Notification sound when the power button is pressed

When I press on the on off button (to switch off my mobile phone) it emits a sound notification

Unfortunately I went through all the menu of the phone to turn it off but to no avail

I read in someforum that it is due to an update from sony

All the solutions! I will be grateful

Issue edited by Rickard

There is an option called shortened accessibility accessibility. Can you check if this is permitted.

Tags: Sony Phones

Similar Questions

  • computer just snoring and makes a sound when the power button is pressed

    I have an older Dell which has been upgraded to Windows 8. All of a sudden when I turned it on today, it sounds like a fan is running as well as a series of 4 beeps. Someone has an idea of what's going on? Thanks for any help.

    Hello

    These beeps are a code telling you there is a hardware problem. Check with
    Dell support or a real computer store (the one that made its own in-store service
    on Dell).

    Reference Dell Beep Codes and Diagnostic PSA Chart
    http://en.community.Dell.com/support-forums/desktop/w/desktop/3624.beep-codes-and-PSA-diagnostic-chart

    ====================================================

    Sound beeps are error codes that describe a problem with your machine.
    A continuous beep may mean keyboard (loose or bad cable), of coward, power Board, one
    short or another question according to the system/BIOS manufacturer. Other beep models have
    other meanings depending on the manufacturer of the BIOS.

    Startup and select the CONFIGURATION SETTINGS (BIOS/CMOS) - usually F2 that start you.
    look to see creator BIOS then see here:

    Computer MESSAGE / beep codes
    http://www.computerhope.com/beep.htm

    If my computer beeps and won't start, what do the beeps mean?
    http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
    http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

    POSTAL Codes beep
    http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

    Power on Beep Codes post
    http://www.pchell.com/hardware/beepcodes.shtml

    It may have other check so with system Maker or motherboard for manufacturer
    custom systems.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • The HP printer won't turn on or respond when the power button is pressed

    The HP printer won't turn on or respond when the power button is pressed

    The HP printer won't turn on or respond when the power button is pressed

  • HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

    I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

    Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

    HI @WayneCM,

    Thank you for your inquiry. I will do my best to help you!

    I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

    Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

  • printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

    HP printer all-in-one B210a win 7 64 bit.

    no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

    First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

  • Satellite C Touchpad Scrolls series / moves when the left button is pressed

    Hello

    Seem to have a problem with my touchpad.
    After about 2 weeks of normal operation, it now only rolls / moves when the left button is pressed.
    Had a quick look in the settings but can't seem to get anywhere.

    Any IDE?

    Thank you

    K

    It is not easy to say what the problem is here. Maybe this kind of behavior is the result of defective material.
    I recommend reinstalling the operating system using HARD drive recovery option and check again with the factory settings. If the same thing will happen again from the first moment he must be a bad operation of the equipment and in this case, you should contact the nearest Toshiba service provider.

    They can check, repair if necessary and all costs will be covered by the warranty.

  • Manufacture of extreme dual band 802.11 airport "buzz sound" when the power supply is attached

    Hello

    which is very probably wrong with my Airport Extreme?

    My Airport extreme dual band 802.11 done "buzzing" sound when the power supply is attached. The sound disappears immediately when power is disconnected and begins as soon as you connected again. It started two weeks ago, and it's really annoying.

    THX,

    Laura

    Most likely, the question is a bad capacitor in the diet. These can fail and are, unfortunately, not serviceable by the user... unless you have experience with electronic repair. You can try Apple, but chances are that you will have the best chance to get a replacement from another source, such as Impact Computers & Electronics or eBay.  I'm sorry.

  • Tecra M5 will not be on when the power button press

    I just sent my Tecra to a new location and at startup, nothing happens. The power light and the charge battery lights up, but nothing else. Could something have loosened up, which causes the computer does not start. I don't have a recovery CD.

    Any suggestions?

    Thank you

    Sandy

    Maybe the RAM has become loose? Try reinstalling the RAM, or RAM slots with table ELECTRIC cleaner cleaning.

  • No Notification sound when the connection/disconnection of USB device

    Hello

    I am running Windows 7 on a separate partition on a 2011 MacBook Pro (installed via Boot Camp).

    This laptop has two USB ports on the left side.

    If I connect/disconnect a USB device to the port more back, I get the notification sound as usual.

    However, if I log out these same devices to the port further there is no notification even if the devices are recognized & seem to work fine.

    Can anyone tell how to enable notification of this port please?

    John,

    Thank you for your response.

    The sound scheme has already been set to "Windows default", but just for good measure, I changed it but it made no difference.

    As mentioned be notified when you use one of the ports USB, but not the other.

    I posted this in an Apple forum & other users of this machine & installation are reporting the issue even if it seems to be a generic hardware problem & not just something on my own system.

    See you soon.

  • My laptop remains blank after pressing the power button

    Hello.. Please I really need help on how to repair my laptop. a lenovo ideapad s40. The problem started out as occasional BSOD. Then he started turning it back on while it is used frequently and finally it crashed. I restored system jointly, but that did not fix it. I resorted to the refreshing it still was not the answer. Then I reset the system losing all my data but the problem persists. When the power button is depressed now, the screen remains blank, but you could still hear the rotation of the fan system. Please I really need help with this issue.  As I said, it's a Lenovo ideapad s400. operating system Windows 8, 4 GB Ram, 500 GB of hard drive capacity, Radeon graphics card. https://onedrive.live.com/redir?resid=BF0101CC285F8D47! 106 & authkey =! ACoA6t1Ih_cqx3s & ithint = the file % 2czip a link to the dump files.

    The debugging session: Mon 20 Oct 08:53:10.352 2014 (UTC - 05:00)

    Error checking 117, {fffffa80085e0010, fffff8800401f28c, 0, 0}

    WARNING: Unable to verify timestamp for atikmpag.sys
    ERROR: Module load completed but symbols can be loaded for atikmpag.sys
    Probably caused by: atikmpag.sys ( atikmpag + c 928)

    Follow-up: MachineOwner
    ---------

    Loaded symbol image file: atikmpag.sys
    Image path: atikmpag.sys
    Image name: atikmpag.sys
    Timestamp: Thu Aug 14 21:10:45 2012 (502AF715)
    CheckSum: 00061A 50

    This accident was caused by your ATI/AMD display driver.

    Update the driver from here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-s-series-netbooks/ideapad-s400-notebook/downloads/DS031962

  • My his laptop makes a beep when I press the power button / stop and it does not start

    Hello

    I bought a new Dell Inspiron 15z touch ultrabook and when I pressed the power button, it starts to beep and won't start. The screen is totally blank. What should do? Help, please

    -Mayur gala

    Hi Mayur,

    Welcome to the community,

    Sound signal can be used as a diagnostic indicator. The computer may emit a series of beeps at startup if errors or problems. This series of beeps identifies a problem and is called "beep code".

    See the table below which shows the beep codes and the possible problem:

    Overview of beep Code
    Beeps Description Possible cause
    1 ROM BIOS checksum failure The map system, covers BIOS corruption or errors ROM failure
    2 No memory (RAM) detected Memory or memory slot failure
    3
    • Chipset error (North and South Bridge error)
    • Time-Of-Day Clock test failure
    • Gate A20 failure
    • Super i/o chip failure
    • Keyboard controller failure
    System board failure
    4 Memory read / write failure Memory failure
    5 Real Time Clock (RTC) power failure CMOS battery failure
    6 Video BIOS Video/smart card failure
    7 Failure of the CPU Processor failure
    8 LCD SCREEN Failure of the LCD

    Let me know if you need assistance.

    Thank you

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

    It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

    I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

    If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

    Thanks for your help.

    Damicon999 wrote:

    Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

    no chime, black screen, that's all.

    I don't think they are infected.

    The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

    No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

    In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

    Genius of booking http://www.apple.com/retail/geniusbar/

    Online https://getsupport.apple.com/GetproductgroupList.action

    check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • When my computer goes into sleep mode, I have to press the power button to turn it back on.

    original title: sleep/hibernation

    When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

    Can someone tell me how to solve this problem, as if it was before?

    Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

    HTH,
    JW

  • Options for the power button Windows XP to ask what I want to do when the Start button / stop is pressed

    Original title: Start button / stop - "ask me what to do" - where is it?

    Under XP, when I pressed the power button I could put it "Ask Me what to do." This is very useful for two reasons:

    -My PC is under my desk, and if I'm not careful, I can press the power button with my knee...

    -To turn off, I can hit the power button / stop rather than start etc, then choosing.

    The feature exists on Windows 7 (press alt + F4), then how do you link that to the press the power button? Why this was removed?

    See you soon,.

    Chris

    Hello

    Yes, there are only work-a-rounds and that is why I suggested that
    thread. There are also a few details about why he was abducted that
    are especially that in general as it caused more problems than it solved. Then
    for those who have used the function correctly, it is a concern when trying
    to restore its functionality. To my knowledge, is not 100%
    this case, just ability cannot be added in by a registry setting
    as support has been totally removed. If this is the case, then the work - a-
    towers or possible 3rd party solutions are the remaining options.

    Please let us know if you find a better solution.

    I hope this helps.

Maybe you are looking for