"Not responding" message at the beginning upward. SOLVED by the creation of a new identity & import the messages from the old to the new.

This only happens on one of my identities, the rest seems to agree...

When I start this identity, it's really slow & as soon as I click on anything it says "not responding".

After some time (about 10 min.), he will finally do something but, after a few clicks he strikes again.

8.1 Windows, IE 11, new software Thunderbird

While I appreciated the responses, I have completely abandoned after my last post that with the two security modes by running this identity still did not...

I found myself fixing by find and save the messages of this identity, creating a new identity folder and import the messages from the old to the new.
And then deleting the old identity in the list.

users /(your username)/AppData/Local/Thunderbird/Profiles

Tags: Thunderbird

Similar Questions

  • Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

    Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

    Hi TG24.

    Acrobat Reader 16.09.21 is now available in the App Store.

    It should solve the performance problem that you are experiencing.

    We apologize for the inconvenience.

  • address bar does not respond by typing the URL and press on enter

    Address bar does not respond by typing the URL and press to enter. All the other links work well. I used version 7 and version 8 upgrade did not fix the problem

    I had the same problem. I just uninstalled digsby ask toolbar, and now it works.

  • My Firefox exit and gives a "not responding" message once I used Google Mail. I tried to boot into "safe" mode and the problem persists.

    I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • Does not respond when deleting the Messages caused by ginormous basket

    After a clean install on Windows 8.1, Thunderbird sometimes says "Not responding" after trying to delete e-mails. After a few minutes, he responds, removes the e-mail message, and life is good. This happens not all the time, but often enough to ask why this happens. Y at - it an incompatibility with Windows 8.1? I find it extremely odd that happen all the time, and that it is in fact instead of crashing.

    Re: I didn't plan on messing with Safe Mode, because it is usually have to disable something within the system so that it can work.

    Is a debugging feature and it is simple and fast, but it offers very specific information that can be used to identify problems or refute these questions.

    Test Windows 8.1
    http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode
    Choose to start in "Safe Mode with network.
    If Thunderbird works ok, then there is a problem with an external program that does not work in Windows safe mode.

    If no there is always a problem

    Test Thunderbird safe mode:
    In thunderbird:
    'Help' > 'restart with disabled addons.
    If the problem goes away then the question is an addon.

    Other reasons for a temporary delay in any process could be for example: regular background updates or Thunderbird opening / the use of files large mbox among the many possibilities.
    Here is a link that you could use to help identify what is the cause or deny what does not, cause the issue.

  • Double click on the photo (my photo) causes PC freeze with message "not responding" (scheduled for the windows fax and picture viewer)

    WINDOWS XP

    "This program is not responding...". »

    I then have to click on the right upper window X two times to close the window. When it closes Finally, everything on the desktop disappears for about 3 seconds then reappears as if the PC restarted, but it does not actually restart.

    My images, the other day, all open without this feeze/final issue. I don't have these problems when you use Windows XP Paint, Jasc Paint Shop, or Quicktime to open images, once set by default... Just does not work with Windows Picture and Fax Viewer more and all my photos are already defined (default) to open with Windows Picture and Fax Viewer - clicking Properties confirms this.

    Also, if I right click on the individual image to 'open with' and manually choose 'open with' Windows Picture and Fax Viewer, it will then open and I can scroll all the following pictures an image in Windows Picture and Fax Viewer. "But I can't just click on an individual picture, otherwise, it will freeze just straight up.  Difficulty It Center Microsoft could not automatically repair because the shimgvw.dll file already exists.

    I used to always use Windows Picture and Fax Viewer with no such problems. I have not the slightest idea what happened... even though I was messing around with 1) Component Services > Security Com > permissions & launch Activate and Run permissions) 2 > Regedit > Edit > "Permissions" last week and changed "Registered Owner" in HKEY LOCAL MACHINE and some other stuff like that. Could permissions and changing names have caused this unexpected problem in Windows Picture and Fax Viewer? If so, the changes I made will not be changed back, then how can I fix a broken Windows Picture and Fax Viewer?  And if these changes, last week, have nothing to do with this "opening images in the image Windows and Fax Viewer problem,' so what?

    I did your suggestion before posting here. I saw the same solution as your addition, the interpreter, but it does not solve the problem because I already had the shimgvw.dll etc. in their proper place and my photos/images were not always open with Windows Picture and Fax Viewer the way I wanted them to open.

    Since I got my photos all open as I wanted (as before) this way to use Windows Picture and Fax viewer:

    Control Panel > Folder Options > File Types: I changed then each file/folder associated with 'images' to open with Windows Picture and Fax Viewer. I determined this by reading the details for each extension / the item highlighted. If the referenced details 'images', I then clicked on change and choose Windows Picture and Fax Viewer to open the extension.

    I went through everything everyone who was not obvious that they are. I made a change: BMP, GIF, EMF, JFIF, JPE, JPEG, etc... I changed at least 12 (more than I thought it was).

    Immediately after changing all of these types of files, I rebooted and Windows Picture and Fax Viewer was still working the way I wanted to (as before).

  • Since the last update, firefox "not responding" happens all the time. What's going on... Please help!

    Firefox has been "unresponsive" to recent months. After a short period, he would answer.
    Lately, however, it "does not" and my entire computer needs to be restarted.
    Please help - I am extremely frustrated.

    Follow the suggestions mentioned in the following articles:

    Check and tell if its working.

    May not be related to your problem, but some of your Firefox Plugins are out of date

    • Update all of your Firefox Plugins-> https://www.mozilla.org/en-US/plugincheck/
    • During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)
  • TV not responding like after the connection to the Internet

    I connected my Toshiba TV to the Internet smart 40RL953 yesterday for the first time in well over a year. An hour after cela screen at a standstill and when she returned there was no sound and the distance was not respond with the TV. I turned the freezer off and the screen and the sound came back but still no response from the remote control. I read another post on this forum that it might be to do a firmware update.

    Can someone help me solve this problem?

    > I read another post on this forum that it might be to do a firmware update.
    Have you updated the firmware to the latest version?

  • Satellite L650 - extremely slow at startup, then "not responding" message

    I bought my Toshiba Satellite L650/017 laptop about 3 weeks ago and it was working well.

    This week, I plugged a cable to work on my laptop and double clicked on the icon of Internet Explorer to see if I had access to him but found it is not the case then disconnected the cable and turned off the laptop computer on the internal internet.

    The next day, I found that the laptop could not start after restarting it a couple of times so I ran on safe mode and did a virus check which proved to be negative.

    The next day, start seemed a bit faster and I could access some of my Word documents stored on the hard drive.

    Today, problems with the start seemed even worse and it took about 10-15 minutes to access the WINDOWS page - mainly get a gray screen with cursor work dark.

    When she has finally reached the office page after trying to open any application after a few minutes, a message "not responding".

    How can I fix? What is initially to run so slowly?
    He doesn't has only few Word documents stored there on the hard disk. I hope someone can help me with this...

    Hey Buddy,

    To be honest in these cases where the error just sometimes, it s not clear what part is defective or if it s just a software problem. In addition you didn t post information on your Windows installation, which makes more complicated history.

    But if I understand you correctly, you can boot into safe mode without problems, right? Well, that would mean he s a driver or software issue because in safe mode no drivers will be loaded (just the standard Windows drivers).

    If you run the pre-installed Windows version, you should try to reinstall Windows from the HARD drive recovery function. You know about it?
    If this is not the case, see your user manual. A lot of information, you can find on this nice feature. :)

  • Constant problem "Not responding" after downloading the latest version of Adobe Reader.

    Original title: problem Constant 'is not responding.

    I have Windows Vista Home Premium edition: processor-1, 80 GHz; RAM - 1, 00 GB; System Type 32-bit OS.  Began to experience "Not responding" problem after I downloaded the latest version of Adobe Reader.  I get him unresponsive on the top of the page regardless of what software I'm working with or browse the internet.

    Hi Lagin,

    What is the complete error message you get?

    Since you are facing problems after downloading the latest version of Adobe reader, you can try to uninstall the same and check.

    You can check the following links and check.

    Uninstall a program

    Known issues | Acrobat X, drive X

    If you are not faced with the question, you could get in contact with Adobe's Support for assistance.

    Adobe support

  • Program not responding Message

    I visited a website Google identified as an "attack Page" and warned it could harm your pc. I descended and tried the site again a few days later with a different browser that does not give me the error message.

    Now my Outlook is locking up and gives me an error message saying "the program does not ' and my only option is to shut down the computer manually.

    I tried several viruses and spyware analyze programs and a few items have been cleaned, but the problem persists.

    I tried to uninstall Outlook and then replace that seems to work, but I lost my contacts and many important emails.

    A friend suggested that if Outlook is now stable that I could just import my contacts from my pst file corrupt which is where I think the problem lies. He said that if I have a worm it would be in the e-mails, but since I import me contacts only, it should be OK.

    The idea seemed great, but guess what? I think I got my computer reinfected because "program is not responding" is back.

    Someone at - it ideas? The attack Page Warning mentioned a virus "Blue alcohol" and a few others.

    Someone at - it a program that can clean the virus blue alcohol or have other ideas of what I can do to restore my system?

    It drives me crazy! I worked on my pc for 5 days now!

    Hello

    Method 1:

    To check if the problem is actually caused by the virus, you can configure your computer to clean the start State and check if any third-party application is the cause. To configure your computer to clean boot follow the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Method 2:

    You can use him below given links to search for online infections.

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Microsoft.com/security/malwareremove/default.aspx

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • A1 to screen sometimes is not responding or typing the letters double

    Hello

    My A1 sometimes gets in a State where certain areas of the screen, especially in the Launcher, are block and do not respond to taps. Or when the keyboard is open a lot of letters become anael double typing becomes something like this "HHeere iiss some tteexxt '. This is independent of the Launcher or the keyboard that is used.

    Anyone who sees this too?

    This seems to have resolved for now. I'll keep an eye on it and see if it comes back.

  • BlackBerry Smartphones not receive messages from the Facebook Application

    Hello

    I do not receive messages sent to me on Facebook for my Facebook for blackberry application Inbox

    1. I uninstalled and reinstalled the application.

    2. I have searched the site, but had no luck so far.

    3. I tried to change my e-mail where I get my notifications.

    4. I have not found many other users on this forum similar problem.

    Help, please!

    Thank you

    Rohan.

    Somehow, it seems that the problem was occurring when I got my hotmail account set up to receive facebook notifications and my hotmail account configured to deliver messages to my "BOLD".

    When I associated with my gmail acc facebook for what email setup for blackberry has been done already, it seems to work properly since.

    Thanks for the reply.

    Rohan.

  • After delete: 'branch to the page identified by the element' not playing Message from treatment and do not return to correct Page

    Hi all

    I have reproduced it on APEX.  workspace VRS 291 pages 9-application report, 10-form test/test.

    I'm using a branch of type creates a branch to the page identified by the element . I do I selected "Message Processing" when I select it. However if I go to the report on page 9. Click to go to page 10 on a record... (getting P10_Calling_page at the same time.) : when I delete the records in two things happen incorrectly:

    (1) it does not refer to the page calling it. It goes back to page 1. (the same as in my application)

    (2) when it arrives on page 1 it shows not all processing of the message.

    If I change the direction of a standard... (currently on page 10 to condition never)... then I get a message to process, and it goes to the page defined in the branch...

    It makes no difference if I set the State of the button on the branch...

    I don't know if this is a bug, or Ive missed something, but if someone could take a look and check...

    Rgds

    It seems that the message of the process if the value of the element has the value and management goes to the correct page.

  • Mail vip list does not display messages from all mailboxes

    When I first put in place, I remember having the option to display the messages in all mailboxes - a really useful facility VIP. Recently, I noticed that most of my personalities was empty, but the messages were still there in their individual files. I followed the advice of aid to click Sort by Date, and then choose 'all the mailboxes' but this option does not appear. Moving messages of certain dignitaries other files back to Inbox makes it immediately visible in the Vips. So now, if I want my VIP lists for any use I leave everything in my Inbox, which is just chaotic and defeated the object to have folders for businesses, etc. It's only happened recently - it is connected to an upgrade or something similar, I wonder?

    Hi Boxmakermichael,

    Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with mail. If you encounter problems with the function of VIP mailbox in Mail, you can find the information in the following articles useful:

    Address postal (El Capitan): search for messages from senders of VIP

    Mail (El Capitan): Mailboxes clever use to organize messages

    By default, the built-in VIP mailbox only checks emails from VIP which are currently in the Inbox, not in other boxes to letters or records either locally on the server. If you have e-mail set up a rule to move emails from specific VIPs in their own folders (or are moving them manually), it is probably why you don't see them in the VIP mailbox and why they reappear when you your choice in the Inbox.

    See the 'All the mailboxes' option "Sort by Date", you must select the individual mailbox the VIP under "VIP".  If your VIP example is 'Joe', select the 'Joe' mailbox then you will see the option "all the mailboxes.

    If you don't want not organized these emails in separate folders and view them all in a folder of VIP, however, there is a fairly simple solution. As mentioned in the article above, the integrated VIP mailbox is simply a mailbox smart who is set to pick up the mail of VIPs in your Inbox. While you can't change the settings of this particular mailbox, you can create a new box smart letters (called, for example, 'VIP'), where the only criteria is "Sender's VIP", without any limitation on the message tracking. This should then display all of your emails from senders of VIP, regardless of what box mailbox or a folder they are in. I hope it's useful and please let us know how it works.

    See you soon

Maybe you are looking for