Not enough power USB on Portege M200?

Whenever I try on my Portege m200 portable USB devices, they do not work as long as they operate in a mode powered by bus, for example without external power. I wonder if the Portege does not offer enough USB power for some devices.

Here is what I tried:
(1) Freecom FS 50 - a slimline dvd burner comes with 2 usb cables. According to Freecom they will be powered by usb simply by adding the power of 2 usb ports. Result: The drive is not yet seen in my m200. Using of external power supply, the drive works by usb as expected.
(2) pinnacle PCTV 200e - external dvb - t receiver. Is recognized, but produces errors in any receiver software I've tried. However working on the FUSi Lifebook S series.

Can anyone confirm the waekness of USB ports? Suggestions or tweaks plus a train external powered usb hub?

Advertisement

Hello

The USB ports provide 500mA. It is a standard USB. If the external USB devices need more power than USB ports allow in most cases the external power supply is required.
You can also try plugging the USB hub with an external power supply, then connect the external USB devices to the USB hub.

In addition, you can try to change the settings in the properties of the USB root hub.
Go to the device manager select USB hub root, select properties and go to the power management tab.
Here, you can disable the option: "allow the computer to turn off this device?

Tags: Toshiba

Similar Questions

  • Aironet 2802i Radio0 has not started, not enough power POE on SG300-28PP switch

    When I restart Aironet 2802i which is powered by 28PP SG300 28 - Port Gigabit PoE + switch, I saw the following message:

    [* 13:47:31.8044 26/09/2016] Radio0 has not started, not enough power POE
    [* 13:47:31.8173 26/09/2016] DOT11_DRV [0]: set_channel channel set to 11
    [* 13:47:33.0109 26/09/2016] DOT11_DRV [1]: set_channel channel set to 36
    [* 13:47:33.6506 26/09/2016] Radio1 not started, not enough power POE

    Series Aironet 2800 get started guide mentions "any 802.3at (25.5 W) compatible switch port" and SG300-28PP seems to be consistent.

    Please advise, thank you.

    Dennis

    Oh sorry, I got a 2602 in my head, but you use the built-in WLC? I have not had the chance to play with those, but assumes that it will be the same.

    Try to display the summary ap and ap 802. 11A of summary config

    See you soon,.

    Ric

  • Message NVIDEA saying, not enough power

    Hi, I have a DELL Precision 670, XP. I got a message saying: "NVIDIA video card does not have enough power.

    I'm guessing it's related, but it seems to be the cause of my mouse freeze and be a general pain in the neck.
    I don't know what are the measures to be taken.
    I'd appreciate any help, explained step by step for a simple guy, like me :)
    See you soon
    Bene

    The computer power supply

    Yes.

    Have you added your computer hardware?

    You have recently opened the case?

    Otherwise, you could do it (with power off) and use a can of compressed air to blow out the accumulated dust bunnies.

    http://support.Dell.com/support/eDOCS/systems/WS670/en/ug_en/index.htm

    http://support.Dell.com/support/eDOCS/systems/WS670/en/ug_en/before.htm#wp1138548

    A power supply for the Dell computer is probably available from 3rd parties (here is a used one for $ 9), but if you want directly from Dell, find your "Service Tag" Dell and go here: http://accessories.us.dell.com/sna/DellPartsFamily.aspx?c=us&category_id=7566&cs=19&l=en&s=dhs& ~ ck = anavml

  • EliteDesk 800 G1 USDT: usb ports do not provide enough power

    We have a scanner usb requiring 500mA of power.  However, for many of our clients using HPs, the usb ports do not provide enough power to the scanner causing the application to crash.  Some customers use the HP EliteDesk 800 G1 USDT, others use HP zero client t310.  Connect the scanner to a usb hub powered solves the problem every time.

    Y at - it changes, they can do for the Bus USB controllers to ensure that a particular port will be able to provide 500mA so they did not need to buy a usb powered a system hub?  Or do you have another suggestion?

    Thanks in advance.

    I'm not familiar witht eh models accurate but 500MA is the output for USB 2.0 max but 3.0 can go higher have you tried usingn 3.0 ports if not you can also get a cable Hat uses the power of 2 ports.  Many systems have problems with the only Scanners USB and power supply.

  • Portege M200 won't start CD-Rom USB

    I tried used, pressing C, changing the Bios and F12 boot boot from CD-Rom. None doesn't seem to work, if anyone has any other suggestions I would be grateful.

    Hello

    Unfortunately I can't help you much about it because I do not have this Portege but I found interesting news on the Portege M200 and support for recovery disks:

    The Portege M200 supports the recovery through the BIOS (by pressing 'C') with the USB 2.0 card and PCMCIA (16-bit and Cardbus).
    Readers and following (USB, PCMCIA) controllers have been tested successfully:

    one) Toshiba, PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
    (b) Toshiba PA3402E-1DV2, Rev.501, USB 2.0 DVD Super Multi drive, SN: 5362870112
    (c) Toshiba, PX1055E-1NST, (Freecom drive), SN: 3431490096
    with a PC Card (16 bit) card, cable II, PCMCIA, Rev.043.242, SN: 18496 043 3999 0343 01093
    (d) Toshiba, PX1055E-1NST, (Freecom drive), SN: 3431490096
    with a CardBus cable II, MAP of BUS, Rev.136, SN: 16693 136 3999 0149 06122

    The drive used in conjunction with the Contoller PCMCIA or USB is not so important due to the fact that the driver in the BIOS should allow the controller first.
    There is a generic CD-ROM drive implemented in the BIOS for the connected player.

    Tested with:
    Toshiba, PX1054E-1NST, (Freecom drive), SN: 151192845
    Card CardBus, cable II, CARD BUS, Rev.136, SN: 16693 136 3999 0149 06122

    The "PC Card controller Mode" settings in the BIOS has been 'Automatic Selection '.
    This means that you have nothing to change in the BIOS, because it is the default value.

    It could happen, to connect the power supply in certain circumstances, for example:
    Battery is charged too less.
    The PCMCIA supplies unless energy location.

    Recommendation:
    If a player is used with a built in battery, please always connect an appropriate adapter.

    For the recovery of USB 2.0, 2 following drives have been tested successfully:
    one) Toshiba, PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
    (b) Toshiba PA3402E-1DV2, Rev.501, USB 2.0 DVD Super Multi drive, SN: 5362870112
    (c) Plextor PX-W4824 TU, USB 2.0 CD - RW drive

  • Seeing flashes of power on Portege M200

    My Portege M200 my power light flashes orange 10000110 (or... _ _ _.) in Morse code) what it means?

    It starts flashing when I try to power will not end until I take the battery and power supply outside.
    It will start flashing even though I start without battery!

    Hello

    When the laptop has a problem with power (e-card), power sends the hexadecimal code.
    In your case, there are two problems:

    -To know what this code means that you know exactly how to read this code. The binary code must be converted into hexadecimal code, and then you can compare the code with a description of the maintenance manual.
    -Maintenance manual is not a public document.

    Unfortunately, there is nothing you can do alone. Please contact nearest Toshiba authorized maintainer and leave check your laptop.

  • Portege M200: serial port does not work with port replicator

    Hello
    I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
    As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

    Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
    How can I get this port recognized so that I can use it.

    Thank you very much
    Lee

    Hello Lee

    I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

    This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

  • Portege M200 does not detect the Modem PCMCIA card

    I have the Portege M200, when I insert a PCMCIA card (LAN or wireless) the pc detects it ok but if I insert a modem PCMCIA ANY, as a standard 56 k modem, modem card v620 air verizon or a sierra wireless aircard 710, the pc does not detect any, nothing happens when I put it in or out.

    V620 Verizon is the card that I have to make it work as soon as POSSIBLE, others, I used for the test, it seems that modems do not work for some reason any on the PCMCIA.

    any help?

    If the WLAN card manufacturer supplied driver with this card please read manual how to install it on the right track. It is possible that the driver must be installed first.

    Sorry, but my opinion on the laptop PCMCIA port is OK and if you need support try to contact the manufacturer of the card. They should have enough experience with own products.

  • Can not boot from the CD to recover OS - Portege M200

    Hello

    I'm working on my Portege M200 friends that she bought used. Only, it came with an external USB CDROM drive and the laptop computer AC adapter. To make things better the HD is no longer recognized by the BIOS. I had a spare HD so I installed it and now the BIOS see the new HD, Yay!

    I also discovered that I could buy a replacement Toshiba system recovery CD, new Yay! But before I do that I wanted to make sure I could boot from the external CDROM drive. I plugged the CDROM drive and attempted to start on a spare windows xp CD. But it does not start on the CD. I made sure that the CD-rom drive has been first in the BIOS boot priority, but that doesn't seem to work.

    I read the other posts that mention the boot directly from the external CD-rom USB drive does not work and I have to boot to the CD-rom drive by plugging the CD-rom drive in a PCMCIA card. If I have to buy a PCMCIA card that has USB ports for connecting external USB CDROM drive in for I can boot from a CD?

    If there will be any brand/type of work? If this is not the case, what brand/type is known to work.
    Any advise will be greatly appreciated!

    BIOS of the portege recognise only a limited number of pcmcia-CD-disks

    in this thread you will find all the information you need:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=71179𑘋

    but your portege also boots most of the readers of usb_FDD; If you make a BACK-boot disk with the appropriate drivers for your CD-ROM usb drive you can use it without restrictions bios

    as you can read that this method will work only in a DOS environment, that is why it is absolutely necessary to format your hard drive to fat32, otherwise it will not be recognized

  • The fcpcmcia.sys file is not found on a Portege M200

    Hello

    Someone at - he never understand the problem "the file fcpcmcia.sys is not found"? I saw in another post, but suggestions does not solve it and the post has been locked while I couldn't answer.

    I have a Toshiba Portege M200, who has the same problem when I try to put in Windows XP Tablet PC edition 2005 level. I used the recovery CD to return to XP Tablet PC edition (because the previous installation was messed up) and then tried to launch the installation of Windows from a couple different XP Tablet PC 2005 CD that I got from MSDN.

    When I try to reboot when the installation program tells me to do, he runs the Windows Installer, but it quickly fails with the "the file fcpcmcia.sys is not found." She did not mention a location where the file is supposed to be. I can't get into Windows XP Tablet PC (first edition) very well and I see there are 3 files fcpcmcia.sys hard disk.

    Any ideas? I have to upgrade this Tablet PC for the 2005 edition, because some software I need to run demands it. I tried to reinstall the fcpcmcia.sys (drivers FreeCom) but that did not help.

    The CD player I use is a Targus slimline CD-ROM/DVD-ROM (PCMCIA, USB not) which is recommended by Toshiba on their Web site.

    Thank you

    Bob

    Hello

    It is difficult to say why this message.
    The problem is that you have installed the OS of the original note Toshiba recovery CD.
    On the page of the Toshiba driver I found the cardbus driver. Maybe you need this driver?

    Usually if you install the new operating system, you must install the correct drivers Toshiba in the right order. The chipset utility, cardbus, common modules driver are very important and must be installed first.

  • "Your bootable USB key could not be created there is not enough space available on the disk.

    I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

    MacBook Pro (retina, mid-2012)

    2.6 GHz Intel Core i7

    8 GB 1600 MHz DDR3

    NVIDIA GeForce GT 650M 1024Mo

    Use a 8GB drive.

  • "Your bootable USB key could not be created. It is not enough space available on the disk.

    I tried more than a dozen times and ended up with the same results. I bought a 10 windows and disk utility, I created an ISO. Then open Boot Camp and regardless of the USB or external driver I use Boot Camp said that the space is not enough! I used 8GB - 16 GB - 32 GB USB and not everything works. Then I used Baffalo external driver with 1 t and I still got the same message. In all attempts, I erased/formatted and made sure that the format of the USB is MS-DOS. But nothing has worked.

    Anyone know why?

    I use an iMac with screen Retina 5 K (mid-2015) with 3 t

    atooma wrote:

    Anyone know why?

    The W10 installer you have is a Setup 32-bit/64-bit mixed and has one or more files that is larger than 4 GB. It does not fit on any drive formatted as FAT.

    As 2015 Macs do not support a USB Installer. They create an internal partition called OSXRESERVED and use to install only W8.1/W10.

    Can you download an ISO only 64-bit https://www.microsoft.com/en-us/software-download/windows10ISO and test?

    Please see https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for more details.

  • Bootable USB-CD/DVD drive need for Portege M200

    I couldn't find any list with bootable USB-CD-& DVD-ROM-drive for Portege M200.
    No boot on USB drive. Some change to the boot of other USB devices?

    Sorry for my English

    Hello

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=45144

    Horwath user posted a link to the Toshiba document that gives all the information on the CD/DVD bootable USB drives.

    In addition, you can buy a compatible USB WEIRD of the ASP from Toshiba

  • Portege M200 - keyboard works in Bios/DOS, not in Windows

    Hello!

    Before all sorry for my poor English :-/

    I bought a Portege M200, installed DR - DOS and then Windows XP Tablet Edition.
    The keyboard does not work in the BIOS and in the BACK the keyboard worked perfect BUT under Windows XP.

    I have installed:

    1 - Toshiba ACPI common Modules for Windows XP (v6.02.00.TE, 31/08/2004; 2 M)
    2 - Toshiba Tablet PC Buttons driver for Windows XP (v1.0.0.5 - RC2; 07/11/2003; 1 M)

    but nothing helped...

    In the material/Systemmanager (Geratemanager), I now have following features:

    + Human Interface devices
    -"HIDDEN-konformes Gerät" (German)
    -"HIDDEN-konformes Gerät" (German)
    -Toshiba Tablet PC buttons Type N
    -Wacom smart Tablettstift (German)

    + Keyboards (German for the keyboard)
    HID keyboard

    Can someone help me?

    Thank you very much

    Best regards

    Marco

    Dear Ment0r

    what your BIOS Setup? I must say that the hardware is configured by the operating system.

    Normally XP tablet should discover the keyboard without problems. What type of keyboard you have, German or international (there the umlaut?)

    In Device Manager, (right-click on "My Computer", select Properties, then hardware, Device Manager), is a current keyboard? Try uninstalling (right mouse button) and then perform an Action-> Scan for hardware changes.

    I hope that you will be able to solve it, please let us know how you rate...

  • Portege M200: registering does not voice when you use the handwriting recognition

    When I'm in "tablet mode" using handwriting text recognition that my Portege M200 regularly presents a message to say, he could not save the speech recognition and I have to switch off the microphone if I do not use it. I often use it to take notes of the meeting so there is always background noise. Usually, text is lost when this message appears. The message will also appear when I save.

    How to turn off the microphone while maintaining the functional handwriting recognition please?

    Just a question: what software do you use for text recognition?

Maybe you are looking for

  • Satellite L670D will not be upgraded to 6 GB to 8 GB of RAM

    When I got my L670 I upgraded the RAM 6 GB by adding a module of 4 GB to 2 GB provided. Everything worked fine for a year., but now I want to spend the 8 GB maximum. I bought another 4 GB module to replace the 2 GB. However, the machine does not even

  • Error 80070490

    Anyone know how to fix this error? I get every time I try to update to Vista. Thank you!  -Randy DeForest http://cycogeek.fiesta25.com

  • Cannot delete Hisory in the address/location Bar bar

    I am slot Internet Explorer 8 on a 32-bit Windows Vista laptop "Home Basic" with Service Pack 2 installed. No matter what I do, the 'story' won't delete my history drop-down list in the address bar. I tried:-Deletion of the history (cookies, all)-Aff

  • Cisco 1242AG Config AP watered

    I have an access point that has been on a WLC LWAPP but during an upgrade, it is watered one got it.  When starting, it just stops and shows red lights.  I comforted inside and it will start to boot and then give error loading 'Flash:/update/c1240-k9

  • Help. Installation of grid stuck with INS 40908 error

    Invalid hostname error. * INS 40908All hosts NSLOOKUP returns IPs and are name to ping scan requests can also be resolved via nslookup/ping. Nothing is defined in the file hosts everything done via dns and confirmed by another VMOracle Linux 6.5 x 84