Notification of update of the system

Similar Questions

• Windows Update blocks the system off, it

  I shut down the system, while it has been updated of the system (Microsoft Update). Now it crashes, saying that this update no. 11 of 13 is busy

  What should I do?

  The operating system is windows 8.1

  The system should be able to launch an auto repair.

  First you must do a full stop down to Win 8.1 as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  After that, you must restart the laptop... Usually the system would start an auto repair procedure that should solve the problem of update.

• Can I download and install some updates of the system?

  Here, it shows updates of the system are old and it shows the old version I have and it also shows the new version, so must I download the new version and download & install over versions old or not?

  * Pilot your worm last worm *.

  * USB-enhet (sammansatt) 6.1.7600.16385 NEW VERSION > 6.4.64.326 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2936 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - UPGRADE 2937 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2938 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2934 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2935 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2939 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB2 Enhanced Host Controller - 293 a 6.1.7600.16385 NEW VERSION > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB2 Enhanced Host Controller - 6.1.7600.16385 NEW VERSION > 8.3.1.1011 293C *.

  Where it is shown? What application will notify you of new updates?

• Switch 10 - Please wait while we install an update of the system

  Hello

  Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.

  I must have started the device about 40 times now, but it does every time.

  Windows updates are up-to-date and are therefore all updates from Acer.

  Any ideas on how to stop this happening?

  Thank you

  Cory,

  Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).

  Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.

  Thank you for the support, now my switch behaves as expected.

  See you soon!

  Hubert

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• Update of the system - will never spent 15%

  ThinkPad Edge E431; Windows 8.1

  I run Center solution and then system-> software updates. I then start the update of ThinklVantage system 5. It opens and when I start it, it goes for updates to the agent and stops @ 15% full not saying no applicable on the system package, it's whenever I do this. What prevents the update of the system function?

  THX

  I finally fixed it. I've been to download and re - install system update (after 5 attempts at installation). He now works and integrated into the solution Center.

• Never had a notification of updates since the beginning...

  Never had notification of updates from the creative clouds early, still have to find the direct download and do it manual.

  I deleted the Adobe AAMUpdater folder and restarted creative cloud and everything is back to normal, a new folder has been created by it self after reboot. Thank you for help ;-)

• Win 7 SP1 - update of the system 4 start

  Hello

  I have a problem with the update of the system on one of our ThinkPad customers.

  When I try to start it, the splash screen is displayed and the suservice.exe process is started, but then nothing happens.

  I followed some of the tipps, I found in this forum (disabled UAC, checked registry entries, and so on) but without success.

  The behavior has not changed - update system shows the splash screen (if I click on the start the application stops responding, if I wait for the splash screen disappears after about 30 seconds)

  I also uninstalled the previous installed version of system update and installed the latest version (http://www-307.ibm.com/pc/support/site.wss/MIGR-73695.html) with the support of SP1.

  It would be nice to get the system update working again because the customer is having a strange problem on his thinkpad - perhaps connected to lenovo apps that aren't updated (start of programs to minimize maximize randomly). Uninstalling the lenovo Toolbox has solved this problem for now, but I want to assure you that the system is up-to-date.

  System information:

  Lenovo Thinkpad T410s

  Windows 7 Professional 64-bit with installed SP1

  I also got some log files:

  SUService newspapers:

  Info 2011-03-23 , 10:55:38
      at Tvsu.Service.Server.PipeManager.HandleRequest(String request)
      Message: Installing under the service context
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.Execute()
      Message: /execute uncsetting.exe /arguments "" /directory C:\Program Files (x86)\Lenovo\System Update /type COMMAND
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.Execute()
      Message: C:\Program Files (x86)\Lenovo\System Update
  uncsetting.exe
  ""
  COMMAND
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: Directory 1: C:\Program Files (x86)\Lenovo\System Update
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: If directory 1 exists: C:\Program Files (x86)\Lenovo\System Update
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: The parameters directory and command stay as follows:
  command: uncsetting.exe
  directory: C:\Program Files (x86)\Lenovo\System Update
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: hide window: False
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Common.CommandExecutor.Executor.ExecuteCommand(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
      Message: 0
  
  Info    2011-03-23 , 10:55:38
      at Tvsu.Service.Client.CommandLauncher.ExecuteCommandLine(String command)
      Message: Command execution duration was: 667 Miliseconds
  

  tvsu_exe.log:

  TSS(R) 2: 10:43:58:0779 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:43:58:0783 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:44:34:0494 tvsu.cpp(518): StartTvsukernel : admin
  TSS(R) 2: 10:44:34:0496 tvsu.cpp(525): Begin InvokeUacSdkViaService
  TSS(R) 2: 10:44:34:0707 tvsu.cpp(370): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:44:34:0710 tvsu.cpp(405): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:45:22:0927 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:45:22:0930 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:45:23:0751 tvsu.cpp(518): StartTvsukernel : admin
  TSS(R) 2: 10:45:23:0752 tvsu.cpp(525): Begin InvokeUacSdkViaService
  TSS(R) 2: 10:45:24:0330 tvsu.cpp(370): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:45:24:0333 tvsu.cpp(405): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:51:23:0804 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:51:23:0804 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:54:35:0071 tvsu.cpp(1506): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:54:35:0075 tvsu.cpp(1527): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  TSS(R) 2: 10:55:38:0884 tvsu.cpp(518): StartTvsukernel : admin
  TSS(R) 2: 10:55:38:0886 tvsu.cpp(525): Begin InvokeUacSdkViaService
  TSS(R) 2: 10:55:39:0523 tvsu.cpp(370): Installdir:  C:\Program Files (x86)\Lenovo\System Update
  TSS(R) 2: 10:55:39:0524 tvsu.cpp(405): szCmd:  C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
  

  UACSdk.txt:

  TSS(L) 0: 10:44:35:0222 uacsdk.cpp(168): User: ADMIN
  TSS(L) 0: 10:44:35:0223 uacsdk.cpp(169): TempRegFile:
  TSS(L) 0: 10:44:35:0223 uacsdk.cpp(170): ComdLine:
  TSS(L) 0: 10:44:35:0224 uacsdk.cpp(178): ComdLine tvsukernel: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:44:35:0224 uacsdk.cpp(186): Vista admin
  TSS(L) 0: 10:44:35:0226 vista.cpp(62): StartUIOnVistaWithAdminLongon ComdLine: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:44:35:0226 vista.cpp(70): WTSGetActiveConsoleSessionId dwSessionId: 1
  TSS(L) 0: 10:44:35:0229 vista.cpp(74): WTSQueryUserToken failed!
  TSS(L) 0: 10:44:35:0229 vista.cpp(159): CreateProcessAsUser failed!
  TSS(L) 0: 10:45:24:0807 uacsdk.cpp(168): User: ADMIN
  TSS(L) 0: 10:45:24:0808 uacsdk.cpp(169): TempRegFile:
  TSS(L) 0: 10:45:24:0809 uacsdk.cpp(170): ComdLine:
  TSS(L) 0: 10:45:24:0809 uacsdk.cpp(178): ComdLine tvsukernel: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:45:24:0809 uacsdk.cpp(186): Vista admin
  TSS(L) 0: 10:45:24:0811 vista.cpp(62): StartUIOnVistaWithAdminLongon ComdLine: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
  TSS(L) 0: 10:45:24:0811 vista.cpp(70): WTSGetActiveConsoleSessionId dwSessionId: 1
  TSS(L) 0: 10:45:24:0814 vista.cpp(74): WTSQueryUserToken failed!
  TSS(L) 0: 10:45:24:0814 vista.cpp(159): CreateProcessAsUser failed!
  

  ServiceStart.log is empty

  A possible solution can be found here

  Note of the moderator; edited the link to open in a new window

• Why my wireless stop working after the last update of the system?

  My wifi worked perfectly before the last update of the system.  Now, it will not register, but a bar of signal and nothing works.  How can I fix it?  Makes unnecessary internet on TV, because I have not a wired connection is close.

  My TV is a model NSX-46GT1.

• Update of the system - the modules download error

  Hello everyone.

  I want to update my drivers by using update system, but I get this message:
  "Download error modules. Nothing else to explain what the problem...

  

  The program gets stuck on the Welcome screen, and I can't do anything other than exit.

  How can I do to solve the problem?

  I uninstalled and reinstalled "System update" after restarting the PC. I downloaded it from this link: http://support.lenovo.com/fr_FR/downloads/default.page?

  It's 3.16 system on Windows XP update.
  The PC is a R500 (product 2718WDS).

  Thanks in advance for your help.

  I have an idea. I saw a similar problem, where something in the network settings for DNS gets screwed up. As a workaround, that's what I did:
  For the network card I use, instead of using DHCP, a DNS server to use force. I used google's servers because I remember the addresses - 4.4.4.4 and 4.4.8.8. Run the system update. If this solves the problem, or if not, after having done it once, you can change it to use DHCP.

• AccessIBM and update of the system - BIG problem

  Several subscribers to the list of distribution of ThinkPad and members of the Support of the ThinkPad Forum, reported that when they press the AccessIBM they hear music play and see the window opens, with all its headers that appear, but does not show anything under the headings, and when they click on any of the headers that nothing happens.

  This same thing happened to me and I solved it by using Rescue and Recovery to restore my system to the State, he was until I installed the latest updates provided to me by the System Update ActiveX, and I pointed to the ThinkPad mailing list.

  One respondent suggested that the ActiveX updates could not be responsible for the problem, but I'm not the penalty to reinstall in order to prove that the opinion is neither good nor bad.

  
  

• HP Pavilion TS 15-n263TX: 10 Windows Update, restart the system in a very long time

  Hello

  I have problems with my laptop, after I installed the update of the operating system Windows 10. Once installation is complete, my system went into a "restart" and has not restarted in fact still. He has been on the color screen, with the white circle, loading wheel beside the word "reboot" for about 17 hours now and I don't know if I have to force down my system or just wait it out. Thanks for the help.

  Hello

  Thanks for posting in the Forum from HP Support.

  Well, 17 hours is too so obviously he has stuck. Unfortunately, there is no other choice than hard reboot (using the computers start button).  There seems to be no other option.

• How to know which update causes the system crash

  Can you tell us how to check the update is the culprit?

  Hi Steve,.

  Inorder to know which update is the cause of the crash of the system, you can install the updates one by one. Firstly uninstall the updates that have been recently installed.

  Uninstall the update:

  1. click on start and type "update installed" in the searc box. Click on view installed updates

  2. right click on the update you want to uninstall. Once the uninstall is complete, reboot the computer.

  3. install the updates one by one.

  You would get to know what update is at the origin of the disorder. You can hide this particular update.

• Cannot start Windows 7 after the update of the system

  I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:

  AMD 7750 dual-core 2, 7GHz
  4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
  ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...

  Here is the information about the error:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1026

  More information about the problem:
  BCCode: 116
  BCP1: 871F13D8
  BCP2: 90C204B4
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  F:\Windows\Minidump\080809-15375-01.dmp
  F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  F:\Windows\system32\en-US\erofflps.txt

  Here's the crash dump:

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.x86fre.win7_rtm.090713 - 1255
  Computer name:
  Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
  The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
  System Uptime: 0 days 0:00:19.343
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  .....

  Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Cannot update the 10 latest updates to the system

  When the system downloads 10 Vista software updates, it goes through all, but then, when it restarts I get a reboot error.  It cannot solve the problem, and I have to do a restore to an earlier date.  I tried several times to make the installation of the download, but whenever he fails.  How can I solve this problem?  Running on the Dell Studio XPS.

  Change your automatic updates to inform you.

  Download the updates one at a time, until you find the problem one.

  Do a restore again if the problem recurs, then repost with the number of the update.  Mick Murphy