Nothing display upward in the main viewport CS6 (64-bit) - PC

I can open Photoshop very well, all buttons work. I see everything I do in the thumbnail preview of the layer, but all I see on the main screen of design is the background "transparent." The slider appears and looks the part of what brush I use, but nothing happens on the main screen. I don't even have the ability to use this version yet because I don't see anything! Help, please!

This is the general direction I was headed with the OpenGL (OpenCL in your case), but it was slow catching on, until I found this other thread.

Good luck

Hunt

Tags: Photoshop

Similar Questions

  • Why desktop screen display upwards on the left side of the monitor screen and white is on the right; Properties show nomal.

    Why desktop screen display upwards on the left side of the monitor screen and white is on the right?  When I do my office they show nomal properties.  Everything seems to be normal.  Thank you

    Hi Sdaugherty3,

    Follow the methods below:

    Method 1: Try to change the resolution of the screen and check the results.

     

    To change your screen resolution

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

    Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

     

    Resources for troubleshooting problems in Windows XP

    http://support.Microsoft.com/kb/307960

    I hope this helps.

  • The Subvi display plot in the main VI while Subvi is inside another Subvi

    Hi all

    I followed the procedure described by mysticfree to display a Subvi plot in the main VI: http://forums.ni.com/t5/LabVIEW/show-graph-that-is-created-in-a-subvi/td-p/672249

    I want to do nested way: main VI runs a Subvi called sub_A tracks sub_A. other sub - VI, called sub_B in it. sub_B generates a trace. I want to display this conspiracy in my main VI.

    I tried to apply the same principle to this problem, but sub_A does not send trace information to mainVI until sub_B is finished.

    I'd appreciate any suggestions to solve this problem.

    I have attached the VI.

    Thank you.

    The solution to this problem is available in the following discussion:

    http://forums.NI.com/T5/LabVIEW/show-graph-that-is-created-in-a-subvi/m-p/2390892#M741487

  • data displayed only in the main table not shown in the child table

    I have two tables: master and child. In the main table, I want the first line of the main table must be selected and child records to be displayed when the page is displayed. But the page shows only the master records.

    The code written in the process in the controller application is:
    TheAM OAApplicationModule = pageContext.getApplicationModule (webBean);

    Table OATableBean = (OATableBean) webBean.findChildRecursive ("region1RN");
    Boolean ExecuteQuery = BooleanUtils.getBoolean (false);
    [Serializable] parameters = {executeQuery};
    Class [] paramTypes = {Boolean.class};

    theAM.invokeMethod ("init", parameters, paramTypes);

    the code written in AM is:
    public void init (Boolean executeQuery)

    {


    TXN OADBTransaction = getOADBTransaction();
    MTHSustainAspectsVOImpl vo = this.getMTHSustainAspectsVO1 ();

    Line masterRow = vo.first ();
    masterRow.setAttribute ("SelectFlag", "Y");
    vo.executeQuery ();


    }

    can someone tell me why the child records don't come

    Change the code as follows and try

    public void init (Boolean executeQuery)

    {

    TXN OADBTransaction = getOADBTransaction();
    MTHSustainAspectsVOImpl vo = this.getMTHSustainAspectsVO1 ();

    Line masterRow = vo.first ();
    masterRow.setAttribute ("SelectFlag", "Y");
    vo.executeQuery (); Not necessary
    vo.setCurrentRow (masterRow);

    }

    Prasanna-

  • How can I get media player to go was the task bar so I don't have to keep opening upward on the main screen please?

    I just had to recover my pc but now I downloaded the media player 11, but it is more on my taskbar as before. How to do this please.

    Hello

    I suggest you follow the step and check if it helps.

    a. right-click of the mouse on a zone empty of the taskbar.
    b. in the menu that appears, click Toolbars and then click Windows Media Player.
    c. then the Windows Media Player and then reduce it.
    d. the main control buttons appear on the taskbar. You can start playing, go to the next or previous song, pause and so on.
    e. the software in large format, click on the little logo of Windows Media Player.

    See also:

  • How Smartphones blackBerry display appointments on the main window

    How can I upgrade my curve to always view the activities of days in my calendar on the main screen?  I just downloaded a theme that does it automatically, but I don't know how to do with the theme.  Help please?

    Without the theme that you can not

  • When Firfox is open I have two screens / window, so a thiner screen upward and the main screen downstairs, the cursor and follows him into two screens, so the top it scrolls, how do I get rid ot the zipper extra screen?

    Windows 7, on the top of the Tower, problem as stated above.

    Try Firefox Safe mode to see how it works there.

    A way of solving problems, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
    • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

    Do not choose anything at the moment, just use 'continue in safe mode.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

    If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.

    http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

    When find you what is causing that, please let us know. It might help others who have this problem.

  • C:\Progra-1\MYWEBS-1\bar\1.bin\M3PLUGIN. DLL error code continues to display upward while the pc starts

    I did the security scans and it shows that it is clean.

    Check out all these links. Also, you can reinstall it (no matter if it is running), then use
    Revo Uninstaller to remove it.

    Revo Uninstaller - Free Version
    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Panels and toolbar not displayed upwards at the opening of the files.

    I just started using Photoshop yesterday, and when I started opening new files there would be a toolbar on the left side and 3 panels to the right. After the opening of these same files today, the toolbar on the left has disappeared and there is only a single panel that says "libraries." In addition, it is only let me zoom in and out of the picture. I figured out how to fix it by going to window > > > Workspace > > > Essentials, but why start doing unexpectedly and how to reset so I have always not to adjust it manually.

    Hi cameronp,

    Please follow the steps below to disable the workspace of beginning

    1. Select Preferences > General.
    2. Deselect Show Start Workspace when no document is open.
    3. Restart Photoshop and verify that the problem.

    Let me know if it helps.

    ~ UL

  • OAF, used with the clausule setWhereClause display object, show the error not correctly initialized.

    Hi all,

    I'm new with ofa and AM mi to VO that I use to find the information that is displayed to the user on a region of the query, after the user has pressed the button go demand CO AM tho load VO both use this information to display in a popup region to display and update. the main problem is the closing of popup region it send a shipment to the server one appears the error "View object may not be correctly initialized during update."

    The main page and the pop-up window uses the same AM, the initM2mVo() and initTavleVo() are called by processRequest of the main PG CO, the popup dosen´t have a CO.

    This AM using PG main and in the region of popup

    package tasc.oracle.apps.tasc.m2m.imei.server;


import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.server.OAViewObjectImpl;


import oracle.jbo.Row;
import oracle.jbo.ViewObject;




// ---------------------------------------------------------------------
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
// ---------------------------------------------------------------------
public class ActualizarImeiAMImpl extends OAApplicationModuleImpl {
    /**This is the default constructor (do not remove)
     */
    public ActualizarImeiAMImpl() {


    }


    /*******************************USE FOR CUSTOM CODE****************************/


    /******************************************************************************/


    /**
     * Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
     * @param taskNumber
     */
    public void loadImeiVo(String taskNumber) {
        OAViewObject voTableQry = getTableQryVO1();


        if (voTableQry != null) {
            voTableQry.reset();
            voTableQry.setWhereClause(null);
            voTableQry.setWhereClauseParams(null);
            voTableQry.setWhereClause("TASK_NUMBER = :1");
            voTableQry.setWhereClauseParam(0, taskNumber);
            voTableQry.executeQuery();
            if (voTableQry.hasNext()) {
                voTableQry.next();
                String idActuacion =
                    (String)voTableQry.getCurrentRow().getAttribute("IdActuacion");
                String dsM2m =
                    (String)voTableQry.getCurrentRow().getAttribute("DsM2m");
                String imei =
                    (String)voTableQry.getCurrentRow().getAttribute("Imei");


                if (idActuacion != null) {
                    OAViewObjectImpl m2mVo = (OAViewObjectImpl)this.getTascTransEqInstM2mVO1();
                    m2mVo.reset();
                    if (!m2mVo.isPreparedForExecution()) {
                        m2mVo.setMaxFetchSize(0);
                        m2mVo.executeQuery();
                    }                  
                    m2mVo.setWhereClause(null);
                    m2mVo.setWhereClauseParams(null);
                    m2mVo.setWhereClause("ID_ACTUACION = :1 AND DS_M2M = :2 AND IMEI = :3 ");
                    m2mVo.setWhereClauseParam(0, idActuacion);
                    m2mVo.setWhereClauseParam(1, dsM2m);
                    m2mVo.setWhereClauseParam(2, imei);
                    m2mVo.executeQuery();
                    if(m2mVo.hasNext()){
                        m2mVo.next();
                    }
                 }
            }
        }
    }




    /**
     * Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca
     * el  IMEI seleccionado.
     */
    public void loadImeiValuesList(String taskNumber) {
        ViewObject viewobject = this.getImeiListVO1();
        OAViewObject voTableQry = getTableQryVO1();


        if (voTableQry != null && voTableQry.getCurrentRow() != null) {


            String imeiType =
                (String)voTableQry.getCurrentRow().getAttribute("Attribute17");


            if (viewobject != null & imeiType != null) {
                viewobject.setWhereClause(null);
                viewobject.setWhereClauseParams(null);
                viewobject.setWhereClause("TASK_NUMBER = :1 AND ATTRIBUTE17 = :2");
                viewobject.setWhereClauseParam(0, taskNumber);
                viewobject.setWhereClauseParam(1, imeiType);
                viewobject.executeQuery();
           }
        }


    }
    /*******************************USE FOR CUSTOM CODE****************************/
    /******************************************************************************/


    /**Container's getter for TableVO1
     */
    public OAViewObjectImpl getTableVO1() {
        return (OAViewObjectImpl)findViewObject("TableVO1");
    }


    /**Sample main for debugging Business Components code using the tester.
     */
    public static void main(String[] args) { /* package name */
        /* Configuration Name */launchTester("tasc.oracle.apps.tasc.m2m.imei.server",
                                             "ActualizarImeiAMLocal");
    }


    /**Container's getter for TascTransEqInstM2mVO1
     */
    public OAViewObjectImpl getTascTransEqInstM2mVO1() {
        return (OAViewObjectImpl)findViewObject("TascTransEqInstM2mVO1");
    }


    /**Container's getter for ImeiListVO1
     */
    public OAViewObjectImpl getImeiListVO1() {
        return (OAViewObjectImpl)findViewObject("ImeiListVO1");
    }


    /**Container's getter for TableQryVO1
     */
    public OAViewObjectImpl getTableQryVO1() {
        return (OAViewObjectImpl)findViewObject("TableQryVO1");
    }


}

    It's the CO of the main PG

    /*===========================================================================+
|   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
|                         All rights reserved.                              |
+===========================================================================+
|  HISTORY                                                                  |
+===========================================================================*/
package tasc.oracle.apps.tasc.m2m.imei.webui;


import java.io.Serializable;


import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean;




/**
* Controller for ...
*/
public class ActualizarImeiCO extends OAControllerImpl {
    public static final String RCS_ID = "$Header$";
    public static final boolean RCS_ID_RECORDED =
        VersionInfo.recordClassVersion(RCS_ID, "%packagename%");


    /**
     * Layout and page setup logic for a region.
     * @param pageContext the current OA page context
     * @param webBean the web bean corresponding to the region
     */
    public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
        super.processRequest(pageContext, webBean);


        //get the handle to AM Attached to our Simple Page Region MainRegionRN
        //The page is passed as parameter to this method, hence we can get handle
        //to the AM quite easily
        OAApplicationModule am = pageContext.getApplicationModule(webBean);


        //verifica si la transaccion de creacion esta activa todavia
        if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext,"ActualizarImeiM2m", false))
        {
            // deshace cambios y finaliza Txn
            am.invokeMethod("rollback");
            TransactionUnitHelper.endTransactionUnit(pageContext, "ActualizarImeiM2m");
        }

    }


    /**
     * Procedure to handle form submissions for form elements in
     * a region.
     * @param pageContext the current OA page context
     * @param webBean the web bean corresponding to the region
     */
    public void processFormRequest(OAPageContext pageContext,
                                   OAWebBean webBean) {


        super.processFormRequest(pageContext, webBean);


        //get the handle to AM Attached to our Simple Page Region MainRegionRN
        //The page is passed as parameter to this method, hence we can get handle
        //to the AM quite easily
        OAApplicationModule am = pageContext.getApplicationModule(webBean);


        //Detección del botón go de la región de query.
        this.queryButonGO(pageContext, webBean, am);


        this.updateImei(pageContext, am);


    }


    /**
     * Detección del botón go de la región de query
     * @param pageContext
     * @param webBean
     * @param am
     */
    public void queryButonGO(OAPageContext pageContext, OAWebBean webBean,
                             OAApplicationModule am) {
        OAQueryBean queryBean =
            (OAQueryBean)webBean.findIndexedChildRecursive("QueryRN");
        String idGo = queryBean.getGoButtonName();
        if (pageContext.getParameter(idGo) != null) {


            String tareaId = pageContext.getParameter("TaskNumberLovInput");


            //Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
            Serializable[] parameters2 = { tareaId };
            Class[] paramTypes2 = { String.class };
            am.invokeMethod("loadImeiVo", parameters2, paramTypes2);


            //Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca  el  IMEI seleccionado.
            Serializable[] parameters = { tareaId };
            Class[] paramTypes = { String.class };
            am.invokeMethod("loadImeiValuesList", parameters, paramTypes);
        }
    }
  
    public void updateImei(OAPageContext pageContext, OAApplicationModule am){
        if (pageContext.getParameter("ActualizarImei") != null){
          
            String imei = pageContext.getParameter("ImeiPopup");
            //TODO......
        }
    }


}

    Thank you all.

    I thing I got the problem.

    I have the following configuration:

    • A Home Page and external RN which is call as popup in the homepage
    • 2 VO, java code queries, one to capture information that is used to query the VO 2 that I use to update the information in the pop-up window.
    • 01:00, this is the card only in the main Page. (Initially, I had mapped to AM even external RN as the main PG, but I take it off).

    The solution was to remove the mapping of the AOS of the outer region and in the messageimput of the whole of the outer region of the instance of the view and the view attribute manually in this field (http://screencast.com/t/uDTALEedCh do not use the Wizard) that one instantiation am AM, so the problem, it seems that was that defining an AM in the outer region create a new instance , causing that he cannot see the information I manually load in the t by request it them.

    in this case there is no need to use the following code, because the lines are responsibility of the query information in the java code, it must only be made when inserting a new line.

        public void initM2mVo(){
        //get a handle to the View Object that we wish to initialize
        OAViewObject vo = (OAViewObject)this.getTascTransEqInstM2mVO1();
        if (!vo.isPreparedForExecution()) {
            vo.setMaxFetchSize(0);
            vo.executeQuery();
        }
        //Create a blank Row
        Row row = vo.createRow();
        //Attach that blank row to the VO. Data will be fed into this row, when the user types into the fields
        vo.insertRow(row);
        //Set the status of the blank row to initialized. This tells OA Framework that record is blank and must not be included in DML
        //Operations until    changes are made to its underlying VO [via screen fields]
        row.setNewRowState(Row.STATUS_INITIALIZED);
    }

  • the main method overload

    Hi all

    If the main method can be overloaded so why it doesn't work?
    class Passreference{
void pass(){
                Oops7.main(new String[]{"Apple","Windows"});
     Oops7.main(new int[]{10,20});
     }
public class Oops7 {

     public static void main(String[] args) {
System.out.println("String"+"\t"+args);

     }
public static  void main(int x[] ){
     System.out.println("Integer"+"\t"+x);
}
}
    The answer is: String [Ljava.lang.String;@addbf1

    1. it is not print the values that I'm passing

    2. same as if the integer values are passed is gives String [Ljava.lang.String;@addbf1
    Why not"Integer java.lan... »

    Thanks in advance,
    CAT

    Popular cat's paw wrote:
    Hello

    The concept of overload is class that contains the same method but different values of parameter names (it may not of parameters, the type or whatever it is). In this case if she calls only String() (if we as integer values), main method is really overloaded?

    The main method can be overloaded Yes, as you did in your code. But the main method is a bit special, so it would be stupid to overload.

    Also, no matter how much you surchargerez the main method, hand (String [] args) we're the only one who will be managed by the JAVA virtual machine.

    You could test it in this way.

    public static void main(String[] args) {
    // This is the entry point to your program _always_
    main(new int[] {1, 2, 3});
    main(1, "string");
}
public static void main(int[] args) {
    System.out.println("I got integers.");
}
public static void main(int i, String s) {
    System.out.println("I have an integer and a String");
}

  • I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

    I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

    I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

    I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

  • Satellite L670D-103 - nothing displayed on the screen

    Hello, please help, my laptop does not start!

    When I push button 'ON', there is nothing displayed on the screen, but the fan is running, the lights are on except the HARD drive light. The motherboard seems to be ok then, but there screen is always black! For your information, my HARD drive is nearly full (319, 8 GB / 320 GB) and I did not create Toshiba recovery disc

    What is a screen or an OS problem, and how can I fix it? The screen display depends on the OS to start and the screen won't work if the OS is recovered?

    Thank you
    Concerning

    Hey,.

    Theoretically, it could be a malfunction of the card Mother poster to find this point connect an external monitor to your laptop and if the internal display is faulty, you should see something on the screen. Otherwise another part is at the origin of the problem.

    This problem has nothing to do with the HARD drive. Even without disc HARD is installed you should see the screen of the Toshiba BIOS at least.

    Why you have not created the Toshiba Recovery disk?
    The recovery disc can restore the factory settings on the HARD drive, but in this case it will not help you. Recovery disk is only software (Windows).

  • How can I display a variable evolution in a Subvi on the face before of the main vi as the Subvi is excuting

    In the attached document the vi on the right is sub to the vi on the left. On the Subvi on the right of the variable "playing field" is continuously updated on the façade of the Sub - VI as the loop 'for' is executed, but only the last value of the variable is updated in the table main before vi which is what is expected. My question is how can I display the evolution of the value of 'Playing field' on the main façade of vi that the loop 'for' in the Sub - VI is running?

    Thank you.

    I don't have the drivers you are using. But here's an example of how update an indicator of a Subvi. To create the reference control in the Subvi, select control refnum in refnum palette and drag a numeric (or other) on the refnum control.

    VI the appellant

    Subvi

  • My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

    My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

    Brand: HP
    Type: laptop
    Model No.: Pavilion zt3000
    512 MB DDR1 RAM
    Thank you very much!

    Hi Dominic,

    Are you able to get into BIOS to make changes?

    If so, you can try to reset the default settings of the BIOS and check.

    NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

Maybe you are looking for