page, even downloaded those newer Intel (chipset) etc.

  Is there a solution to this? Has anyone else encountered this problem?

  Windows 7 is officially released and available in RTM version, not beta, so I think that HP should open support in his favor and release new drivers for win7! And above all, to solve this problem...

  If anyone is interested, this problem is solved now.

  Just download the new drivers from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3744188 & swItem = ob-76187-1 & mode = 4 & idx = 2, install and make sure you have the latest version of the BIOS. Tested - heads are being finally parked! Yay!

• Not detected in satellite pro 6000 integrated wireless card

  Hello

  my company has two satellite pro 6000 with wifi built-in.
  I'm sure that when we have received laptops led wifi turn properly when the wifi switch is activated.
  Since we had no wifi, never bothered us check.
  Now, it seems that the card is not detected, it does not appear in Device Manager.
  Runing xp SP2.

  Fred

  Hi Fred

  Y at - it the same problem with two laptops?

  Have you tried to start the Hardware Wizard? If the card is there it will be shown, and if the card will not be detected that it is possible that this card has been removed.

  Check it out.

• Re: Satellite L645 - peripheral Bluetooth not detected

  Hey, prior to that, I can use my bluetooth anytime, anywhere... but last night, I tried to receive an item from my phone, and it seems that my bluetooth device does not.

  I am looking in my cell phone, and bluetooth bluetooth Manager setting and etc are still there. When I click on Bluetooth, not had a response Manager. but in my task manager, the program works very well... I try to find FN + F8, my bluetooth is turned on. so, I tried to re - install back than my bluetooth stack, but the same problem occur... I tried to use other bluetooth software, but during the installation, he said that "no bluetooth device not detected"... so how to solve this problem? Transfer that my bluetooth works fine... Please help me... =)

  Hey,.

  What model Satellite L645 you have exactly?

  Not all L645 models have Bluetooth module

• "Print cartridge missing or not detected" says my Photosmart C4250 of HP all-in-One error

  My all-in-one HP Photosmart C4250 error is 5 years old.

  This week, he stopped printing with a message saying that it could not detect the ink cartridge.  The cartridge was low, but non-empty, so I asked a geek friend to take a look but no problem was found.  Today, I just bought and installed a new cartridge.  Still will not work.

  This printer has been reliable so far.  Any ideas?  I am unemployed and a new printer is certainly NOT in my future.

  Thank you!

  Here a link to a document that addresses the error message that you receive on this printer model. It will provide a troubleshooting to try in an attempt to clear the error message. If we filled all solutions in the document and continue to receive the error message, would seek to substitute.
  
  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• New PA3533U-1 b RS/AS for Satellite A300D battery is not detected

  I recently had a new battery PA3533U-1B SR / regarding my age Satellite a 300 d.
  When I put the new battery in the laptop, unplugged computer, press the power button, the Red battery light blinks several times, no power.

  When I plug the power to the laptop, the red light on the battery remains red as-if the load, once windows has loaded the battery shows as not detected.

  I kept the battery charge during 12 hours +, both the 2nd and 3rd battery I received, and none of them show only detected.
  When the laptop is off, new battery, ca, red light stays on for about an hour then it continually flashes. This occurs at the same time. After loading it lights up to insert ac, then when windows loading, undetected bat.
  When I put my original battery in turns without ac and battery and correct information shows.

  I returned the 1st battery, once I reported a 2nd defective, he sent me a 3rd. The dealer has a very positive feedback and good comment, I recently received an email from the merchant who quote
  "There could be a problem with the system, as one you returned to us work perfectly well."

  I have a good loyal battery which lasts 20 minutes, which recognizes at all times and costs without problem.
  If you could please help it would actually prevent me from going crazy, thanks in advance :)

  Are these batteries original battery Toshiba Toshiba name on the label of the battery?
  Start your laptop without battery power only, and when the windows are fully charged the battery in place. Battery is correctly recognized?

• Vodacom k3772-Z not detected on Satellite L755 USB 3.0 port

  Good day to all,

  I kinda a strange problem, the company that I work received point on the toshiba Satellite L755 PSK2YE and a box of vodacom K3772-Z modems for distribution to our customers.

  We picked up that these modems are not detected at all when plugged in the port of USB3 laptops left side (we tried 3 modems on machine Ong 3 with the same result each time)

  Modems work perfectly well when it is connected to the usb ports on right 2 and all the rest that we connected to works of 3 usb port very well including older models of modems.

  I also tested the modem on another machine of 3 USB (also using the usb controller 3 renesas) and it works beautifully.

  I have notcied that if you disable the usb controller 3 on the laptop and turn it back on with the stick of 3 g connected to the unit is detected correctly however if you unplug in and try again once it does detect it yet.

  It's using the latest drivers and firmware.

  I tried to find a solution online but had no chance.

  Any ideas what could be the cause?

  > Modems work perfectly well when it is connected to the usb ports on right 2 and all the rest that we connected to works of 3 usb port very well including older models of modems.

  From my point of view it would mean for computer laptop USB 3.0 port works correctly and, possibly, there is a compatibility problem between the modem and the USB 3.0 port. Maybe you should contact check the modem manufacturer support page for more information

  I read on some forums that many people had problems to install this modem using Win 7 64 bit with 32-bit system was not a problem, someone used the drivers released for modem K4505.

  Someone else solved this facility a 10.2 Vodafone
  + 1. Go to start menu.
  + 2. Run regedit +.
  + 3. Open this key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E96D-E325-11CE-BFC1-08002BE10318} +.
  + 4. In this key, search for the string of Installer32. +
  + 5. If missing the Microsoft registration key, the key must be added manually. +
  + 6. Create a string value named Installer32 and assign the mdminst.dll, ClassInstall32 +.
  + 5. Save the regedit +.
  + 6. Open the device manage +.
  + 7. Find the modem with the problem; uninstall it and let windows detect it again (or search the hardware changes). +

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• Qosmio G40 - infrared chipset not detected by Windows 7

  I upgraded to Windows 7 from Vista and found that my infrared chipset (SMSC SIO1049 SuperIO chip) does not appear in Device Manager.
  According to this page, it should appear as an unknown driver (ACPI\SMCB0C0)
  http://msdn.Microsoft.com/en-us/library/dd567986.aspx

  The IR remote control provided by Toshiba does not work (it used to work fine under Vista). All the world had the same problem B4? How to fix you (if you resolved at all)?

  Does this mean that Ineed to wait for the next update of the BIOS (my BIOS version is 2.20)?

  My computer is a Qosmio G40 PQG40 02201NCE.

  Hello

  If the device is not visible in the Device Manager, not even as an unknown device, then this means that the device does not exist or was not detected by the BIOS.

  Usually, the infrared receiver must be visible in the Device Manager under:
  Human interface devices - > infrared receiver SMSCIR

  In system devices, you should see the device consumer infrared.

  Don't forget that you have enabled devices hidden sow option perhaps of Device Manager, then you might see this

  Please also check the BIOS
  I'm not very well if the infrared device option would be listed in the BIOS, but you should check it m

• A6210 not detected and no led light

  Hello! I have a problem with my adapter wifi and id as a solution, basically when I got my netgear upgrade wasn't my thing more it was not detected, I tried on my brothers computer and also, it did not work. I don't know if it's the software or the hardware. I use windows 10 and I got the update I received today

  I tried it, and it has not worked in his computer also.

  but I already have the solution, looks like it does not work om windows more recent 10 updated so I have u installed this update and I go back to earlier versions of windows 10 and it works perfectly.