NSLU2 drive connected to WRT610N

I have a 500 GB USB drive that I used to have connected to a NSLU2.  Replaced that (and my old router) with a WRT610N.  The 610 sees the drive, but wants to format.  Don't the 610 does not support the file system used by the NSLU2?  Known issue / workaround?  Latest firmware on 610.

Thank you-

Keep in mind that the wrt610 only supports Fat32 and NTFS has been added just recently. With regard to your hard drive you don't know not what file system, it is currently formatted as? By default the NSLU2 formats using the EXT3 file system, but an update of the firmware enabled file systems fat32/NTFS use. I hope that answers your question.

Tags: Linksys Routers

Similar Questions

  • Password protect an external hard drive connected to Time Capsule

    I have a WD passport external hard drive connected to my time capsule, so my wife and I can easily share files. I have the external hard drive connected through the locked time capsules WiFi network so someone in the House can not access however if they walked the time capsule and not plugged in the external hard drive they could walk away with it. When I try to password protect external hard drive then time capsule may not recognise, and so I can't use it as an external hard drive that is shared. No one knows how, to password protect the external hard drive connected to the time capsule as if someone physically stole the external hard drive it would be locked, but have yet still recognizable by Time Capsule when I plugged?

    Hope that makes sense.

    The only way to do is to encrypt the files on the computer.

    And you both use the same password. Unfortunately, this probably means that you can not share files directly... The TC is not a SIN... never, it was designed for this purpose so there no controls to help admin file sharing.

    If you create a DMG file on WD drive that encrypt you and you can copy files to and from... but only one at a time.

    Another method would be to use a specific software... Watch chronosync.

    http://www.econtechnologies.com/Chronosync/guide-sync-with-disk-image.html

    I don't him have not run in this configuration... so, you have to experiment if it manages what you want.

    I think that there will always be limitations on concurrent access from multiple computers.

  • Hello. I created a folder music on my external hard drive connected to my asus router.  I can now access the music through my media library.  How can I change the folder when I make new purchases to iTunes easily without doing it one by one

    I created a folder music on an external hard drive connected to my asus router.  I copied my music from my iTunes library in this folder access and can now my kodi media network.  How I updated the folder when I do new iTunes purchase without having to do it one by one thanks

    You can use a backup tool that updates only modified files.  You don't say what kind of computer you use.

    ITunes is actively using media on the external hard drive so you can replace it. Simply copy the media to one other player does not have iTunes it use it.  iTunes is probably still using media to your internal drive.

  • Time Machine backup to external drive connected to the TimeCapsule

    I have a 3 TB TimeCapsule, that contains the my iMac TimeMachine backup. So far so good.

    Now, I would like to connect an external drive to the TimeCapsule via the USB port to allow access to this drive of my iMac as well as other computers on my network. I would like to than the external to include in my Time Machine backup drive. Is it possible - by accepting that the backup of obviously only runs when the Mac is on? If this isn't the case, other methods of backup to an external drive, connected to the TimeCapsule, may be recommended?

    You can do it. Time Machine it will support up to a separate folder on your backup disk. Don't forget to remove it from the exclusions list in Time Machine preferences. I don't know if others cannot see the drive connected to your computer is turned off. They may be able to mount the drive on their computer as you do on yours. Try it because I could be wrong on this matter.

  • I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

    Running Windows XP Home, I want to change hard drive as described above.

    As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

    Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?
    Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

    Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

  • Windows 7 computer portable HARD drive connected to a professional XP S3

    Windows 7 computer portable HARD drive connected via USB to a desktop XP Professional SP3 PC.

    PC shows the folders, I have access to the folder of Photos, but cannot access the Documents folder where files I need. I tried to share the folder, but it does not work.

    Any suggestions please?

    Probably, this can be corrected by taking possession of these files / directories.  Once you do this, however, you will find probably your permissions in disarray try to re - install the drive in your computer to Windows 7...

    "How appropriate a file or a folder in Windows XP"

    <>http://support.Microsoft.com/kb/308421 >

    HTH,

    JW

  • Hi I reinstalled my Win XP Home because the current drive was getting old. But I installed it on a new hard drive connected as "Slave" but now he can't start

    I have connected the new hardrive as a 'slave', re-installed my Win XP even & re-patched everything on it including SP3, programs & ups back-ups, but oh no! the new hard drive when it is plugged in as a 'master', it does not start!

    But with the old hard drive connected as long as 'master', I have the option of "dual boot".

    I guess because my new drive is not a reader of "system"? I can see that my old drive is listed as 'system '. How to make my other even without having to re - install all over again? Thank you!

    Hi Fishlipps,

    Thanks for posting. Most likely you see it as your boot.ini is located on a drive corresponding to your system on a different drive. The easy way to do this would be to reinstall or do a repair on the computer installation. Please make a backup before attempting this.

    1.

    When the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

    2.

    When you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to the Setup screen, press ENTER.

    3.

    Do not choose the option to press R to use the Recovery Console.

    4.

    In the Windows XP licensing agreement, press F8 to accept the license agreement.

    5.

    Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

    6.

    Follow the instructions on the screen to complete the installation.

    Another option would be to modify the boot.ini located directly on the root of your drive. Below is a knockout with instructions on how to do it. However please backup all your data by doing one of them because both can make your computer unbootable.

    http://support.Microsoft.com/kb/289022 Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • E3200 and Buffalo NAS drive connection

    I recently upgraded to the E3200 of an older linksys router linksys wireless router.  I have a Buffalo NAS drive connected to one of the ethernet ports.  When I access the NAS from my computer (wireless connection), it is extremely slow to load the icons of directories and files not to mention to recover a file.  I mainly photos/music etc on the NAS.   Internet connection is fine and I don't have this problem with older router.

    Not sure if I need to tweak the settings of the wireless router or if it is something with Windows 7 (although my computer has not changed, only the router).

    Suggestions?  Thanks in advance.

    Try these troubleshooting steps:

    [A] with the help of the Cisco Connect software (if at all, you have installed the router using this software)

    1] open the software and go to the option that says "settings of the router.

    [2] then click on the option that says 'Advanced settings', which will take you to the router configuration page.

    [3] on the same set up page reduce the MTU size to 1400 auto.

    [4] then click on disable SPI Firewall Protection Security tab, uncheck the box filter anonymous Internet requests...

    [B] If you have not installed Cisco connect then you can connect to the router's user interface using its default IP address in the browser which is 192.168.1.1 and enter "admin" as password empty username field. This will take to the web interface of the router and then follow the steps as indicated above to make the changes.

    Then check the status of speed...

  • Cannot open all the files in the drive connected

    Hi, I'm new on connected drive.  I see all my files (pictures, videos, etc.) in the home screen, but when I click on one it wont open.  I just get a "sorry, unable to open...". ».   All files appear also faded.   Thanks in advance for any help!

    Hi @kennybelill ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop HP and problems with the HP drive connected. Here is a link to a document on how to work with the files.

    The other tabs could provide assistance.

    Thank you.

  • HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

    Hello

    HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

    I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

    I would try something possible at this time I have a lot of my data on the old disk.

    Thanks appreciate any suggestion.

    Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

    You need to do when you install Windows XP or you will get a blue screen and it does not start.

    Don't forget chang back when you put it in your drive home hard sata.

  • NSLU2 - cannot connect a network - xp home sp3 drive

    Hello!

    I have a network of two xp machines connected to a wrt54gl router (dhcp) a xp pro and XP home.

    I bought a NSLU2 unit. I successfully set up according to the instructions of a xp pro machine with a USB plugged into the port of disk1. It shows on this fine machine as a network device, as well as two shared folder (admin and disk1) without further delay. (A minor hiccup: I tried to serve as a dhcp client, but I couldn't for some reason, but it works very well with fixed ip.)

    However, on xp home, I can't connect at all. It does not appear in the My network, cannot connect to it with-. I can see the device in my work group, but that's it, if I click on explore, it hangs for a while, then gives a "no access, no doubt you have no authorization" error.

    I can still access it from the web interface, but otherwise no luck.

    I tried to create a user on the NSLU2 web interface with the same name as the users private XP, without success.

    Someone has an idea what to do?

    There is a resounding slap on my forehead. It was through the firewall.

    (Although now, I do not understand, how NSLU2 forced on another machine with the same parameters...) I just had to add the slug of the IP of the zone of confidence.

  • Connection and external hard drive for the wrt610n?

    How can I do.  can't stop to understand.  When I go to the page under its storage routers, but do I need to do, to make it work.

    I don't know what I did differently than before, but now his job.

  • Could not access the external hard drive on the WRT610N

    I recently bought the WRT610N router and updated the firmware version 1.00.02 B10 on it. I also have a 500 GB WD Caviar Green hard drive in an external enclosure to Koutech EEC320. I wanted to connect my HD in a configuration server network via the USB port on the router.

    The first time I hooked it up, everything worked for the most part very well: I could go to the tab of storage on the utility line of router, put in place actions and other things. The problem was that I could not really give administrator rights to access the actions I put in place on the hard drive, so I couldn't change the files or anything like that. I would try to put in place the administrative privileges in the sharing settings, but they would never appear in the summaries of the part. I even tried to change the share name of the 'Default' which appears at random at one time, but this caused the group to disappear her privileges, and the 'failure' share to disappear (although the usefulness of reserves still the name for him) which means I can't do another flaw).

    I have reset the router to try to get the sharing by default return, but now whenever I try to access the storage in the router utility tab, I get a blank screen, so I can't recreate all the actions on my HD Plus, every tab I try to access after the who end up in a screen blank until I restart my browser where all is well until I try to access the store again. This happens even after resetting the router several times and even reinstall the firmware once.

    Any ideas on how to solve this problem in order to access and edit files on my hard drive through my network?

    Yay! I got 'Default' on my HD! Now, it would be great if I could add permissions to actions so I can add more readers...

  • Can't see the new external hard drive connected to my iMac for my MacBook?

    Hi all

    I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

    It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

    File sharing on and everything seems normal.

    For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

    Any help appreciated.

    Thank you

    Hey Dr.Tobyk,

    Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

    I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

    Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

    See you soon

  • Peripheral USB take two tests at work and does not start with Time Machine drive connected

    I have a 2015 mid Macbook Pro 15 "work (so I can't afford to take this service for a period of days). My specs are:

    I am running the latest version of El Capitan, 10.11.4.

    My problem is that USB devices - such as Logitech USB headsets, USB sticks, external hard drives, etc. - always and I always say, require two plugins to be detected by the system. It doesn't work the first time. I always have to connect once, remove it and plug it in again.

    In addition, if I try to boot the system with my Time Machine/external USB HD drive, it won't start at all. Only if I reboot without all the devices connected it boot successfully.

    My questions are: is it a software or a hardware problem? And someone saw this before? I think it's a hardware problem, although the last notes of patch involve the last update of OS may have addressed a similar issue with audio devices. (This would affect my Logitech USB headset no doubt, but it did not help). If it is a hardware problem that requires a fix of the motherboard, I can't do it, since the new it's a working machine that I can't part with for a long period of time, unless SHE is willing to trade me a machine on-site. It does not affect other most operation every day except that I need to plug devices twice, all the time.

    Thank you, everyone.

    Try this-

    How to reset the NVRAM on your Mac - Apple Support

    Reset the management system (SCM) controller on your Mac - Apple Support

Maybe you are looking for

  • In FIrefox to develop edition, new tabs are always empty.

    When I click on a link, the new tabs works as it is supposed to. When I click on the plus sign at the top of Firefox, all tabs open empty. I do not get thumbnails of the most frequent sites and I don't get Google. One of these options would be great.

  • where can I find the instructions for keyboard & use explanations

    I don't know the meaning or usage of all symbols, i.e. f6, fn, ctrl, NumLock, etc.. How do I find explanations or peak of keyboard on my computer so I can copy for later use?

  • Wireless is MIA after reload of the OS

    I reloaded just the XP operating system on my Compaq Presario R3000. Now wireless can be found in network connections. When I look in the device Base System Device Manager, there are yellow mark points, HP integrated Bluetooth module, multimedia Audi

  • Need driver for Sharp AL-1551CS

    I recently bought a laptop Dell Latitude D531 with Windows Vista (business).   I was not able to find the driver on the line of my old printer.  It is a Sharp AL-1551CS (Copier, printer, scanner).   Can help you with the correct download?

  • Trying to install an optical mouse

    I have a Dell Inspiron 1545. That's the message, it gives me when I try to install the iHome FastTract optical mouse: Windows finds the driver for your device but encountered an error trying to install it. Mouse USB browser An error occurred during t