Not recognized as an administrator

Similar Questions

• Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

  Hello

  I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
  It seems that the built-in webcam is not connected.
  Thank you

  See Sony support site or their forum, this is a Sony webcam

  And no this isn't a feature of device, or something that should appear in the devices & Printers

• I am not recognized as program administrator of Windows wireless? How can I make sure that the system recognizes me as an administrator on all programs so that I can fix and to use them properly.

  The Windows wireless program does not work and diagnostic tests tells me to contact the administrator. I am the administrator, but the system I cannot use diagnostic tests or run the recovery. What should I do?

  Hi Redemption_Abounds,

  I suggest that you check if you can access msconfig from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hardware not recognized by non-administrator IDs

  Recently, I replaced the multicard reader in my office.  It is connected in the same way that the now dead card reader has been, and different individual readers are like hard drives appearing in my administrator ID.  Unfortunately, these same readers do not appear in the profile of my wife who uses a separate identity.  I guess I have some settings in offset, or his identity has a problem, but I was not able to identify the problem for a week now.

  Anyone know what could cause this problem?

  Thank you

  Rick

  After further troubleshooting, I decided that the issue is not software based.  It seems that the USB controller on the card reader has been connected to the motherboard has reached the end of its life cycle.  Thanks for your help.

• I am not recognized as the administrator. I am owner of the computer and the only user

  If anyone has any suggestions, they will be greatly appreciated.

  For as long as I had my HP G60-235DX notebook pc with windows vista. It won't recognize me as the administrator. I am the only user and the owner. I checked under the control panel in the user accounts, and he said im set as an administrator but when some programs want to run it says I must have administrator privileges and then stops the program. Any help would be good.

  You do a right click on the program > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Not recognized as an administrator when you try to update WIndows 8 to 8.1

  I tried to update my Windows laptop, 8 to 8.1, but the store didn't recognize me as an administrator. I double checked and I am logged in as the admin account. Please help, would like to have a step by step guide if possible.

  Hello

  Please, try the fix mentioned here and see if this helps you:

  http://www.kapilarya.com/fix-cant-download-Windows-8-1-from-Windows-store

  Hope this helps, good luck :)

• Not been recognized as the administrator of the computer

  Having downloaded software, when you try to open it, it says:
   
  "you cannot run for the first time, to register or unregister Sibelius, unless you are the administrator of the computer.  Please log in as an administrator of the computer and try again.  (After the recording of Sibelius, any user account can use Sibelius). "

  The only problem is that I am the administrator!  I tried switching between user accounts...

  Hi Blueberry.

  You can try the steps below and check if the problem is resolved.

  First, you will need to disable all security software on your computer and check for the issue.

  Make sure that you re-enable the security program after reviewing the issue.

  Then try to start your computer with the default Administrator account and check the number to do that follow the steps provided below.

  Open the start menu, type lusrmgr.msc in the search line and press enter

  NOTE: this file is located in C:\Windows\System32\lusrmgr.msc

  a. open the User Manager and local groups.
  (b) in the left pane, click the users folder.
  c. in the middle pane, right click on administrator and click Properties.
  d. activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  e. to disable the account administrator of Buit-in-
  (a) check the account is disabled box.
  f. click OK.
  g. close the window local users and groups.
  h. disconnect you, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.

  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.

  Now the steps provided above you must check if you are able to solve the problem,

  If you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and set the below corrupted user profile.

  Create a new user profile.

  Now you must create a new user account and check the question of do you need to follow the steps below.

  a. open user accounts by clicking the Start button.
  b. click Control Panel.
  c. click on user accounts.
  d. family Safety.
  e. click on user accounts.
  f. click on manage another account.
  g. If you are prompted for an administrator password or confirmation.
  h. type the password or provide confirmation.
  i. click on create a new account.
  j.Type the name you want to assign to the user account.
  k.Click an account type.
  l.Click create an account.

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• HP Pavilion DV6 DVD disc not recognized and the media player does not work

  My HP DV6 is having... issues.  Windows 7.  A little history:

  Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop.  HP support could not help or Fix - It programs work.  Had to restore it to factory default and that solved THIS problem.

  Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized.  Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.

  Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.

  More?  (Windows Explorer, not Internet) will be often expire or crash...

  I have Norton Internet Security with live update and have yet to have virus problems.

  Any help or questions greatly appreciated!

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit in the programs list.
     
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

• Duplex not recognized under Vista 64-bit printing accessory

  I recently had to replace my old computer with an HP Pavilion a6700f running Windows Vista Home Premium 64 - bit SP1.

  I got my 7410 HP all-in-One printer connected and operating, the latest software HP installed and checked for updated drivers, firmware or Windows updates to date. Everything is up-to-date.

  However, my two-sided printing accessory is not recognized. I tried to do an update of the parameters, but the accessory does not appear in the drop-down menus.

  I learned by HP Technical Support that it is a Windows problem, but I can't quite believe that even Microsoft would come out an operating system does not recognize the material of the major manufacturer.

  Is that what everyone knows about this problem? Is this really a Windows glitch?  If so, is there a workaround solution that will allow me to do automatic duplex printing?

  pdef1949 wrote:

  Bob sent me an email with the patch, but I'm not sure I'm reading it correctly because the patch does not work. I got an error message that the printer driver has not been installed and he gave me a window to select options. I think it installs just the drivers of Bob wants to replace.

  In the e-mail to Bob, he said save the attachment as % temp%\hpo7x00t.gpd.  I don't know where to put this, and this is perhaps why the patch has not yet worked.

  Can someone tell me with certainty where to save the file?

  You just need to save the DPG file to a temporary location.  Folder is the location for temporary files of the system, it refers to a directory.  If for some reason it doesn't, you can do the following to the administrative command prompt:

  mkdir c:\temp

  [save the gpd c:\temp\hpo7x00t.gpd]

  then in the copy command:

  copy c:\temp\hpo7x00t.gpd c:

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• USB device not recognized (Nothing plugged and the mouse does not)

  My mouse (microsoft) wireless worked well until what within hours.
  then I said to unrecognized USB device
  The port works, but for some reason any
  the mouse is not, went bought another mouse and still getting the same message.
  Plus I get the USB device not recognized pop up, same
  Tho, nothing is plugged into one of the USB ports.
  Any suggestions on how to solve this problem

  Computer brand and model?  Windows OS?

  Open the Device Manager

  Click on the + sign next to USB controllers

  Do you not see that unknown device listed?

  Right click on the playlists of USB root hub

  Select uninstall

  Close Device Manager

  Restart the computer to Windows reload the drivers

  USB is now recognized?

  If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

  USB is now recognized?

  How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

  http://support.Microsoft.com/kb/953367

  Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

  http://support.Microsoft.com/kb/944292

  Run the System File Checker

  Right-click on command prompt and select run as administrator

  Type sfc/scannow

  Press enter

  Note: there is a space between sfc and / scannow

  How to analyze the log generated by the SFC Scan file:
  http://support.Microsoft.com/kb/928228

• "ipconfig" is not recognized as internal or external, command an executable program or batch file

  I get this error for all that is registered. I even tried to show ip and got the error that 'show' was not recognized. I am not able to connect to the modem and my internet provider refuses to help with my connection until it is resolved. Can anyone help?

  I am using Microsoft Windows XP.

  I had the same problem on my Sony VAIO, running Windows XP Professional SP3.

  My problem is that the 'PATH' environment variable does NOT include "C:\WINDOWS\system32".

  Any executable in this folder could only be run from a cmd prompt if the command includes the full path.

  Solution for me: Add "C:\WINDOWS\system32;" at the beginning of my variable of environment PATH, like this:

  Log in with administrator privileges.
  Right click on 'My Computer' and select 'properties '.
  Click the "Advanced" tab
  Click the "Environment Variables" button
  In the "System Variables" box, scroll down to 'PATH' and highlight it.
  Click on the button "Edit".
  In the "value of the Variable:" box, add at the beginning of the text "C:\WINDOWS\system32"; without my quotes.
  Make sure you include the semicolon.
  Click OK three times.

  No reboot needed. If this is your problem, then ipconfig should work immediately.

• My netbook with windows xp sp3 what OS do I recognized as an administrator. Can I uninstall the operating system, and then reinstall it again?

  I have a netbook with Windows xp OS pck3 srvc.  Last week everything was working perfectly, but since I downloaded some software on the net that he started to asked me to log on as an administrator each time I ran a software. I have a feeling that there is some thing/someone ' one that is manipullating my computer (spyware). Even if I try to restore my previous settings, he continues to ask me to log in as the system administrator not me recognized. Another problem is that I have no backup except with the one I have with Glary Utilities w/c is not recognized, either. What I can do.

  XP Home or XP Pro?

  Enter the following command at a command prompt:

  NET user 'username '.

  On the line "Local group memberships" are listed as a member of the Administrators group?

  Note that you need to use "quotes" If your username contains spaces, for example:

  NET user 'noslej ignacio.

  If you are not a member of the Administrators group, you can log in Mode safe mode with the built-in Administrator account and promote your account.

  Run a MalwareBytes scan on your computer: http://www.malwarebytes.org/

  This can also be useful: How to configure Windows XP to start in a "clean boot" State

  John

• USB device not recognized... Unplug the thing does NOT work

  It baffles me that THOUSANDS of people have this problem, or a variant of it, and no ONE at Microsoft or elsewhere also offers a real solution. Unless of course you want to count the method "unplug your computer", which is the most foolish band-aid for a problem I never heard, even if it works for a lot of people (most). I, unfortunately, am one of those for which the "disconnect" method magic does NOT work. I tried everything what all other posters and responder suggested (BIOS upgrade, change Legacy BIOS definition Enable to disable to activate again, driver updates, uninstall all USB, full power down and restart hours later, use CMD prompt to show only devices, etc.) and do not know what else to try. I would really like to see a REAL answer as to the cause of the majority of the questions posted about the USB error outside the usual "restore your settings, use your restore disk, unplug it, replace your USB key, etc etc etc. HEY! MICROSOFT! SOLVE THE PROBLEM! OR, Hey, here's an idea, a news for you, I'm sure that... don't they exude products until they have been tested (NO! I mean really, fully tested [see XBox 360 RROD])

  In case anyone reading this is a real working solution, I'm on a Toshiba A135-S2386, Vista Home, and each USB port is unusable on any device. All ports feeds the device and noise sounds to indicate that a USB device was attached and then proceeds to the display of the error "USB device not recognized" and shows and shows an unknown device connected. It does this for any USB device.

  FINALLY: PLEASE PLEASE PLEASE DO NOT POST A REPLY IF YOU USED THE METHOD OF "DISCONNECT", AND IT WORKED. Grats to you for fixing your computer, but I can just not read another 400 posts of "wow it worked for me great fantastic" when it does NOT work for everyone. I need something new and real. (Sorry to be all grumpy, but I'm tired of these kinds of problems from companies making billions off the coast of junk, defective, half finished, produced a car!) "You listen to Bill?)

  UPDATE: just ran a scan of the system file Confirmation via an administrator command prompt and it's clean...
  ALSO - was not that before, but now whenever I do a complete power down / reboot thing that it gives me a "Bad Checksum" error and I have to reset the date and time in the BIOS. I need to change the battery in MB? As I said it did not have this before and the USB error was produced, but could this be the problem? Bad battery MB CMOS?

  The bios of your motherboard is probably damaged.

  step 1. See if you can find a previous version of the bios of your motherboard and return date of the bios.

  step 2. Find the latest version of the bios of your motherboard and update your bios.

  Do not use a registered version of your current version.

  To check the problem is the motherboard or operating system. find something like a live Ubuntu CD

  http://www.Ubuntu.com/desktop/get-Ubuntu/download.

  or

  Make a Ultimate Boot CD for Windows

  http://www.UBCD4Win.com/index.htm you are using windows xp or borrow a copy to UBD4WIN.

  Both of the above run in memory (does not load on hard drive.

  Both a bit slow, but are excellent tools.

  Works like a normal computer.

  If you can see you USB devices, magicjack, ETC. your BIOS is not corrupt or motherboard problem.

  In normal windows if you see not the USB devices, magicjack, etc your windows install is corrupt.

  Reload Windows of difficulty.

  If you you do not see the magicjack, USB devices, ETC., your BIOS is corrupt motherboard or other problem.

  Redo your BIOS as described above.

  All other unwanted do not work , he was done !

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.