Notification sound USB connection

Similar Questions

• HP ENVY 17 t-j100: how to join HP ENVY w Win 8 new device. Don't get notification when usb connected.

  If I get the feel for what I do, I tried to attach a wired mouse but had no 'new device' notice when I plugged it into the usb port, and it was never acknowledged.  My old laptop with Win 7 would give me opinion and then look for the driver on the internet.  Win 8 does no such thing.

  Finally I intend to connect a mouse n Keyboard wireless and join my two large screens, but I need to understand first the cable part.

  Could not figure out how to mark this one resolved.

  Ports of this device are difficult to insert in?  Best Buy Geek told me to try another USB device.  The same problem.  Then I used a little more strength and made connection.  Don't know why or this causing blockage but all ports are the same, AND YES, I AM PLUG CORRECTLY.

  SOLVED

• No Notification sound when the connection/disconnection of USB device

  Hello

  I am running Windows 7 on a separate partition on a 2011 MacBook Pro (installed via Boot Camp).

  This laptop has two USB ports on the left side.

  If I connect/disconnect a USB device to the port more back, I get the notification sound as usual.

  However, if I log out these same devices to the port further there is no notification even if the devices are recognized & seem to work fine.

  Can anyone tell how to enable notification of this port please?

  John,

  Thank you for your response.

  The sound scheme has already been set to "Windows default", but just for good measure, I changed it but it made no difference.

  As mentioned be notified when you use one of the ports USB, but not the other.

  I posted this in an Apple forum & other users of this machine & installation are reporting the issue even if it seems to be a generic hardware problem & not just something on my own system.

  See you soon.

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• No sound when connect you external speakers

  original title: external speaker problem

  I have a small speaker set external USB connected to my laptop.  Recently, I disconnected them and change the sound settings to use the laptops speakers.  When I plugged the speakers external back in, I have no sound.  There is no installation CD and my drivers seem to be OK, although I'm not sure.  I search for drivers and everywhere that I go I thought that my audio drivers are up to date.  Help!

  Hi, George,

  I am happy to know that the problem is resolved, the problem related to the system restore, I ask allows you to create a new thread to help you better. You can create a new topic by clicking on the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp

• WRT160NL connection with n and USB connection problem

  Hi guys,.

  I have the Linksys WRT160NL router and I have two fundamental problems with that:

  1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

  What should I do to make it work with n as well?

  2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

  I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

  I don't know what to do to solve this 2 problems... Maybe someone could help me...

  Thank you

  Try changing some settings on the router wireless.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

  Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

• BlackBerry Blackberry Q5 Q5 undetected in link (USB connected)

  Hi, I have a new blackberry Q5 for 1 week and I used Blackberry Desktop to transfer data from my previous BB Curve 9100. Then I installed the BB link for my BB set Q5 upgraded to the latest OS 10.1 (at the time). Everything worked fine on my Windows 7 Enterprise 64-bit laptop, USB connected.

  Then, today, I wanted to connect my BB Q5 via USB because I got a notification to upgrade to Mac OS 10.2. But when I connect the BB to my laptop USB port, nothing is really happening, even the Windows Device Manager does nothing.

  I tried with 2 different USB cable and same problem. Also, (perhaps another problem), when I connect the USB cable, my BB Q5 tells me "you should use the charger supplied for accusing him faster" (a kind of message)... Even when I connect using the charger provided in the socket...! ? ! (WTF)...

  I've rechecked setting and under the link 'Blackberry' and it is activated: I
  the 'Mobile use network' is disabled, of course I don't want to use the 4G Mobile to connect with link BB and I can see the name of my laptop displays at the bottom of the screen of option 'Link BB' on my BB device.

  But on my laptop, inside the link, it says that the device is not connected as well, under settings, in the storage and access, the USB connection is set to Windows (has been resolved on 'auto' before, but still without success).
  WiFi access is disabled: o
  USB storage device is activated: I

  If my device is not detected in the Link BB software and even not detected as a USB storage device in Windows.

  I uninstalled the Software Desktop BB and BB link, then reinstalled BB link without success... I'm stuck now.

  Any help, thanks.

  I finally got it to work:

  -J' have completely stop my Blackberry Q5 terminal and disconnected from the USB.

  -In Windows Device Manager, I can see the virtual private network of Blackberry in the Group of network adapters, which is correct. But the Terminal Blackberry did not appear.

  -Plug the USB cable into my device Blackberry Q5 and I turned on with the switch on the top.

  -From there, Windows has detected the terminal and installed the drivers from the Terminal Blackberry (automatically supplied with the BB Link software)

  - And link began to say automatically that the BB is correctly connected via USB.

  -When I turn on the USB mass storage, it works as well (and disconnect link at the same time), so I have to stop mass storage USB in BB Q5 settings do connect to Link via the USB cable.

• notification sounds 10 foires iOS

  Hello

  I've just updated to IOS10 in my iPhone 6 and all notifications sounds like tri-tone in my lock screen, besides the fact that each has a different sound in their configuration.

  Someone else with the same problem? How can I solve this problem?

  Thank you

  Ariel

  HY Ariel

  I have the same problem, but it seems that no body is experimentation.

  Stefano

• iPhone 6s use usb connections in my car

  6s IiPhone uses usb connections in my car

  iPhone devices no load carrier via the USB Ports of the music player

• Photosmart C309 printer: change to usb connection

  I currently have a wireless connection to my computer.  How to change that to a USB, wired connection?

  Hey @dac71, welcome to the Forums of HP!

  I understand that you do not want to change to have a wireless connection to a USB connection between the printer and the computer. When you connect a USB cable, the printer automatically installs the correct driver and since you have already paid it works wirelessly, it would be seamless.

  If you're having trouble, and you have a Windows operating system, run the HP print and the doctor Scan with the USB cable connected and it will help: www.hp.com/go/tools.

  If you have a Mac and you need assistance let me know.

  If it meets your needs, please click Accept as Solution button below. If there is anything else I can help make sure you respond back and I will do my best to help!

  See you soon!

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• Change the Notification sounds

  I would like to change the notification sound for messages on my MacBook Air? I can't understand it.

  Launch Messages.

  Messages > Preferences > General > "his Message received:

  Click the box next to 'Sound Message received' and choose the sound you prefer.

  

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• Skype notification sounds does not at all RESOLVED

  On Win 7, I installed Skype 6.21 but notification sounds worked... When I checked the settings and tried to play all the sounds, it does not makes all the sounds as well.

  I decided to uninstall it and install Skype 6.22, but it has the same problem... I checked google if there are similar problems, but I found only old Skype 5 forums and so on and no one has helped me solve my problem. No idea what to do?

  RESOLVED: the reason why it didn't work was the scene of singing! For all those who have the same problem, the solution here:

  Tools > Options > Audio settings, look for the "Ringtone" section, if said option 'speakers use selected', to 'double headphones and speakers.

  In Skype, open Tools-> Options-> sounds. The text on the button says "Mute all sounds"? Be aware that if the text is "Activate all sounds", then all sounds are actually set on mute.

  In addition, open Tools-> Options-> Audio settings. Which device is selected for "Ringing"?

• Notification sounds

  Hello

  About three months ago, the notification sounds new received message and calls just stopped working, exactly as if I was on the "do not disturb" mode

  I looked at several different positions, but none seemed to solve this problem.

  After checking in the options, I noticed that there was in fact no option for me to turn them on or off (as you can see in the screenshot).

  I checked my drivers, my volume mixer, have deleted all the files of Skype on my computer and then reinstalled several times, but I have the same problem each time.

  Thanks in advance

  

  Pay attention to what is written at the bottom of the window of 'sounds ':

  "Some of your settings of her class do not appear as your notifications are turned off.

  http://community.Skype.com/T5/Windows-desktop-client/there-is-no-quot-ringtone-quot-sound-in-my-Sett...