NotificationGlobalSettings modeChanged signal does not work after restarting

Hello

I test this on the OS SDK 10.2.1.1927 for my Alpha of Dev C. My application is headless without long-term stop. The signal and slot work perfectly upon deployment of app on device. My slot is called as soon as there are changes to the Notification Mode of the phone.

But once the restart of the device, for some reason any. Housing starts running headless, the signal and slot is CONNECTED, because I use the bool to check if the connection is successful. And yes it returned true for the connection.

But in fact, my slot is not called at all. All changes may not be received. Someone at - it get the same question?

OK, get it fixed. I don't know if BlackBerry will fix this in the operating system or not, but in case you need, then the another work-around is to delay the connection.

Delaying the call connect to connect this signal modeChanged (bb:latform::NotificationMode:Type) to your site that handles things when the overall Notification Mode is changed.

In my case, I tested with a delay of 3 seconds and it does not work properly. After the device restarts, it still works properly.

Tags: BlackBerry Developers

Similar Questions

  • VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

    I work in the field environment.
    Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
    but it runs on the Windows XP computer.
    For example:-Inventory.exe (work), Sales.exe (does not work)
    Help, please.

    Hello

    I suggest you to ask your question at the following link.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

    I would also ask you to contact your IT Department for further explanations.

  • mute dv4 1225dx windows 7 button does not work after restarting

    Hello world. I will try windows 7 on my pavilion laptop and everything works perfectly except the button mute who does not work (do not put on mute or turn red). I installed the driver sp45073 which is supposed to be the one to W7 64-bit. the curious thing is that it works perfectly once the computer restarts after the installation, but if I restart again, it stops working. If someone could help me that would be great. Thanks in advance,

    Well, I ended up reinstalling windows 7 64 and it works now. It seems that the problem was the installation of the drivers via windows update. I just installed those appearing on the hp Web page and there is no problem so far.

  • eHome receiver sometimes does not work after restarting

    Sometimes my Receiver USB ehome stops working after a reboot, and it has the most recent drivers from Microsoft that is the only driver for the device. I use it with Windows Media Center, and sometimes it doesn't work after reboot, or after the release of sleep. I tried to disable USB suspend but which did not work.

    Hello

    Thanks for posting your question on the Microsoft Community.

    It should be the following information so that we can help you further:

    What happens to the eHome USB receiver when the system restarts or wake mode 'sleep'? It gives you an error message, or simply, it does not?

    Verify that all devices are connected to the USB.

    Try to uninstall and reinstall eHome receiver and check if this solves

    Remove the pilot of transmitter/receiver infrared (IR) of the Windows Device Manager to force Windows to reinstall the driver. You don't have to restart the computer when you perform this procedure. To remove the pilot of transmitter/receiver infrared in the Windows Device Manager, follow these steps:

    1. Click Start, right-click my computer, and then click Properties.
    2. In the hardware tab, click Device Manager.
    3. Expand Human Interface devices.
    4. Double-click Microsoft eHome infrared transceiver.
    5. On the tab driver , click Uninstall, and then click OK
    6. Disconnect the IR receiver to the computer.
    7. Wait 30 seconds, and then reconnect the IR receiver. Windows the receiver automatically detects and installs the appropriate driver.

    In addition, update the last chipset and drivers USB of the manufacturer's Web site.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-isn ' t-work correctly

    Check in the BIOS if no energy saving option is enabled for the USB ports:

    1. Restart the computer.
    2. When the manufacturer logo to enter the BIOS settings, press "F2" . (The exact key may vary and is usually displayed on the screen for the system to start).
    3. Go to the "Integrated Peripherals" menu using the arrow keys. If your BIOS does not have a menu on-board devices, select "Advanced BIOS Features".
    4. Select "USB controller" using the arrow keys and press 'Enter' to change the setting of "disabled" to "Enabled". Once disabled, the computer does not recognize USB devices when connected.
    5. Press "F10" to save the settings and exit the BIOS.

    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I hope this helps. Please get back with the results.

  • ColdFusion Developer of 11 does not work after restarting the local computer

    I'm all new to see  I have installed CF developer 11 & attached to IIS.  I'm on a windows 7.  Whenever I have to restart my machine for some reason, the CF administrator will not work, nor any CFM page will work.  I have to completely uninstall CF11 & before reinstalling in order so that it works again.  Any ideas or suggestions as to what might be the cause of this behavior?  Here is the error message I get when I try to hit CF Administrator:

    HTTP status 500 - ROOT CAUSE:


    type of Exception report

    message ORIGINAL:

    Description The server encountered an internal error that prevents to satisfy this demand.

    exception

    javax.servlet.ServletException: ROOT CAUSE: coldfusion.server.ServiceFactory$ServiceNotAvailableException: The Monitoring service is not available. at coldfusion.server.ServiceFactory.getMonitoringService(ServiceFactory.java:223) at coldfusion.CfmServlet.service(CfmServlet.java:199) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source)  coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) 

    Note Track of the full stack of the root cause is available in the Apache Tomcat/7.0.52 logs.


    Apache Tomcat/7.0.52

    Can you guarantee that the CF service is running. Also, have you applied the hf1100 - 3776060.jar?

    Kind regards

    Anit Kumar

  • iPhone 5 home button does not work after ios 10

    My 5 Iphone Home button does not work after update final IOS version of 10.

    The home button works on the first push to wake the phone but it will not open the phone the second button.

    I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

    You attempted to restart your phone?

    You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

  • My apple pencil does not work after the 9.3.4 update.

    My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

    < re-titled by host >

    Greetings RechargeableJam,

    Welcome to the communities of Apple Support!

    I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

    First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

    Force a nearby application on your iPhone, iPad or iPod touch

    Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

    Best regards.

  • On my trackpad scrolling does not work after the upgrade to 12.0

    On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

    Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.

    Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

    Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

    In addition, the HID-Compliant touch screen driver is missing.

    Please help me solve this problem, thank you.

    Hi there @BryanHech,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

    How you did update the drivers?

    You use Windows Update?

    Have you checked to see if the driver has been disabled?

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to do a hard reset?

    Have you tried a update the BIOS and graphics driver?

    Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

    Have you tried to Configure the display key?

    Have you tried to activate the driver in touch screen device manager?

    Please follow these steps to see if you can activate the touch screen:

    • Open the Device Manager
    • Find "Human Interface Devices"
    • Expand "Human Interface Devices"
    • Right-click on "touch screen HD compliant."
    • Click 'Activate' (if available)
    • Restart your laptop.

    If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

    To use the system restore in Windows:

    • Go to the Search
    • Type of Control Panel
    • Click on Control Panel
    • Click System
    • Click on the System Protection
    • Click the System Protection tab
    • Click on System Restore
    • Click Next
    • Choose a restore point
    • Click Next
    • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
    • Click Yes to confirm

    When the system restore is complete, you'll be up a pop that says that it has been completed.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Thank you!

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • Re: Satellite L300 - camera does not work after upgrade to Win7

    As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

    There is no exclamation point in the system.

    Satellite L300 (PSLB8E)

    Hello

    What happens when you start the webcam app?
    All programs-> Toshiba-> webcam

    Did you install other 3rd software part as for example the Skype that could access the webcam?

    Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
    Start Skype for example, check the settings in Skype webcam chose correctly.

    It would be really interesting to know if the other software would be able to use the webcam.

    By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
    Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

  • Touch ID does not work after update iOS 9.3

    My TouchID does not work, after the iOS 9.3 update yesterday. Does not work to unlock the phone, or the applications that use it. I have disabled/enabled it. Re-installation of my fingerprints and no luck.  Restarting phone did not help either.

    Not done prior backup of phone to date.  And have not tried to make a backup and restore again.  Has been hoping a solution faster or better (and also wanted to report this problem).

    Any ideas?

    Have you tried a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

  • Satellite x 200: Webcam does not work after I have connection on Microsoft messenger

    Hello everyone

    I have a Satellite x 200 SLI and for some reason any webcam does not work after I login on messenger... Even when I disable messenger and even disable internet... it still does not. Only when I restart the operating system.

    Anyone has an idea on how to solve this problem?
    Already did the updates but still, anyway.

    Hi Gabriel

    Check it out!
    I noticed several discussions on this issue, it would be really interesting to know if the SP1 fixes this annoying problem

    Your comments would be appreciated

  • Satellite L870-165 does not work after having been repaired by their service

    Warranty Toshiba Laptop does not work after having been repaired by their service twice.
    Model: Satellite L870-165

    Computer does not start, rest with black screen showing: No bootable device - please restart your system

    After restarting the same thing happening again.
    I called incident phone Toshiba and after trying several options, I said take it for repair service.
    Told me first of all it was the hard drive, then called me to indicate this resettlement and ultimately it was the motherboard, what would have changed. The next day, being chosen computer repair returned to give exactly the same mistake, due to a malfunction only one night.

    After another call to 902 Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I arrived home the computer does not start only once, again gives the same error.

    I think this team comes with a default factory that his solution is not easy, because even the technical service told me I didn't know what to do with it.

    Sorry to hear all this. Unfortunately, we can not help you much so try please clarify this service. They help you with your laptop even if all must be exchanged.
    > Warranty Toshiba does not work after having been repaired by their service
    To be honest I don t understand this sentence. How old is your laptop? warranty is already expired?

  • HP deskjet 3510 does not work after windows 8.1

    My printer HP Deskjet 3510 cannot be detected after windows 8.1.  My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud

    @klb75,.

    Thanks for posting.

    The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.

    After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=

    * Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.

    If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1

Maybe you are looking for

  • Satego X 200: make USB 2.0

    Whenever I connect a USB 2.0 device on my laptop, I get a message from Board "this device can achieve better performance when connected to a high speed USB 2.0 slot" (freely translted, German OS).When I click on 'View available seats' it shows that a

  • Re: Prepare for a clean installation of Windows 7. To remove the recovery partition?

    ....The laptop (A215-S4697) came with the restore disc. While searching for thecomputer for restore create disk... it's not - where tobe found. I guess I'll just put my confidence in the drive, when I receivedThis thing has been purchased. I was wond

  • I have a problem downloading Skype

    When I download Skype he says: we have problems to connect to the download server. Please help me Spoiler (Highlight to read) Spoiler (Highlight to read)

  • x 230 problem with config/system updates of windows

    I have a new x 230. Windows updates will not be installed as the last week - and they try to reconfigure the computer it does not work. This happens now whenever I start. Y at - it a solution or a fix?

  • Ethernet driver for hp 2000-2c10dx

    Hi, I have a laptop HP 2000-2c10dx. I installed W7 x 64 dual boot with factory installed W8 x 64. My problem is that I couldn't find the ethernet (realtek) for W7 driver also pilot wi - fi button does not work. Help, please. For realtek ethernet cont