Not possible to set the HDMI output as default screen on Qosmio G30

It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
Any solution?

Best regards
Nicolas

Hi Nicolas

Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

Tags: Toshiba

Similar Questions

  • I can't set the HDMI output as default device and I don't get sound from the HDMI output.

    I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

    Windows Vista Home Premium SP2 64-bit
    with the NVIDIA GeForce GTS 250 graphics card
     
    Original title: audio HDMI cable no.

    I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

    Windows Vista Home Premium SP2 64-bit
    with the NVIDIA GeForce GTS 250 graphics card

    ==========================================================
    The following article might be worth a visit:

    Windows Vista - HDTV: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions
    (See _ why don't I hear audio when I connect my computer to a HDTV)
  • Is it possible to set the stereo output to mono in Windows 7

    Stereo to mono in Windows 7

    I looked everywhere in the settings of the sound and the accessibility settings in Windows 7. I can't find THE settings for the computer stereo sound to MONO.  I have the card REALTEK sound integrated on my Gigabyte motherboard.  I checked the settings as well.  The ONLY thing I've been able to do is to change the balance, and it does not solve my problem.  You see, I'm deaf in my left ear, so stereo records that I listen to with headphones on, I miss a lot of the sounds within the music or movie or whatever I'm listening.  On my Mac, all I have to do is click on a button in the settings, and the computer will play the stereo sound from TWO speakers, which is what I want on my PC.  I can't believe that this feature is not available in Windows 7.  Any ideas?

    Right-click on the volume icon in the taskbar > playback devices > select device > configure > choose Mono > then click > click on finish

    is theres another longer way to do this too just make a single lane on the spot but still running two-speaker MONO BAM

  • Is there a way to set the audio output in mono in Windows 7?

    I have a set of speakers, but one of the speakers is broken, so for now if I have a stereo song I get only half of the music. Is it possible to set the sound output in mono on Windows 7 so I can listen to the stereo songs via a speaker? I'd rather do than buy a new set of speakers.

    Hi Jamsoup,

    I would like to inform you that, down from sound to mono-stereo sampling is not possible, since stereo sound is a sound standard setting.

    Stereo speakers are designed to produce a sound to both speakers and there is no option to change the settings to use as mono.

    I also suggest that you contact the speaker manufacturer or the manufacturer of the computer for assistance on this issue.

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error "Windows Media Player cannot play this dvd because it is not possible to activate the analog copy on the output screen protection".

    Original title:

    Trouble viewing a movie on dvd.

    Hi, I have windows 7 on my mini with an external dvd/cd. I'm not able to watch a movie because of the error "windows media player cannot play this dvd because it is not possible to activate the analog copy on the output screen protection. Try installing an updated video card driver"Please help... I am new to this. Thanks in advance.

    Hello

     
    I suggest you try the steps in the following link and check if it solves the problem:
     
    Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection
    http://support.Microsoft.com/kb/2004673
     
    I hope this helps!
     
  • Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection.

    "Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output screen protection. Try to install a driver available for your video card. Is the error that keeps popping up. Even after the update driver... now what do I do?

    Hello

    1 did you change on your computer?

    2. not this problem occurs with the particular DVD or with other DVDs?

    3. is the specific issue limited to the DVD?

    4. are you able to play the DVD in the other system?

    Method 1:

    I suggest you follow the link and check.

    Open the Windows Media Player DVD Troubleshoot utility

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

    Method 2:

    I suggest you follow the link and check.

    Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

    http://support.Microsoft.com/kb/2004673

    See also:

    Cannot read DVD

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

  • I get this message when you try to play a dvd - Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection.

    I bought a DVD called "The Secret" and I can't play.

    And I get this message
    Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection. Try to install a driver available for your video card.

    Hello

    Thanks for asking!

    1. have there been recent changes to the system before the show?

    2 is confined to a specific DVD?

    3. What is the file format of the DVD?

    Method 1:

    Follow the link and follow the steps. Check if it helps.

    Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection

    http://support.Microsoft.com/kb/2004673

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

    Method 2:

    Follow the link and update drivers display, check if it helps.

    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Answer with the results, I'd be happy to help you best.

  • Is it possible to set the time zone in NLS_DATE_FORMAT?

    Hi all
    Is it possible to set the time zone in NLS_DATE_FORMAT? If not, why?

    Best regards
    Valerie

    LON

    NLS_DATE_FORMAT is only the output format, you cannot use it for the time zone but...

    ALTER SESSION SET TIME_ZONE = '-4:0';
    ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
    SELECT SESSIONTIMEZONE, CURRENT_DATE FROM DUAL;
    
  • Qosmio G30-163: is it possible to get the HDMI by component

    Hello

    It seems that I'll be stuck with my Qosmio back to its own screen whenever I turn off my LCD TV. So what to do?
    I have a box of multiple component entry from another manufacturer. Is it possible to get the HDMI / component?

    While I listen to my signal through that?
    The only other option is for me to leave my TV in all of time...

    Hello

    Hmm, to my knowledge the HDMI / component is not possible.
    The HDMI-DVI adapter is known to me. Also the "cable DVI-component.

    In any case, I don't think that it is a large and serious issue. You can use the FN + F5 combination to toggle the display if the image switches to the internal display of the laptop!

    Best regards

    Goodbye ;)

  • Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

    Hello

    I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

    I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

    I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

    I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

    Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

    I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

    Thanks in advance,

    Alan

    PROBLEM SOLVED!

    It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

    Thanks again to all who have suggested things.

  • Not possible to change the boot order in the BIOS on Satellite satellite A10-403D

    I want to be able to boot from CD or USB STICK at first upward, but in the BIOS, it is not possible to change the boot sequence...

    Thank you for helping me! :)

    Hello Susan

    It will be interesting to know what model of laptop you have. By the description of the problem, it is always useful to know the exact model of laptop.

    When you turn off your laptop, press F12 and let us know exactly what is happening. By the way: can you explain what happen when you try to change the boot order in the BIOS settings?

  • Not possible to use the Nvidia GPU both graphics primary source all the time?

    I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

    The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

    brian1208 wrote:

    I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

    The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

    To force an application to use your NVIDIA graphics card, right click on its shortcut (or an .exe file), point on run with graphics processor and select the NVIDIA processor high performance.

  • is it possible to set the background color of a table or chart to be transparent?

    is it possible to set the background color of a table or chart to be transparent?

    Thank you

    Yes.

    Select tools palette (view > tool palette) and set the background of the graph as well as the control in transperent.

  • Get the message: it is not possible to load the user profile after Windows updates

    Original title: Windows won't let me sign after updates

    Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

    Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

    Hi romanista,.

    You can read the following article and check if it helps to solve the problem:

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    http://support.Microsoft.com/kb/947215

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Original title: unable to disable my lan connection

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • I turn off my connection to the local network, it is showing message.

      It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

      Please answer soon

      You have problems with programs

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi MVTDA,

    You can try the following methods and check to see if it helps:

    Method 1:

    a. Click Start and select run, type cmd and click OK.

    b. type net stop cryptsvc and press ENTER.

    c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

    d. restart the computer.

    e. open new command prompt and Type net start cryptsvc, and press ENTER.

    Method 2:

    If the same problem persists then you can try to uninstall the network drivers and check.

    a. click the Start button. Select run, type devmgmt.msc and press OK.

    b. Select the network card and right click on it.

    c. now, select Properties.

    d. in the Properties window, on the driver tab, click Uninstall.

    e. After you have uninstalled the drivers, restart the computer.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • AT105 with European firmware

    I got an AT100 for repairs (broken SD slot) and now it seems to have become an AT105. This then seems to confuse the Server Service Station, if she sees any firmware updates beyond the Android 3.1 which end up with after the repairs (I suspect that t

  • SmartScan 5520 is more the HP scan on OSX 10.7

    I have a HP Smartscan 5520 and it worked very well, even earlier today.  Now, however, whenever I try to scan a document, I get the error message "Unable to log on." I tried to reset the printing system as suggested here - https://discussions.apple.c

  • PROBLEM WITH THE INSTALLATION OF UPDATES

    When the computer tells me to reboot to complete the installation of updates, I do.  It stops normally, but when he tries to restart, the screen goes completely dark.  I have to press the market / stop button for 4 seconds & it stops.  I wait a few m

  • Need help with the removal of the media files on my personal computer

    I downloaded a media file and try to delete but asking special permission on my own computer and he repeats to me try again. I need help to remove this media file. Thank you very much

  • @ Eric HP technical support

    Our computer is completely dead a few weeks before, I was afraid really to call technical support, because that kind of thing is usually so frustrating, but I was helped by a guy named Eric, who was very helpful and patient, he does have a computer t