Not possible to eliminate the Power Saver Utility of the OS

Similar Questions

• Satellite A60: Not possible to install hotkeys & power saver - code: 0x7E

  I have a Satellite a60 laptop
  I installed windows xp home sp2.
  I downloaded the drivers from the toshiba site and I met problems with three of the programs.
  one is the 'Hotkey utility"which does not work and the only (when run in the CMD window)"program too big to fit in memory"message and does nothing.

  the second is with the hotkeys "display" utility which after installed said that "driver is not found.

  the third it 'energy savings' which, when installed alone gives an error: "a fatal error has occurred. "This program will be terminated code: 0x7E.

  What should I do to solve these problems? Help, please
  Thank you
  Ohad

  Hello

  Why do you not use the Toshiba Recovery CD?
  On this CD, all of the programs, tools, and drivers of Toshiba are preinstalled and should work without any problems. The installation is very easy.

• recently, I intend to download, but unfortunately this is already more than 5 attempts. Thanks to the slow connection and the power outage, my download has failed to complete. Would it not possible to download the app again? Concerning

  Recently I wanted to download, but unfortunately it's already more

  only 5 attempts. Thanks to the slow connection and the power outage, my

  to complete the failed download.

  Would it not possible to download the app again?

  Concerning

  A trial version is not different from the full version.  Using your serial number to activate a trial version, the access limit is removed.

  If you get access errors thrown at you when you try to use a download link, check that you have enabled cookies and clear your cookie cache.  If he continues to not try to use a different browser.

• Satellite Pro P100-327: Power Saver utility

  I have a Toshiba Tecra S1 and Toshiba Satellite M40X and two of them had a utility called 'Save energy' that I found very useful. Windows has its own power plant, but it cannot control things like the brightness of the screen and separates not plugged in battery modes modes as well.

  However, the download page here does not list Power Saver for the P100 series and it was not bundled with it, is it not possible to get the energy savings for my new laptop? It would be really nice to be able to use it here. In addition, a gain of power for a different Toshiba laptop would be compatible? If yes which?

  Thank you

  Hello

  The Toshiba Power Saver is installed on the model more Toshiba laptop. On some models the Toshiba Power Saver is not included. Therefore, the Windows power management manage energy consumption.

  Obviously the Satellite P100 units with PSPA0E, PSPA3E and PSPA6E description are not delivered with the Toshiba Power Saver utility. Usually it is not recommended to use tools designed for other models of laptops.

  Sorry, but I think you have to live with it.

• Satellite L10-270 - error Power Saver, utility

  Hello.

  I have a Toshiba Satellite L10-270 and because no standby power utility has been installed on.

  Then I looked for the Toshiba Power Saver, utility and try to install it, but I was unable to make it work. The battery is very low, I really need this software to work.

  Sometimes I get a message:

  "A fatal error has occurred. The program will end.
  "Code: Ox7E.

  And sometimes the message:

  «Cannot be opened because you do not have access rights to use «Toshiba power saver»»

  I hope you can help me, all brands have a power management utility work, I was hoping that it was the same for Toshiba. I hope!

  Any solution, a way to run the Toshiba Power Saver or any other software that could replace it.

  I have another question, where can I find the phone numbers and e-mail technical support or service after sale?

  Thank you.

  Hello

  The energy saving was not preinstalled on this unit because this utility is not supported on this device (Satellite L10-270).
  It would be very interesting to know where you found this tool?
  I put t I think that this energy saving will not work properly because it was designed for another unit. In this case, you must use the Power Options of Microsoft Windows that you can find in the Panel

  In addition if you want to contact technical support please visit this site. You will find detailed information.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/csg_national_entry_page.jsp?service=EU&from=http%3 A / / www.toshiba-europe.com/

  Good bye

• Equium A100-027: Toshiba Power Saver utility

  I have a laptop Toshiba Satellite A100-027 and the fan lights up every two minutes after he sat for 15 minutes and it's very annoying.
  I was told that I could change the cooling method so that fan is going with less or constant, but I can't seem to run the energy saver utility.

  I uninstalled the Value Pack provided with the laptop and along with other programs of Toshiba, but I installed it again on the site but I can't find the Power Saver utility. It is not in the control panel. I see a folder with the files in the program files, but whenever I try and open it, it does not load anything.

  Why is this?
  Can I use the Power Saver, utility on the A100-027 or is not compatible or something?
  I would think it should work on all laptops from Toshiba.

  I can do a cover and try it, but I don't know if it will work or not?
  If it works, what is the best option so that the fan is either on a lot less or is permanently at a lower speed?

  I'll send the laptop for Toshiba to watch because I hear an audio glitch/cracking/fuzzing when I listen to music and the fan comes on and off and I think it must be some kind of small glitch to fix, but I don't know if they can repair. If they don't fix it, they can it replace?

  Hey Gideon,.

  I know it sounds stupid to you, but make an update of the bios, to recover your system and then try to know what powersaver configuration works for you. If you are unable to reach a precise solution for model contact service partner.

  Can they please take a look at it.

  Welcome them

• Fatal error Power Save, utility 0 x 51 on Satellite M70

  I just joined my M70 to a domain (SBS 2003) and get this message when I connect to the domain.
  If I was able to connect to the account of local user on the laptop then it works fine.

  If I go into power options in the control panel and select a different power mode then the error disappears but I can't select TOSHIBA Power Save plans in the combo of plans.

  Help, please

  See you soon
  Dave

  Maybe the power saver utility and power saver driver are not installed for all the user accounts on the M70.
  Or all user accounts are not allowed to use power saver utility and driver power saver.

  On the Toshiba driver page, you will find the Toshiba Power saver utility and the driver of Toshiba power gain.
  Both applications must be installed and run together.

  > If I go into power options in the control panel and select a different power mode then the error disappears but I can't select the TOSHIBA Power Save system in the combo of plans.
  It is clear. If Toshiba power standby mode will NOT be chosen in the Windows Power Options, then you will not be able to use the Toshiba power saver.

• Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection.

  "Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output screen protection. Try to install a driver available for your video card. Is the error that keeps popping up. Even after the update driver... now what do I do?

  Hello

  1 did you change on your computer?

  2. not this problem occurs with the particular DVD or with other DVDs?

  3. is the specific issue limited to the DVD?

  4. are you able to play the DVD in the other system?

  Method 1:

  I suggest you follow the link and check.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Method 2:

  I suggest you follow the link and check.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  http://support.Microsoft.com/kb/2004673

  See also:

  Cannot read DVD

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• Not possible to change the boot order in the BIOS on Satellite satellite A10-403D

  I want to be able to boot from CD or USB STICK at first upward, but in the BIOS, it is not possible to change the boot sequence...

  Thank you for helping me! :)

  Hello Susan

  It will be interesting to know what model of laptop you have. By the description of the problem, it is always useful to know the exact model of laptop.

  When you turn off your laptop, press F12 and let us know exactly what is happening. By the way: can you explain what happen when you try to change the boot order in the BIOS settings?

• Not possible to use the Nvidia GPU both graphics primary source all the time?

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  brian1208 wrote:

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  To force an application to use your NVIDIA graphics card, right click on its shortcut (or an .exe file), point on run with graphics processor and select the NVIDIA processor high performance.

• Get the message: it is not possible to load the user profile after Windows updates

  Original title: Windows won't let me sign after updates

  Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

  Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

  Hi romanista,.

  You can read the following article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Not possible to do the updates

  I tried to do the update for the Nokia Music Player, but it has been discontinued. Once this system get stuck while it cannot install most anything. It happens only the error message which says that "it is not possible to update because the other installation is running. Problem, is that it is not possible to remove Nokia Player (using the control panel) because it gives the error message "it is not possible to remove the program because it is used by the other program. What should do?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error "Windows Media Player cannot play this dvd because it is not possible to activate the analog copy on the output screen protection".

  Original title:

  Trouble viewing a movie on dvd.

  Hi, I have windows 7 on my mini with an external dvd/cd. I'm not able to watch a movie because of the error "windows media player cannot play this dvd because it is not possible to activate the analog copy on the output screen protection. Try installing an updated video card driver"Please help... I am new to this. Thanks in advance.

  Hello

   
  I suggest you try the steps in the following link and check if it solves the problem:
   
  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection
  http://support.Microsoft.com/kb/2004673
   
  I hope this helps!