Not sleep anymore after update 10.11.6

Similar Questions

• MY ipad has not automatically closing after update to ios 10

  MY ipad has not automatically closing after update to ios 10

  Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

• Flash CC not dΘmarre after update

  Flash CC not dΘmarre after update. He said 'En zelfstudie training' (training and auto-stufy in Dutch) for the update.

  Everything worked fine before the update, now, if I try solo start Flash,.

  It is said: 'Flash works niet meer' (Flash has stopped working) and closes.

  As you can probably message, I am on Windows 7.

  Now here's something interesting: if I double click on a previous film, then Flash starts well and load the previous movie.

  However when I close it and the screen that should appear is the 'new film' dialogue, flash crashes again.

  So obviously something was not install the new update, or the update does not work properly.

  I'm working now with my pre version of flash5.5 cc, I have re-installed to avoid crashing flash whenever I close a file.

  My questions:

  1. where can I connect this problem? (Or am I in the right place?)

  2 can I re - install the previous version, what worked well? (I can live without tutorials etc.).

  3. can try to re - install this version if the above is not possible and how do I do this?

  What fixed the problem for me was just to reinstall Flash CC. I thought I would give it a try, because I couldn't find a message from someone having the same problem.

  So I used the control panel to uninstall Flash, then I tried to reinstall.

  Creative cloud kept saying that Flash is updated, so you can not reinstall. If you click on the gear and choose Exit and then restart creative cloud it will take a few seconds, but we will see the situation as it is and you can reinstall Flash.

  After the relocation, the problem was gone.

  Thanks for the other solutions, I think that it is a practical resource to help reduce Flash if I ever need

  and gives me more confidence in the creative product of cloud.

  Maybe Adobe will pick it up and make it easier for us "normal" users to creative-cloud of

  Choose the version we want. As you can do in CVS systems.

• Can not delete emails after update to Thunderbird 31.2.0

  After update for Thunderbird Version 31.2.0 today, I'm not able to delete emails. Just nothing happens. Even the folder "Papierkorb" disappear. Can anyone help?

  Try to rebuild the troubled folder index file.
  Right click on the file - properties - file Repair

• not strong enough after updating iTunes

  Hello

  After updating iTunes yesterday, itunes is not as strong as before; of course, I changed volume in the menu bar as well as in volume ('her') maximum system configuration. If I use VLC, the volume is OK; Therefore, I don't think it's a problem of speakers of the Mac and iTunes.

  Thank you very much for your help

  Haperic

  Hello Haperic!

  From what you have posted, the sound after update of Mac is not as strong through iTunes but is fine using VLC or other applications. We certainly have to check a few things with the volume.

  If you haven't done so already, we'll leave iTunes in the menu next to the  iTunes when iTunes is active. Then quit iTunes.  Or command + Q on the keyboard.  Open later and try to play a few things after.

  No change after that, then go ahead and restart the Mac and try again, please.

  If it's still the same after the restart, then we'll reset the NVRAM/PRAM memory.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM

  1. Stop your Mac.
  2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
  5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
  6. Release the keys.

  After resetting the NVRAM, you may need to reconfigure the parameters of the speaker volume, screen resolution, selection of boot disk and zone information.

  I hope this helps.  See you soon!

• IPad 2 could not be activated after update ios 9.3

  I can't activated my iPad2 after updating ios 9.3

  I'm having the same problem and don't have a clue what to do.  It shows just connect my iPad to iTunes to activate it, but how do I do that if I can't go to iTunes?

• Photo Downloader doesn't show any thumbnails anymore after update to yosemite

  With cc 2015 photo downloader

  I don't see any thumbnails anymore after the upgrade to yosemite

  Hi JANSTRAGIER

  Could check you the version of Camera raw that you use Bridge

  Go to Edition > Camera raw preferences and see what version of camera raw, you're running?

  Also is you can open these pictures in Photoshop CC (if installed)?

  

  You can also try resetting Bridge preferences

  • Bridge to Reset preferences:-press and hold the CTRL, ALT, Shift (Windows) Command, Option, Shift (MAC) during the start-up of bridge and make check on reset preferences and purge the cache, and then click Ok

  

  Let us know if this helps

  ~ Assani

• Apps not to open after updating ios 9.3.2

  I've just updated my ios 9.3.2 software and everything, but one of my apps won't open. It's as if they have not yet been downloaded, but according to iTunes they are. The one app that works is the one I downloaded after upgrade to iPhone 6 s.

  Remove the application from your phone, and then reinstall the application.

• My C850 Satellite will not be closed after update Win8.1

  I hope I can get help from this forum. Since I've updated my OS from windows 8 for windows 8.1 as my laptop (Toshiba c850) refused to stop, the screen goes blank (power off dark, signaling), but still the power light stays on, had to make a forced turn off many times.

  Please help because I'm losing my mind.

  Hello

  In my opinion, something was wrong during the upgrade.
  This is not unusual since I have read in various forums on strange issue after upgrade Windows 8.1.

  I recommend you do following:
  Set the computer laptop back to factory settings. Recover the laptop Windows 8
  Updated 8 Windows to the last State (all updates, patches must be installed)

  Then check the windows 8.1 upgrade information page http://www.toshiba.eu/innovation/generic/windows8_1-message/ and follow the step by step instructions that contain also the facility of 8.1 and tools Windows drivers in the correct order!

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Tecra S11-14 t - Windows is not go further after updates

  Hello
  Tecra S11-14 t
  Two times the same problem. Problem after installing updates Windows 7 x 64 d Description of the problem: after installing six update - restart windows - after entering the password to login as an administrator - I... Hmmm... does not further!
  Withdrawal of previous state wines - does not help, same problem. After that installation of the hidden partition on the HDD is ok, then instantiated windows update and again the same problem!
  I suspect that some sort of update is in conflict with a program of the factory. Technical Microsoft said there are no other entries with the same problem.

  How to check the update does it hurt? The method of manually select and install the update will last forever.

  Hi biuro,.

  Can you start the laptop in safe mode and connect to Windows? It would be important to know if works at least in safe mode or not.

  Is it so if you install Service Pack 1 for Windows 7 before I start with a few other Windows updates?

• K3 Note sound camera is not turning off after update of Marshmallow

  After the update of the marshmallow sound camera my k3 note Sutter's not turn off... Even in silent mode, it sounds very strong.
  Someone knows how to turn off the sound.

  Note from the admin; phone added to the subject type

  When using your camera, simply turn on the option of DND and the shutter sound will be silent.

• LaserJet M1132: LaserJet M1132 deleted and could not be installed after update latest version 10 of Windows!

  3 days ago 10 Windows installed in my computer suddenly updated. After the update and reboot my PC, Wndows 10 deleted my laserjet m1132 system completely! And now I can't install it again, cause Windows 10 says that my printer driver is 'suspect' and it will be disabled instalation! Auto-detection of the companions of the local HPSupport site do see no printer connected to my PC completely! And PC does not say that all the new devices were connected. WHAT SHOULD I DO?

  Hey @fliperUA,

  Welcome to the HP forums!

  I see that your Laserjet M1132 will not be installed on your PC Windows 10. I can help with that.

  To install the drivers, we will do the following:

  1. If you have the USB cable connecting the printer to your computer, then remove it.
  2. Uninstall all the software your system associated with the printer.
  3. Disable all firewalls, antivirus, ad-blockers and similar programs on your PC.
  4. Download the latest drivers for your printer by clicking on this link.
  5. If the installer asks you to insert the USB cable then plug the cable at the time.

  This should allow you to install the drivers for your printer. If it does not then please let me know what error messages you see now and I should be able to help more.

  I hope this helps and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• OptiPlex 990 not PXE boot after update Bios A18

  After the update to A18 on multiple machines, I noticed that they all hang after address DHCP is affected and what would normally be the menu timer (if it was not all work in progress) or launch from the boot of automation.

  I also noticed when you update to the latest version on our Latitude E6420s so.  Returning to the A17 on the 990 and the 6420 corrects this problem.

  Is anyone else having this problem, and this Signals to Dell.  I tried to Google this but any how, I wrote the search I can't find anything with recent BIOS.

  Hello Irios103,

  It is difficult to determine what is causing the conflict with Bios version A18 and your systems. The improvements to the code may be the cause of problems on Cisco switches or oldest feature, such as the tree covering weight or the characteristic power of conservation.  You can also make sure the quick port is enabled.
  If you do not need specific to this version of Bios patches, it may be better to not use it.

  Improvements & fixes for version Watch:
  1 address system does not meet the keyboard intermittently.
  2. address UEFI OS fail boot with this disk number HARD password.
  3. questions of CCTK.
  4. improve the compatibility of PCI devices and USB devices.
  5 Update Microcode Intel SandyBridge processor.
  6 update Intel PXE ROM.

  I hope this helps.  Please let us know if you need further assistance or more information.
  ~ Maureen
  #iwork4dell

• BI server do not get up after updating GUID

  Hello

  Need urgent help...

  I can't connect to Analytics, then tried to update the GUID in accordance with the Oracle documentation:

  1. made of changes in the file NQSConfig

  2. because of changes in file instanceconfig

  After these changes, when I tried to restart all services using the command line, all services except the BIServer is running.

  When I went back the changes to the NQSConfig file, all services are rising, but am unable to connect to Analytics.

  I use 11.1.1.7 version.

  I have returned the error of em logs, but am unable to do anything in the newspapers...

  Error:

  Message [13026] Error getting BI Security Service roles: "an error was received by BI Security Service: oracle.bi.security.service.SecurityServiceException: SecurityService::validateSystemUserCredentialsThe system user could not be authenticated.' "

  Message [nQSError: 43146] FMW_UPDATE_ROLE_AND_USER_REF_GUIDS inside the NQSConfig.INI is set to Yes, but the server could not connect to the Security Service of BI

  Anyone can guide me please in common sense as what to do?

  Date of arrival:

  1. Deployments on weblogic server are active (Console of Administration Weblogic or EM)
  2. All bi components run (status opmnctl or EM)
  3. bisystem password stored in the credential store is valid (for details http://docs.oracle.com/cd/E23943_01/bi.1111/e10543/troubleshoot.htm#CHDGICEH)

  PS

  Attach the newspapers NQServer.log and bi_server for the investigation.