Notification send Calendar invites when it should not

A friend wrote just for me "I just got 40 notifications of calendar on your part, a lot of dates in the past." The same person also received an invitation to the event calendar a couple of days for an event that my schedule did not show that everyone had been invited to. A few months earlier, another friend told me that she has received invitations to events calendar for someone else. What is happening and how to fix it?

I have OS X El Capitan (10.11.4)

I only intended to correct the version of operating system, this is NOT RESOLVED!

How you uncheck resolved?

Tags: Mac OS & System Software

Similar Questions

EXECUTE IMMEDIATE throws exception NO_DATA_FOUND when it should not

Hi all

I wrote an anonymous PL/SQL block that, on paper, should be OK, but one of its commands EXECUTE IMMEDIATE is runnning slowing prematurely and throw an exception NO_DATA_FOUND, when it should not because I know that there is data in the table.

Here is the line that I suspect is out of steam after 8 attempts:

---
immediately execute "INSERT INTO ple101.circular35 (ID, SLAVETABLEID, SLAVEITEMID, MASTERTABLEID, MASTERITEMID, PRO) (SELECT * FROM SLAVETASKS where mastertableid =' |)" subTableID | "and masteritemid =' |" subitemID |' and subtableid =' | mastTableID | "and SLAVEITEMID =' |" mastItemId |') ' ;
------

It is supposed to search the entire SLAVETASKS table for documents that match the WHERE clause, but gives up after 8 cycles.
Table SLAVETASKS got 10228 records.

The above statement (and the whole of the PLSQL block) is good in that it gets records if they are wthin the first 8 records in the SLAVETASKS table, but like I said after 8 records, to throw an exception NO_DATA_FOUND.

Published by: user10390960 on April 28, 2012 03:21

Published by: user10390960 on April 28, 2012 03:22

Published by: user10390960 on April 28, 2012 03:23

Published by: user10390960 on April 28, 2012 05:08

Hi Goofy,

The above script is for PLSQL and if you want to display the data in circular 35 follow like that

# Save the code below in the sqlscript for example. circular_process_display. SQL and run as

sqlplus /@ @circular_process_display.sql

-- CREATE TABLE circular 35
CREATE TABLE circular35
....
..
/

-- Execute PLSQL Block as given in my earlier post
DECLARE
...
BEGIN
...
EXCEPTION
...
END;
/

-- Run SQL to display output on screen.
SET SERVEROUTPUT ON SIZE 100000 FEEDBACK ON LINESIZE 200;

SELECT *
FROM circular35
/

{code}

MX920 printed in italics when it should not

I have a MX920. My computer using Windows 7. Occassioally, and apparently at random, a document will print with a wide range in italic, when it is not italicized in the program (Microsoft Word, for example). Small arrived in Word and pdf files. Strange, the italic is just for a full line; the front line and the after is normal. And even stranger is that sometimes it prints with italics tilted to the left (not right). Has anyone seen this? I susepct that is a printer problem, since it occurs in Word and Acrobat Reader.

Hi DestinLeB,

Although the problem seems to occur sporadically, an alignment of printhead on the printer may resolve the problem. To do this, please follow the steps on the below link:

Series MX920 PIXMA Algnment print head

I hope this helps!

It has not responded to your question or problem? Find more help contact us.

Go point overset text when it should not

InDesign CS Version 3.0.1 (2003) for Windows - I've been using this software on a desktop HP 5 days a week for about 2 years now, and I never had this problem before. (I'm not an expert). I have an 8 1/2 x 11 1/2 "of the margins, a box from 1 1/4" to the bottom of the page running at the bottom margin. I am typing, typing, typing, so I start a new paragraph about 2/3 down the page (anywhere near my bottom margin), full justification. At the end of the first line, while I'm typing I notice the text disappears for overset text. If I delete the part of what I typed just to bring the back line, and then press return at the end of the line (the one with the rest of the alpha, not in the number pad keyboard), the text remains on this page. Of course I shouldn't have hit back at the end of each line of type this paragraph. I have read several posts similar to this problem and no, this isn't my keyboard, I'm not on a laptop. I tried to reset my preferences, but it still happens. I looked at every possible setting I can think of and can't find anything strange. I compared my other documents the settings and they are all good. I do not use paragraph styles. I looked to attack, paragraph keep options hidden characters (no cracks appear) and story editor. I deleted half of the text in the text box and retyped it, but it still happens. I really want to recreate this entire document unless it is my last option, I want to know what the problem with it!
I zipped the document but I can't say how to attach to my post. I know nothing to put the document on a server so that people can see. If someone can tell me how to attach the file zip here (if you can) I will do. Or I'll send it to you. If not, does anyone have an idea how to solve this? What Miss me?

Yes, it's No Break applied to the whole line.

Send an email to iCloud - should not exceed the sending limit.

When sending email * address, receive the message I'm over issuing limit the size without worrying about the content of the e-mail.

Occurs when on iPhone, iPad and MacBook.

< personal information under the direction of the host >

edit your message if you do not want your email address harvested for spam by a web bot.

have you tried directly from iCloud.com?

How can I view calendar appointment when I'm not in the screen of the calendar?

How to display appointments in the calendar when not in the screen of the calendar.

original title: appointments in calendar view

There seems to be some gadgets for Vista which can show upcoming appointments, kept in the Windows Calendar. And here's one: http://gallery.live.com/liveItemDetail.aspx?li=a238bbad-9430-43c6-ba4e-21aa8f75c0d2

I also found some references to Google Calendar gadgets so that you can keep Vista calendar in sync with Google Calendar or just use Google calendar directly. http://www.google.com/#hl=en&sugexp=gsih&xhr=t&q=google+calendar+windows+vista+gadgets&cp=32&pq=google%20calendar%20windows%20vista&pf=p&sclient=psy&source=hp&aq=0n&aqi=q-n1&aql=f&oq=google+calendar+windows+vista+ga&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=8a58e93555963d21&biw=1106&bih=706

Notifications of calendar to blackBerry Smartphones does not

I have many items in my calendar and my reminders/notifications do not work. I used to receive a reminder to pop up 15 minutes before, but I get no other since yesterday. Don't know what has changed!

With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

Now retest your calendar alerts.

Message form "Emailing data files" when it should not

I have a simple PDF with a form I created with the form tools in Acrobat 8 Pro for sending a FDF file by e-mail.
It works OK but when you click on some other internal links on the page in the document (established in InDesign) completely unrelated to the form I get the following pop up box:
Sending files of data by Email
Please note that this form contains a button to send by e-mail. Clicking this button will send a data file containing the data that you type into the form. However, the form itself will not be sent. Remember that you can not save a completed copy of the form with Adobe Acrobat Reader 9.
1. How can I stop this popping up. Especially on pages that are unrelated to the form.
2. Why does say: "don't forget you can't save a completed copy of the form with Adobe Acrobat Reader 9 when it doesn't seem to work OK. I can send the FDF file to an email address. But this box pop up is not good.
And I have another query that is not really on the subject.
3. How do you get the option buttons to be mutually (for example: sex: male/female)-it is said in the Options button in the Radio button Properties tab so that they have the same field name. But when you set the domain name?
I posted this in the Mac section, because I think that the Mac of Acrobat Pro version can be the cause of the road!

1. How can I stop this popping up. Especially on pages that are unrelated to the form.

I don't know that you can. This is a user setting, not a PDF setting.

2. Why does say: "don't forget you can't save a completed copy of the form with Adobe Acrobat Reader 9 when it doesn't seem to work OK. I can send the FDF file to an email address. But this box pop up is not good.

It is correct. The user cannot save the file which is a pdf file. He sends you a pdf file, but as you have noticed a fdf file.

3. How do you get the option buttons to be mutually (for example: sex: male/female)-it is said in the Options button in the Radio button Properties tab so that they have the same field name. But when you set the domain name?

If you double-click any field with the field tool, you get the field properties box. You can set the value of the name field and by default here. You want the name of the field to be the same, but different default value.

Computer to sleep when it should not.

I used the following command:

sleep of sudo pmset - a displaysleep 15 disksleep 0 0

The intention was to make sure my computer would never sleep and would be able to continue long downloads like my dropbox synchronization.

Always when I go home, the computer is asleep and interrupted downloads.

How can I diagnose this? Is there a tool to monitor what the computer is doing and why when I'm missing?

Thank you!

Why not go to system preferences/Energy Saver and define sleep ever?

Regulator PID very slow to reach the value Point and zeros process Variable when it should not

Hello

I am using a PID controller to regulate the emission of a filament current in an ion gauge, but I'm running into several problems.

The first and less important, are the controller of PID VI takes at least 5 minutes to get the current where it needs to be. Is it possible to speed this up?

The second and more important, are that the PID controller tends to zero the process variable before you start the process of getting the close process of the target value variable. This can be seen in the attached VI: I write 5.8 volts voltage filament - something I did at the beginning to try to get the controller PID for the process close to the target faster - value variable but when the PID controller starts to do his thing, he kills the tension before anything, rather than rise of 5.8 V.

The attached VI is a single which has these problems. VI actual ion gauge controller I've written has the same problems, but in a form even more frustrating. I have a while loop set up for the filament voltage to where it should be (using a PID controller) first and foremost, then a loop of data acquisition, which also includes a feedback loop in the form of a PID regulator to maintain the filament voltage. When the second PID controller starts to run, it concentrates the tension that the earlier had set, taking another 5 + minutes to reach the point where we can take data and giving us 5 minutes of false data in the process!

Does anyone know why PID controllers are behaving like this, and what can I do to fix/work with this behavior?

Hello

It seems that PID VI will always be 0 for the first iteration. You can, however, use the advanced PID VI and set up the first iteration in manual mode. After subsequent iterations, you could then define this automatic mode and there will be a transition smoothly. I think this will give you the desired behavior.

-Zach

BlackBerry 10 send Calendar invites to my Z10

On my old Blackberry all I had to do was include my e-mail bell.blackberry.net on a calendar application and I could do in my BB calendar. Now that e-mail is no longer supported (shame on Bell) but I have not found a way of replacing to do this again - I have two e-mail accounts incoming recorded that all work, but if one of them include in a request for calendar it appears as a calendar entry, but the button I accept doesn't seem not active - at least all the time - what Miss me?

Hey insidespin,

This function is not available for a POP or IMAP, this feature accounts would need an e-mail account using CALDAV and Activesync.

Thank you.

Audio extending randomly when it should not

Hello
I am currently working on an Adobe Captivate 7 project in which I am importing audio slide by slide. Each blade has a bit of audio that plays when you enter it and then stops. Random on about 5 screens for some reason any audio plays and then audio plays the next slide as well. I can't find something in the settings or actions that happens and I double checked the audio files several times to make sure this isn't a problem here. When I preview the slide using F3, it plays only the audio slide show as it should, but when I do a real preview or publish it plays next audio slide as well. Help, please!
-Taylor

Make sure that there is at least a small space between the beginning and the end of the audio on the timeline of each slide. Captivate sometimes concatenates audio clips, if they are hard against the beginning or end of the timeline for the slide.

get ORA-01403: when it should not

Hello, I apologize in advance for my spelling, name (takes 6 hours to change) and the headaches you migth get, however,.
I bring you the following code and test results:
-----------------------------------------------------------
-The procedure that throws the error.
-----------------------------------------------------------

create or replace
procedure P_COLEGAS(x in number) as
ctipo varchar2(20);
asd varchar2(20);

cursor curnombre is
select nombre from unidad,elemento where (elemento.id_elem=unidad.id_elem and unidad.tipo=ctipo and elemento.ciudad=asd);

begin
select unidad.tipo, elemento.ciudad into ctipo,asd from unidad,elemento where unidad.id_elem=x and elemento.id_elem=x;
for blah in curnombre loop
DBMS_OUTPUT.PUT_LINE('nombre unidad: '||blah.nombre||' ');
end loop;
end;
-what i get when executing the procedure-
Error que empieza en la línea 1 del comando:
exec p_colegas(19)
Informe de error:
ORA-01403: no data found
ORA-06512: at "BD00.P_COLEGAS", line 9
ORA-06512: at line 1
01403. 00000 - "no data found"
*Cause:
*Action:

-----------------------------------------------------------
-the real problem-
-----------------------------------------------------------
in the case of this procedure I had to write
(1)

select unidad.tipo into ctipo from unidad where unidad.id_elem=x;

(2)

select elemento.ciudad into asd from elemento where elemento.id_elem=x;

Instead the single query I wrote, we get the following:
(1) wonderful works, gets only error when there is no match for x.
(2) throws the error that I was before.

However when I do the following query in the spreadsheet and run it:
(3)

select elemento.ciudad from elemento where elemento.id_elem=x;

I get what I expect to get 1 row 1 column. (Yes it has data)
Note: (3) the only difference is that I remove the clause, and x is the same number that I used when I run the procedure.

-----------------------------------------------------------
--------------------the question------------------------
-----------------------------------------------------------
Why in the procedure, the failure of the (2) query to retrieve the data, the same which data the query (3) doesn't fail to pick up?
I get ORA-01403, when I shouldn't?
is there a work around for this problem?

-----------------------------------------------------------
--------------------what i try------------------------------
-----------------------------------------------------------
Nestled the request with its own handle exception error, get the same results, a few screenshots of the error with a different treatment.

used tool: sql developer

----------
-Example of data-
----------
tested the procedure with the following sample data in a new workspace, make the same mistake.

--------------------------------------------------------
--  DDL for Table ELEMENTO
--------------------------------------------------------

  CREATE TABLE "ELEMENTO" 
   (     "ID_ELEM" NUMBER, 
     "CIUDAD" VARCHAR2(20), 
     "TIPO" CHAR(1), 
     "X" NUMBER, 
     "Y" NUMBER, 
     "FECHAHORA_CREACION" TIMESTAMP (6)
   ) ;
/
--------------------------------------------------------
--  DDL for Table UNIDAD
--------------------------------------------------------

  CREATE TABLE "UNIDAD" 
   (     "ID_ELEM" NUMBER, 
     "PORCENTAJE_SALUD" NUMBER, 
     "NOMBRE" VARCHAR2(20), 
     "TIPO" VARCHAR2(20)
   ) ;
/
REM INSERTING into ELEMENTO
SET DEFINE OFF;
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (12,'Infernalia','U',10,10,to_timestamp('12-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (15,'Infernalia','U',10,7,to_timestamp('12-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (19,'Infernalia','U',15,9,to_timestamp('12-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (23,'Infernalia','U',16,8,to_timestamp('12-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (27,'Infernalia','C',15,10,to_timestamp('12-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (52,'Humania','U',26,10,to_timestamp('22-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (58,'Humania','U',24,9,to_timestamp('22-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (62,'Humania','U',27,11,to_timestamp('22-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (64,'Humania','C',25,8,to_timestamp('22-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (78,'GruntVille','U',47,32,to_timestamp('29-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (84,'GruntVille','U',42,28,to_timestamp('29-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (89,'GruntVille','U',43,29,to_timestamp('29-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (91,'GruntVille','C',44,37,to_timestamp('29-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (29,'Infernalia','C',16,7,to_timestamp('12-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
Insert into ELEMENTO (ID_ELEM,CIUDAD,TIPO,X,Y,FECHAHORA_CREACION) values (90,'GruntVille','U',49,36,to_timestamp('29-NOV-20 12.00.00.000000000 PM','DD-MON-RR HH.MI.SS.FF AM'));
REM INSERTING into UNIDAD
SET DEFINE OFF;
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (12,100,'Grang','Soldado');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (15,100,'Krout','Médico');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (19,100,'Warf','Obrero');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (23,100,'Puaj','Obrero');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (52,100,'Marcelus','Soldado');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (58,100,'Claudius','Soldado');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (62,100,'Arturius','Obrero');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (78,100,'Klaknot','Médico');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (84,100,'Staisht','Médico');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (89,100,'Bjorkson','Soldado');
Insert into UNIDAD (ID_ELEM,PORCENTAJE_SALUD,NOMBRE,TIPO) values (90,100,'Sknot','Médico');
--------------------------------------------------------
--  Constraints for Table ELEMENTO
--------------------------------------------------------

  ALTER TABLE "ELEMENTO" ADD CONSTRAINT "ELEMENTO_CHK1_TIPO" CHECK (TIPO IN ('U', 'C')) ENABLE;
 
  ALTER TABLE "ELEMENTO" ADD CONSTRAINT "ELEMENTO_PK" PRIMARY KEY ("ID_ELEM") ENABLE;
 
  ALTER TABLE "ELEMENTO" MODIFY ("ID_ELEM" NOT NULL ENABLE);
 
  ALTER TABLE "ELEMENTO" MODIFY ("CIUDAD" NOT NULL ENABLE);
 
  ALTER TABLE "ELEMENTO" MODIFY ("TIPO" NOT NULL ENABLE);
 
  ALTER TABLE "ELEMENTO" MODIFY ("X" NOT NULL ENABLE);
 
  ALTER TABLE "ELEMENTO" MODIFY ("Y" NOT NULL ENABLE);
 
  ALTER TABLE "ELEMENTO" MODIFY ("FECHAHORA_CREACION" NOT NULL ENABLE);
/
--------------------------------------------------------
--  Constraints for Table UNIDAD
--------------------------------------------------------

  ALTER TABLE "UNIDAD" MODIFY ("ID_ELEM" NOT NULL ENABLE);
 
  ALTER TABLE "UNIDAD" MODIFY ("PORCENTAJE_SALUD" NOT NULL ENABLE);
 
  ALTER TABLE "UNIDAD" MODIFY ("NOMBRE" NOT NULL ENABLE);
 
  ALTER TABLE "UNIDAD" MODIFY ("TIPO" NOT NULL ENABLE);
 
  ALTER TABLE "UNIDAD" ADD CONSTRAINT "UNIDAD_PK" PRIMARY KEY ("ID_ELEM") ENABLE;
/
--------------------------------------------------------
--  Ref Constraints for Table ELEMENTO
--------------------------------------------------------

--------------------------------------------------------
--  Ref Constraints for Table UNIDAD
--------------------------------------------------------

  ALTER TABLE "UNIDAD" ADD CONSTRAINT "UNIDAD_ELEMENTO_FK1" FOREIGN KEY ("ID_ELEM")
       REFERENCES "ELEMENTO" ("ID_ELEM") ENABLE;
 
/

Edited by: 975362 04:47 12/06/2012

Published by: BluShadow on December 6, 2012 12:51
addition of {noformat}

{noformat} tags for readability of code/data.  Please read {message:id=9360002} and learn to do this yourself in future.

Edited by: 975362 on 06-12-2012 05:44 AM
added example data.

This is because you use X as the parameter to the procedure, and X is a column in the table :)

So use a table alias in the query or use another name for the parameter.

Published by: ascheffer on December 6, 2012 15:04

REMOVED_FROM_STAGE shooting event when it should not...

Hi all
I was wondering if anyone has seen this before. I have an application that has some points of navigation on the main timeline. The document class stops the film on the first image, and the 'House' a Event.ADDED_TO_STAGE and Event.REMOVED_FROM_STAGE listeners on that movieclip class. The funny thing is, it calls the function ADDED as usual, then pull the REMOVAL works immediately after. However, when I run it, it doesn't actually remove the movieclip from the stage. It's still there. When I navigate to another section ('rare' or 'help') and back to 'home', it does not draw a second time, everything works fine the first time.
So I guess my question is, which would fire the REMOVED_FROM_STAGE event without actually removing the object in the scene? And why only happen once?
Thanks for the research!
-Nick
Here's a code, but also a screenshot of my main timeline:
package src.modules {}
import flash.display.MovieClip;
import flash.events.Event;
import flash.events.MouseEvent;

Import src.utils.greensock.TweenLite;
Src.utils.greensock.easing import. *;

SerializableAttribute public class ModHome extends MovieClip {}

private static const DISTANCE public: int = 700;
Private static const TWEEN_DURATION:number is 1.0;.

private var _currentPage:int = 1;
private var _isDone:Boolean = true;

public void ModHome() {}
Super();
trace ("initialized home');
addEventListener (Event.ADDED_TO_STAGE, onAddedToStage, false, 0, true);
}

private void onAddedToStage(evt:Event):void {}
trace ("host added in step");
removeEventListener (Event.ADDED_TO_STAGE, onAddedToStage);
addEventListener (Event.REMOVED_FROM_STAGE, onRemovedFromStage, false, 0, true);
BUTTONS
pageLeft_btn.addEventListener (MouseEvent.CLICK, onMouseClick, false, 0, true);
pageRight_btn.addEventListener (MouseEvent.CLICK, onMouseClick, false, 0, true);
}

private void onRemovedFromStage(evt:Event):void {}
removeEventListener (Event.REMOVED_FROM_STAGE, onRemovedFromStage);
BUTTONS
pageLeft_btn.removeEventListener (MouseEvent.CLICK, onMouseClick);
pageRight_btn.removeEventListener (MouseEvent.CLICK, onMouseClick);
trace ("home removed from the stage");
}

private void onMouseClick(evt:MouseEvent):void {}
{if (_isDone)}
Switch (evt.target.name) {}
case 'pageLeft_btn ':
movePages ("left");
break;
case 'pageRight_btn ':
movePages ("right");
break;
by default:
trace ("home - nothing");
break;
}
}
}

SCROLLING WINDOW
private void movePages(thedirection:String):void {}
_isDone = false;
var x 1: int;
{Switch (branch)
case "right":
If (_currentPage > 1) {}
_currentPage = _currentPage - 1;
x 1 = pages_mc.x + DISTANCE;
TweenLite.to (pages_mc, TWEEN_DURATION, {x: x 1, ease:Quint.easeInOut, onComplete:onTweenComplete});})
} else {}
_isDone = true;
}
break;
case "the left":
If {(_currentPage < 3)
_currentPage = _currentPage + 1;
x 1 = pages_mc.x - DISTANCE;
TweenLite.to (pages_mc, TWEEN_DURATION, {x: x 1, ease:Quint.easeInOut, onComplete:onTweenComplete});})
} else {}
_isDone = true;
}
break;
}
}

private function onTweenComplete (): void {}
_isDone = true;
pageMarker_mc.gotoAndStop (_currentPage);
trace ("Complete");
}
}
}

Comment out the super() call and repeat the test. Why you use?

question pool view settings. maxed out when it should not.

Im having a problem where my pool is available 16 (max) and none of them are used. Ideally, I want to begin by 6 and then deploy on demand as needed.
Here are my settings for my pool, did I miss something? Let me know if you need more information.
I have a automated, floating pool, linked clone
Pool sizing
* max number of 16 jobs
* number of powered on desktop computers 6 spare parts
* number of loans during the maintenance operations of composer 3 minimum
Supply schedule
* providing offices on request, min number 6 workstations
Thank you

Power off should do the trick.

Notification send Calendar invites when it should not

Similar Questions

Maybe you are looking for