not enough memory to complete the operation

I looked in the forums for "memory to complete operation" error and despite the advice that I found, the error always happens.

I'm using LabVIEW 2012 to try to constantly monitor our system, recording temperature, power, etc. vs time (values obtained by acquisition of data USB-6008).  The data being saved to file, is every 60 seconds using a small table (no problem here).  Allocation of memory time/sleeves typical LabVIEW is about 180 MB (4 GB of RAM on computer).

The issue that I feel is related to our wish to display these data on a chart for long periods of time.  The current iteration of the code works as follows.

(1) we have 2 XY charts with 2 slots of each.

(2) for each parcel, I'm initialization of clusters of berries of 2 100 000 (XY pairs) that are related to the shift registers.  I know it's bigger that can be displayed on a chart, but I am currently more concerned with reducing the number of data copies.

(3) every 10th data point is added in the tables using one up Bundle/Unbundle element with a 'subset of table replace. "  In other words, there are about 8640 points per day. (One day is the shortest duration usually read)

(4) for the two traces on a XY Chart, two groups are combined in a table (using the table to build).  I think that's my problem here.  Since every time I update the charts that LabVIEW must allocate memory for the 4 XY plots. (I'm correct here?)

Decimating the additional data during research on several days will reduce the amount written in the plots.  However, this creates copies of data.  It is useful in this case?

Instead of initializing 4 groups (1 for each plot) and combining in the tables later, it would be better to initialize the array of clusters of berries (2 lots per chart) and update the data by "index / unbundle / replace the subset of table / bundle replace table subset" series of operations?

Nothing obviously bad jumps to my, but this could be why it works for days sometimes.  A few things to try:

(1) the section where you overwrite the oldest 3600 data points and rotate tables has code to initialize a new table.  I propose this initialization outside the loop to make sure that only do you it once.  You could always simply replace the elements in the table with a value of NaN.

(2) I would try to get rid of the build tables as you pointed out.  Initialize these berries outside the loop and replace components as appropriate.

(3) build you tables of Irr and time according to the table of the construction and reset them once / day.  You can try those external booting as well.

(4) If a problem occurs and the file write crashes your queue can fill.  The dequeue item is already waiting for data before it does anything, so I don't think you need the delay in the same loop.  This could help the dequeue catch up if the queue is large.  You can use a vi Get Queue Status to display the number of items in the queue on the screen.  As long as it is not hidden by the error message it could give you an idea if the queue is the cause of your error.  You can also access the queue size to see if it develops.

(5) If your data acquisition loop error handling is not good, a mistake it can cause the loop to run as fast as possible.  If you have added the 1000ms wait just to show that this is not a gourmet loop, so this could easily be the cause.  I do not think that the Renault USB are very reliable, so try to use a days may run into this error.

I hope that it becomes at least you said in the right direction.  My bet is on #5

Tags: NI Software

Similar Questions

  • "not enough memory to complete the operation" when you try to update the USB mouse driver in Windows 7

    USB mouse does not work. Driver must be installed. When trying to update driver get error message "not enough memory for operation of somplete.

    Hello

    1. What is the brand and model of the mouse?
    2. don't you get the same error message when you connect the mouse to a different USB port?

    I suggest you try the steps from the following link:

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-driver-problems

    See also the link:  Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

    We know if you need help. We will be happy to help you.

  • "Not enough space to complete the operation"

    Hello

    I use
    Windows Vista Edition Home Premium
    32 bit
    Service Pack 2
    Compaq :D

    When I started my computer. I noticed that the volume icon had a small red cross. And the network thing too. So when I right click on the volume bar. It has 3 options: playback devices, recorders and sounds. When you hold your mouse on the icon it says "Audio Service has not started". When you place your mouse over the network icon it will say "not enough memory to complete the operation.

    When I go to services, I see that Windows Audio is not enabled. When I click right properties. He said its on automatic. That when I press start, it also says: "not enough memory to complete the operation".

    When I check the system.
    It says CPU: not available
    RAM: Not available
    Usually, he'd RAM: 2.00 GB (or something like that, but I'm sure it was 2 GB)

    For any help or suggestion would be nice. I searched a lot on Google but couldn't find answers that work.

    Thank you
    Daoping (not my real name)

    Thanks for the reply anyway but,

    Until I received this message. I reformatted my computer.

    Thank you.

  • Not enough memory to complete this operation.

    I had a glance through the assignments to the title of this topic and no solution to the error that I am experiencing.

    My LabVIEW application runs on a windows 7 PC and receives messages from an application running on tha RT PC LabVIEW TCP/IP.  These messages from 4 k to 7 k bytes in length and reception are queued in the comms TCP/IP thread and removed and converted to the appropriate data type for display on the front panel in another thread (design of producer/consumer).

    After running for between 1 and 24 hours, one or more "not enough memory to complete this operation.' dialog boxes are displayed.  This interrupts the execution of the application, but these closing dialog boxes allows the application to continue running.  What I find strange is that if there is not enough available memory how is possible for the application to continue running. Windows resource monitor display shows that there is always some 1.1 GB available.  Also, what is strange is that there no noticeable change in memory is committed to my application.  I expect that if I had a memory leak which committed memory would slowly creep upward. If I need extra RAM in this PC or adding RAM will increase just enough time between errors?

    My system specs are as follows:

    Dell Optiplex XE Intel Core 2 Duo CPU 3 GHz / 2 GB RAM running Windows 7 Professional 32-bit

    LabVIEW 2010 SP1

    Any help would be appreciated.

    Kind regards

    Rob

    Dear Rob,

    Same problem, I was faced with one of my applications.

    Give some delay in your writing RT TCP loop. RAM is fine no problem with your RAM. If you connect to your data file, you found after some time, you get some unwanted characters on the TCP/IP Protocol these unwanted characters increase your data to read size. So to avoid this gives some delay in your cRIO TCP send loop.

  • Not enough memory to perform the operation

    Hello

    I tried to run the code below, but still I get the error "not enough memory to perform."

    I don't know why is so? Its simple operation that I am doing...

    Thank you very much...

    This is what you need:

    Note that may throw you / add 'steps' caused by the type of double cast in full.

    Another note: in light of your departure and the timeout value and the Delta_f, you will get 10495 steps. This seems quite high. For?

    Norbert

  • Not enough memory to process this operation issue in Windows 7 when you try to install a game

    Hello Mr. I m Germain Babu. I have a problem installing. Whenever I have install it says "not enough memory to process this operation." I tried to change the IRPstackSize also I put t have any prog running at the back. Also, I deleted all temporary files from the My. Yet, persists.also problems I use windows 7 Home premium with 4 GB of ram and processor i5. Reference the Dell manufacturer. I have also 1 GB graphics card. I also have more then 10 GB empty in all local drives. . Can you pls will bring a solution to this problem.

    Very strange.

    Your best bet is to contact the game-maker support forums and ask there. The should have encountered these problems quite often in the past three years :)

  • Get when the "not enough memory to process the command' install a new version of the Windows Installer.

    Original title: However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my drive C. help!

    In response to an error 80070641 during installation of updates, I uninstalled Windows Installer with the intention to download the updated version and install my updates failed.
    However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my C drive.
    Help!

    Hi Derek,.

    Please report the problem to Microsoft Community.

    According to the description, it looks like you get the error when installing a new installer as ' not enough memory to process the order'.

    I have a couple of steps that should help you with this problem.

    Method 1:

    Try these steps and check:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    a. Click Start > run > type regedit and press enter
    b. find the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
    c. find IRPStackSize
    (d) If this value is not right click on key settings and click on new > Dword value and type IRPStackSize under the name.
    e. right click on IRPStackSize and click change
    f. Select decimal , enter a value greater than 15(maximum is 50 decimal), then click on OK.
    g. close the registry editor and restart your computer.

    Method 2:

    Try the steps mentioned in this link and check.

    Not enough memory is available to process this command.

    User action:

    Do one of the following, and then retry the command:

    a. reduce the number of running programs.

    b. remove unwanted files from the disk, the pagefile is on and restart the system.

    c. check the disk paging file for an IO error.

    d. install more memory in the computer.

    Visit the site and check:

    http://TechNet.Microsoft.com/en-us/library/cc978735.aspx

    Method 3:

    I suggest you to clear temporary folders and check if it helps, here are the steps:

    a. click Start, type folder in the search box and press enter.

    b. press the CTRL + A, that will select all the content and Remove it.

    Once you disable this, follow these steps:

    a. click Start, type Temp folder in the start search box and press ENTER.

    b. press the CTRL + A, that will select all the content and Remove it.

    I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

  • ESX 3.5.0 317866 there are not enough licenses to perform the operation

    Hello!

    We have not changed anything in our virtual environment for 2 months. And now when I tried to turn on a virtual machine, I got the error

    "There are not enough licenses to perform the operation.

    As I understand it, there was a bug in some versions that should be fixed now.

    Under the configuration of hosts and licensee I have ESX Server edition as unlicensed.

    Then I click on edit and choose ESX Server Standard and click OK.

    But the ESX Server edition remains as unlicensed.

    In the VMware license server tools, everything seems fine. (As far as I see)

    Below, you have the status of License Manager

    Retrieves all the steps in this article and everything seems to be in order

    Ko. VMware.com/kb/7114568

    It simply doesn't get it.

    Rasmus

    --------
    Status
    --------
    Status of flexible licensing on Thursday, February 24, 2011 16:11

    [Detection processes lmgrd...]
    The license server status: 27000@vc
    File (s) on vc of license: license VMware C:\Program Server\Licenses\converter.lic:C:\Program license Server\Licenses\esx1_xx_xx.lic:C:\Program license Server\Licenses\esx2_xx_xx.lic:C:\Program license Server\Licenses\vc_xx_xx.lic:C:\Program license Server\Licenses\vmware.lic VMware VMware VMware VMware:

    VC: license server UP (MASTER) v10.8

    Demon provider (on vc) status:

    VMWARELM: UP v10.8
    Info according to its use:

    Users of P2V_ENTERPRISE: (Uncounted, node Lock)

    Users of PROD_ESX_FULL: (Total of 4 licences;  Total of 0 licenses in use)

    Users of ESX_FULL_BACKUP: (Total of 4 licences;  Total of 0 licenses in use)

    Users of VC_ESXHOST: (Total of 4 licences;  In total, 4 licenses in use)

    V2005.05 "VC_ESXHOST", the name of the seller: VMWARELM
    floating license

    Vc vc (v2005.05) (vc/27000 801) SYSTEM, start game 2/24 14:57, 2 licenses
    Vc vc (v2005.05) (vc/27000 102) SYSTEM, start game 2/24 14:57, 2 licenses

    Users of VC_VMOTION: (Total of 4 licences;  In total, 4 licenses in use)

    V2005.05 "VC_VMOTION", the name of the seller: VMWARELM
    floating license

    Vc vc (v2005.05) (vc/27000 901) SYSTEM, start game 2/24 14:57, 2 licenses
    Vc vc (v2005.05) (vc/27000 702) SYSTEM, start game 2/24 14:57, 2 licenses

    Users of VC_DAS: (Total of 4 licences;  In total, 4 licenses in use)

    V2005.05 "VC_DAS", the name of the seller: VMWARELM
    floating license

    Vc vc (v2005.05) (vc/27000 302) SYSTEM, start game 2/24 14:57, 2 licenses
    Vc vc (v2005.05) (vc/27000 202) SYSTEM, start game 2/24 14:57, 2 licenses

    Users of VC_DRS: (Total of 4 licences;  In total, 4 licenses in use)

    V2005.05 "VC_DRS", the name of the seller: VMWARELM
    floating license

    Vc vc (v2005.05) (vc/27000 402) SYSTEM, start game 2/24 14:57, 2 licenses
    Vc vc (v2005.05) (vc/27000 502) SYSTEM, start game 2/24 14:57, 2 licenses

    Users of PROD_VC: (Total of 1 permit;  In total, 1 license in use)

    V2005.05 "PROD_VC", the name of the seller: VMWARELM
    floating license

    Vc vc (v2005.05) (vc/27000 602) SYSTEM, start game 2/24 14:57

    Users of _PING_SERVER_: (Total of 1 permit;  Total of 0 licenses in use)

    You probably already checked this, but make sure that where it shows the license server in the CR, it says "not found".  If so, modify, change anything, OK.  And he can then reconnect.  This happens a lot in one of our branches in bad bandwidth.

  • "Not enough memory to run the Titanic"

    Basically I'm playing an old game of Windows 95, Titanic and I changed the compatibility, but now it says that I don't have enough memory to run it. I deleted some programs, done the cleaning disc too. I have not any open programs. It is said to the press compact to compact memory but when I do nothing happens...

    Ive just run a google search and some say that they got it running in W7 by playing with the compatibility settings, esp the resolution of the screen (640) and 256 colors, as well as disabled themes. Others say that he needs all o parameters. Have you tried all these various combinations.

    Another site said he needed W95 compatibility mode, and another said that it works under XP SP3.

    Not sure why there is so much to mix and match however?

    Try the first three parameters (res/color/themes) W7, that fails try under W95 (compat) and XP - SP3. If this fails, try all 5 with the same combinations.

    If you have an older Windows 95 operating system (or maybe an old W98) or even XP if you know runs in that, then you can be able to run the game in one of the free programs "virtual machines", i.e. of W95 running in a virtual machine actually running in W7. Something like http://www.vmware.com/products/player/faqs.html or http://www.virtualbox.org/ perhaps (good read) but you will need a valid MS OS W95/98 to install in the virtual machine.

    It comes BACK http://en.wikipedia.org/wiki/DOS Windows 95 sort of 'sat' on a subset of BACK as I can remember, like W98, and to a lesser extent WME. Some of the older games initially ran in the BACK. I had a game installed in Windows 95, but I had to boot into DOS mode to actually complete.

  • Satellite P100-347 does not hibernate - not enough resources to complete the API

    When I close the lid on my P100-347 and she is programmed to Hibernate, it is not, but gives me "insufficient resources to complete the API. very irritating

    Hello

    I found this Toshiba document:
    Computer laptop doesn t Hibernate - "Exist of system resources to complete the API error message occurs.
    http://support.toshiba-tro.de/KB0/FAQ6201CE000SR01.htm

    It seems you must contact Microsoft Support to obtain a fix.

    Maybe this update update will allow:
    http://support.Microsoft.com/kb/909095

    guys good luck

  • sound recorder, no not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.

    I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do

    Hi superconfused123,

    This problem occurs because of a design limitation in the tape recorder.

    You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • record to the DSP not enough memory

    Hello illustrators

    Im trying to save as a psd file from illustrator to imoprt it in photshop and go from there

    I did over 100 layers and when I try to record as keep 300 DPI and the layers thus given an option in the dialog box

    I get the message not enough memory to save the file.why t - he not save? my laptop has enough memory to another 4 pcs.

    Thank you.

    Illustrator is a 32-bit application, until CS6 hits the streets. This means that it can only acess about 3 GB of RAM in it any time.

    Try breaking the file have in two different files and then recombine them into Photoshop.

  • What does "after effects error: not enough memory to initialize PSL.» (83:: 8) "mean?

    So, about a week before I did a fresh 64-bit Windows 7 ultimate on a new PC and installation subscribed to the Adobe Creative Cloud, After Effects CS6 and Photoshop CS6 of Adobe Application Manager installation, then all updates made (and I just checked right now at 22:35 on 26 July, I have the latest version of everything).

    After effects was working at normal, and then later, I tried to import a .psd Photoshop and I got the error message:

    After effects error: not enough memory to initialize the PSL.

    (83: 8)

    Then After Effects crashed. So now he opens normally, but when I try to import a .psd or open an After Effects project registered an earlier version of After Effects (CS3 to CS5) I get the same error and an accident, every time.

    The research forums, I see people talking about this error when you import .psds in CS5, and they say that to get the latest updates solved the problem for them (which obviously cannot help me). I use all legitimate software on a computer brand new with 32 GB of RAM, who has passed all my tests of physical stress, so I know it's not hardware related.

    The only thing that I've seen people suggest is pressed Ctrl-Alt-shift to the launch of the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the old AE files. When I close After Effects and reopen it without hold down Ctrl-Alt-Shift keys, it goes immediately to crashing.

    Of course chip-* answer is ' then hold down Ctrl-Alt-Shift, dummy "and I'll do it for now, but is there any idea what is the problem?

    I feel like kind of a stupid because I decided to stop using my versions student software Adobe (I was not a student for about four years) and pay the full price for the composition of the cloud and the latest creative suite, and it is full of bugs.

    Hello

    If on the windows machine, make sure that the system temp/tmp environment variables point to % USERPROFILE%\AppData\Local\Temp, if it's in a different location, you will experience crashes in various programs of Production Premium (bridge, prelude), not able to import a psd in first or AE, photoshop gives a strange on swapfile error as it tries to open it on the root of C :.  You can run individual programs high, although will not work with dynamic link between programs like body/AE.

    It will be useful.

  • could save bitmap for computer - not enough memory or resources to complete the operation.

    Save the bitmap for computer... always achievable by this message:

    There is not enough memory or resources to complete the operation. Close some programs and try again.
    .. was even trying to record on a blank disc of flash 8Gb and still does not work... Please help

    Hi Janey,

    ·         Do you get the error when you use MS Paint application?

    Check to see if the following is useful.

    Method 1: Perform a disk cleanup and then try to save the image.

    Description of the tool in Windows XP disk cleanup

    Method 2: Log a user account different to check the issue. If you do not have any user account then the create and check for the issue. Report of the results.

  • Error in the painting: "there is not enough memory or resources to complete the operation. Close some programs, and then try again. »

    Original title: new resource error in painting, whenever I try to close the file or select all content

    (Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:

    "There is not enough memory or resources to complete the operation. Close some programs, and then try again. »

    Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?

    Hi ebjeebee,
     
    This problem can occur for the following reasons:

    • If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
    • If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
    To resolve this issue, use the appropriate method:
    • If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
    • If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:

    a. open an existing bitmap.

    b. in the Image menu, click attributes.

    c. click on default and then click OK.

    d. on the file menu, click Save as and save the bitmap with a new name.

    e. close and restart Paint.

Maybe you are looking for