Not ' on' button pressed, then press on + or - keys to adjust the brightness of the screen on HP10BII +?
Not ' on' button pressed, then press on + or - keys to adjust the brightness of the screen on HP10BII +?
Just got a new unit, and one of the first things after how to turn it on, in the getting started manual, it's that if we push the button 'On' and then hit the + or - less buttons, it adjusts the brightness of the screen. On my 10BII + does nothing... so I wonder if I have a defective new out of the box. So far, all the rest, seems to work.
Thanks in advance for everyone would be can confirm it should work.
I can confirm that the 10BII + adjusting the contrast has very little effect.
When you look at the screen at a low angle, the number "off" and the lights can be seen to slightly increase & decrease the contrast.
For normal use, the contrast setting has no useful effect.
.
Tags: HP Tablets
Similar Questions
-
I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer. I use V10.11.3. An idea about what is happening
Hello mpm068,
Thank you for using communities of Apple Support.
Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Take care.
-
On the screen, everything seems OK and changes, i.e. to add text a.s.o., can be made. But then the document cannot be saved or printed. For printing, the necessary configuration looks ok but then comes the error message 'no page (s) selected for printing'.
"Cute PDF-printer" is possible and I can use it as a way to save the island on the disk. But this new document itself cannot be printed on paper, getting the same error message.
And when you try to change or any action on a pdf file, this action cannot be completed and closed, the PC crashes and the Task Manager is necessary for the closure of Adobe.
None of the advice given in this forum are useful. Adobe removing and reinstalling did not help either!
Hi pauld46488763,
Please refer to this thread:disorder PDF document printing error message does print no pages selected
Check if it solves your problem.
Kind regards
Meenakshi
-
Your help please with my problem. Thank you.
Try the settings > Safari > clear the history and data from the Web site. That could help.
Can you identify some pages where this happens? I took a quick glance and the pages I saw seemed reasonable.
-
I found that my laptop was only on xp pro service Pack1, so I made a few updates now, ive got running on service pack 3 but it keeps flashing up I have a non-genuine version of windows, windows is activated and I have a real sticker on the bottom of my laptop with the product key to this topic! This problem me by critical updates prevents someone can help!
Thank you very much
Rob
Update your product key, and use the one you located in the laptop, you can check out the link below to update your product key.
http://go.Microsoft.com/fwlink/?LinkId=204141
To update your product key
Open the Windows product key update tool.
When you are prompted to run or save the installation program from the Windows product key update tool, click run.
Follow the instructions in the installer.
-
Suddenly, every time I press on a modifier (shift, ctrl, or alt) key an icon indicating the name of this key appears on the screen. I do not change settings or do something out of the ordinary. I checked the Tablet and my keyboard settings (I use a wacom tablet and mouse instead of a regular desktop mouse) and everything is normal. I also assured that StickyKeys is turned off. It's incredibly annoying, please help.
Thank you
MHello
I suggest you to see link below and check if it helps.
Reference: http://forum.wacom.eu/viewtopic.php?f=4&t=2144&start=0
Hope this information is useful.
-
Not able to set the brightness of the screen to the point Windows 8.1
Hello
I m using HP Pavillion N208TX with the 64-bit version of windows 8.1. I am not able to adjust the brightness of the display key f2 and f3 and implementing market also. When I press these keys, it shows the slider to adjust the brightness on the top left corner of the screen but its not the brightness level from low to high. I've already updated the Intel HD Graphic driver sent by link for HP Cust. care. kindly help me on this ASAP...
Dear customer,
Welcome to the Support Forum HP and we are happy to help you.
Looks like you're trying to "Adjust the screen brightness in Windows 8.1" for your laptop.We will surely help you with that.
Please perform this step as indicated below to solve the problem:
1. go to search (at the top right point) and type Device Manager. Go.
2. expand graphic cards
3. right click on Intel(r) HD Graphics and click on disable
4 restart your computer
Note: Your screen resolution can be deformed now, you can simply ignore
5. turn the Manager of peripherals, graphics cards
6. right click on Intel(r) HD Graphics and click Enable
7 restart once again
Note: If at any time your screen goes off and won't come back, just HOLD down your power button until the
the computer shuts down. Then press power to restart the upward
Hope this helps, for other queries in response to the post and feel free to join us again
"I work for Hewlett-Packard.
Click on thePurple Thumbs Up icon in the lower right corner of a post"thank you *.
Please check accept as Solution if it solves your problem *.
Kind regards
K N R K
-
Although I read "help" information about the stylus and Tablet section...
Adjust the brightness of the screen on your Tablet PC
To adjust the brightness of the display on your Tablet PC
In Control Panel, open Tablet and pen settings.
Tap the view tab.
Under the brightness of the display, in thesettings list, tap the name of the power management to your settings to apply.
To make the screen darker or brighter, drag the slider to the left or to the right.
Press OK.
Notes
You can save battery power to turn down the brightness of the screen on your tablet PC.
To open Tablet and pen in Control Panel settings, double-click the icon change the stylus and tablet settings in the notification area of the Windows taskbar.
THE BRIGHTNESS OF THE SCREEN WON'T... DON'T HIGHLIGHT...
SO I CAN'T ADJUST THE SCREEN BRIGHTNESS...
... ANY SUGGESTION IS APPRECIATED... Thank you!!! ... YOURS, KATE
- What you have already tried to solve the problem
Hi Kate1428,
· You are able to change power options?
· You have a hardware power buttons to adjust brightness?
· What is the service pack on your computer?
1. create another level of power and check if the problem still persists. Link, please refer to: in Windows XP power management:http://www.microsoft.com/windowsxp/using/setup/learnmore/russel_02march25.mspx
2. update to the latest graphics card driver and check the results.
You can check the link below:
How to manage devices in Windows XP:http://support.microsoft.com/kb/283658
Another link for reference: manage your Tablet PC battery Power:http://www.microsoft.com/windowsxp/using/tabletpc/learnmore/managepower.mspx
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
The screen does not appear under the eyes
original title: I use a screen flat tv for my monitor & for some reason, I don't see all of the screen. He cut all half an inch around the edge of the screen. Is anyway to fix this?
I am running XP, I have a NVidia GeForce GT 240 video card & I run it via a HDMI cable.
Hello
This could be due to installed the wrong display drivers or a bad resolution that has been put in.
Method 1: change the resolution of your screen
1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
2. click the menu drop down next to the resolution, move the slider to the desired resolution, then click on apply.
3. click on keep to use the new resolution, or click back to return to the previous resolution.
Click the mentioned link which will help you to change the resolution of the screen below.
http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolutionMethod 2: refer to this article below mentioned which may help you in the matter of fixing.
Troubleshoot Windows display the text on the monitor is not readable
http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/Get the best display on your monitor
http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitorIf the problem persists you can also try to download the latest display drivers on the manufacturer's Web site and try to install then check.
Here is the link to download the NVidia drivers for the video card NVidia GeForce GT 240
http://www.nvidia.com/object/WinXP-301.42-WHQL-driver.htmlHope this information helps.
-
How to move from the position of the START button on the screen of my Windows vista?
I wonder why the START button of my windows vista changes its position on the screen of my laptop. I tried to search the solution by right-clicking the windows logo ang then go to properties and proceed to the taskbar button. From there I could not fined option on how to change the position of my taskbar, usually on the lower part of the horizontal of the monitor. Now, he has moved from the left upright. I need to restore the parameters passed. Please help me.
Hello
read this:
http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar
Unlock and move the taskbar
Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.
TaskbarView all
To unlock the taskbar Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.
NoteTo lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.
Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.
-
Windows 8 screen does not fill the screen of my laptop, how to correct?
Just installed windows 8 on my laptop, but it is less broad than the laptop screen (there are black stripes down each side approximately 1 "wide).
Tried to set the resolution, but it will not let me, how do I fix this please?
Welcome,
step 1: download your graphic driver.This link might help you:Then, you can change your resolution in the Screen Resolution settings window, or click with the right button of your office.
This site might help youresolutions of laptop are usually:1400 × 10501280 × 8001024 × 600 (unusable due to the conflict in the requirements) -
Equium A100-027: can not get the screen turns off automatically in Vista
Hello
Got one of the new A100-027 of the load with Vista a couple of weeks. I can't get the screen to stop automatically when the appliance is left unattended. Standard windows screen saver or power options makes no difference. The screen is always on when I get back to the schedule of the machine later, I don t want to put a 'sleep' mode because the machine is internet access.
In desperation I changed the option to close the display does not go into mode 'sleep', but it would be nice if the screen would make her s auto off, instead of having to close the screen every time.
Thank you very much
ChrisA bit of an update, I found the screen stops automatically in normal conditions. But then, I leave the computer running a program of file sharing peer-to-peer on the net that he will not cut the screen down. Even minimize the program doesn t allow the screen to close.
-
How do you reposisition the toolbar background down
Wednesday, June 13, 2012 19:45:28 + 0000, BJWoodham wrote:
My tool bar downstairs was on the right side of the screen when I turned on the PC this morning. How do come back on the bottom?
You say "toolbar." Do you mean the taskbar?
Although by default, the taskbar is displayed on the bottom of the screen,
It can be on any of the sides on what you prefer. To move any
side to side, simply click an unused portion and drag
where you want it. Don't forget to click inside it, not on the edge.
by clicking on the edge and dragging will resize not move.If it does not move, it can be locked. In this case, right click on it
and uncheck "Lock the taskbar", then try again.Moreover, with the screen monitors wide today, I prefer the taskbar
on the left or the right of the screen. I think that allows a better
use of real estate than have it at the bottom of screen.
Ken Blake, Microsoft MVP -
I thought I was doing the right thing, but now it is clear that I was not properly clean even if I was very gentle. Why the screen lights up or really light up at all. Completely black and the keyboard does not light either. Someone has an idea? Thank you
Unfortunately, vacuums are very statically charge and their use within electronic devices is usually not a good idea. It is very possible that the discharges of static electricity has damaged your iMac.
I hope that you unplugged the iMac before cleaning. Make sure that the iMac is reconnected.
Hold the Apple store nearest to the assessment of the iMac.
-
I have xp sp3. When I turn it on, it lights up and then the screen stopped occasionally. and after that I cut the screen off, then on again, it turns on but the screen is sometimes alittle bit off. who is wrong?
Hello
1. don't you make changes to your computer, after which the issue started?
I suggest that you follow these steps and check to see if they help.
Step 1:
Update of your display drivers and check if this is useful.
Step 2:
Reinstall your display drivers, and check if that helps.
Maybe you are looking for
-
Tecra A11 no sound by mini Displayport
Hello Guy,.I hope you can help me so solve my problem.I want to connect my Tecra A11 with a Logilink mini Displayport 2 HDMI adapter for my Toshiba Regza LCD. The video connection was quiet easy, but I'm not able to get the sound of the LCD screen.Is
-
Tecra M2: How to connect on port DVI - D LCD with DVI - I and at 1600 x 1200
My Toshiba Tecra M2 has a GeForce FX go5200. Docking station has a DVI - D port. I want to use an external LCD screen which is equipped with a DVI - I port. When you connect a DVI - D cable to the DVI - D between the ports and monitor Replicator and
-
How can stop a subscription I pay for every month
How I can countermand of payment on an application I have to pay for?
-
Why libraries folder opens at startup?
Why libraries folder opens at startup? I don't want this opening folder at startup. So please help and give me a solution to my problem.
-
Why didn't I sign every time I use the computer
I just Windows 8 and whenever I want to use the computer for me to sign. I do not want to connect. That's not all: I leave the computer for a period of time, then again, I have to connect. I'm really tired of signing in. Help, please!