NTVDM. EXE has encountered a problem and needs to close when I tried to open a dos based program today. Is there any solution on the web?

Similar Questions

• Why the message (wuauclt.exe has encountered a problem and needs to close) when I start the computer?

  Operating system - XP

  Message asking if I want to send the problem to Microsoft.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• When you try to install Quicken 2012 on my laptap receive a "Setup.exe has encountered a problem and needs to close." Have tried a number of corrections suggested by the seller, but no luck.

  Uninstalling an older version of Quicken and all of its subfolders, used a utility of Quicken for clean system, deleted and reinstalled all .net platforms, tried installing using a user admin account and used the two install mode selective and secure, all with the same results. Seller now claims it's an operating system error, but I can not find similar problems in the forums.

  Sorry, that I have no more insight to the problem install Quicken otherwise than to post in the forum of Quicken, be sure to include things that you've already tried.

  As the msconfig error message is concerned, it's probably not related.  There is a service (IIRC, HP PML driver; see http://www.pchell.com/support/msconfig_access_denied_error.shtml) which causes this error message.

• HPSF.exe has encountered a problem and needs to close

  using pavilion hp Elite desktop, windows 7 Edition 150ff Home premium, receive a HPSF error message. EXE has encountered a problem and needs to close. I tried to download it again from the HP website, but I get a message saying "your system does not meet the minimum requirments for this update, update has been cancelled. (1602) my computer has a hard disk of 1 terabite with 8 GB of ram and I have very little installed above with the exception of 4 songs and microsoft office and student that I bought and Norton Internet Security.

  Someone can tell me why I get this message and how do I fix the problem, my office is wired but my printer is wireless, I have high speed internet and I have also a HP Envy 700-019 again at Christmas last year, which has a HD 2 terabite with 12 GB of ram and windows 8, desktop computers are 64-bit. Not used at the same time.

  This message means that the HP Support Assistant had a problem.

  I recommend to uninstall the application from the--> utility Control Panel programs & features and then put it back. You can use the charm of the search and the type of programs & features. Click on the above icon to call the utility.

  You can reinstall from the Recovery Manager.  Invoke the charm of the search and type in recovery and click the icon.

  

  Find the Recovery Manager from the list of drivers and applications and put a checkmark in the box to the left and then click install in the lower right corner.

  

• "NTVDM. EXE has encountered a problem and needs to close"error after installing the update of security KB2707511

  After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.

  I have a lot of customers running a 16-bit MS-DOS - program that receives the same error.  It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware).  By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.

• After you install the update, I am getting NTVDM. EXE has encountered a problem and needs to close

  OK a bit on my setup, I have a Server 2008 R2 as a DC area, and in my Department and the engraving, we have four XP Pro SP3.  After the engraving machine is updated Automatic last night when we try to access a MS-DOS 16-bit program that works, I get the following error.

  NTVDM. EXE has encountered a problem and needs to close. We are sorry for the inconvenience.

  Error signature

  AppName: ntvdm.exe AppVer: ModName 5.1.2600.5512: ntvdm.exe

  ModVer: 5.1.2600.5512 Offset: 000206f1

  See http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/ntvdmexe-has-encountered-a-problem-and-needs-to/3ad3ae01-9685-4155-8d85-28f979e599af

• An error BACK porogram get running. "NTVDM. EXE has encountered a problem and needs to close. "

  Running a program back that I have used for years, network of four computers, now with the same message. "NTVDM. EXE has encountered a problem and needs to close "what should I do?

  There seems to be a problem with KB2707511:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/ntvdmexe-has-encountered-a-problem-and-needs-to/3ad3ae01-9685-4155-8d85-28f979e599af?page=1

• Issue of games - exe has encountered a problem and needs to close

  Hello world

  I was wondering if there was someone out there who could help me.

  I can load a game on my laptop (demanding nothing, just football coach) but when I then open the game when loading I get the following message

  "(whatever_the_game_is).exe has encountered a problem and needs to close." We are sorry for the inconvience.

  Can anyone recommend a way to resolve this?

  Thanks in advance

  Rich

  Hi Rich

  Using original or copy?

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Patcher.exe has encountered a problem and needs to close. -Windows xp support center.

  Whenever I try to play a mmorpg called jade dynasty, on the Launcher, an error report appears asking me to send or do not send.

  "Patcher.exe has encountered a problem and needs to close."

  How should I do?

  I already tried to reinstall the game and update my video driver and it does not work.

  Hello

  Welcome to the forum of responses to Windows Vista.

  It's Windows Vista forums. To get the best possible answers to your question, I suggest you to report your query in the XP media center discussion forum.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.Windows.mediacenter&lang=en&CR=us

  Let us know if that helps.

  Kind regards
  Anthony
  Microsoft technical support, please visit our Microsoft answers feedback Forum and let us know what you think.

• "update.exe has encountered a problem and needs to close. We are sorry for the inconvinience.

  Hello

  Uses a deployment tool to deploy the patches in the environment, and this time after doing so I am getting an error below

  "update.exe has encountered a problem and needs to close. We are sorry for the inconvinience.

  Please help its critics.

  Concerning

  Vikram

  It is a forum for specific consumers.

  You will find appropriate support (such as it is) in this forum-online http://social.technet.microsoft.com/Forums/en-US/itproxpsp

• LifeCam .exe has encountered a problem and needs to close

  Im trying to use my lifecam on my xp computer, but it does nothing, but saying lifecam .exe has encountered a problem and needs to close. That's all he does whenever I open it help me!

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  According to the description, you get a message error "Lifecam.exe has encountered a problem and work stoppage.

  1. are you aware of changes to the computer before the show?

  2. What is the model number of the device?

  3. What is the brand and model of the computer?

  Method 1:

  I suggest you perform the steps mentioned in the article.

  From Lifecam software "Application has encountered a problem and needs to close. We are sorry for the inconvenience"error message.

  http://support.Microsoft.com/kb/2027807

  Method 2:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Step 1: Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Hope this information helps. Get back to us if you have more queries about Windows.

• dfsvc.exe has encountered a problem and needs to close.

  I had to down load a program to work on my computer at home and I get this message, the program is called RightNow CX: dfsvc.exe has encountered a problem and needs to close.  The assistance of technicians of office have no idea what it is or how to fix it.  I did a scan for viruses with AVG and spyware using SuperAnti Spyware and spybot. the last thing I downloaded from this website:www.creative.com.  I tried to do a system restore and my computer and I get a message saying that the restore was not successful. I need help

  Take a look at this thread...

  http://social.msdn.Microsoft.com/forums/en-us/winformssetup/thread/78bff413-5770-4d1a-86af-ba9fe3750a9e/

  .. .and see if none of these solutions helps.

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Need help for - LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  Trying to get my Microsoft Life Cam HD5000 video work.  He worked until a week on Windows XP there and all of a sudden stopped sending this message

  LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  I uninstalled the program and reinstalled and this notice appears again with this 'mistake' being

  AppName: lifecam.exe AppVer: 3.60.253.0 ModName: kernel32.dll

  Any ideas on how to fix as all drivers are up-to-date and update of the software.   As mentioned he wasn't working a week so there is no idea why the video suddenly stopped.

  Concerned

  Hi Concerned25,

  This problem may occur if you have one of the programs listed below, installed in conjunction with the lifecam.

  Earthlink total access.

  Venturi VClient

  Nero

  Studio9 Pinnacle systems software

  F-Secure internet security

  Dell Web cyber coach

  AOL or Yahoo toolbar

  FixIt utility.

  To solve this problem and find workarounds, see the link below.

  http://support.Microsoft.com/kb/953692

• Installation of QuickBooks 2012 gives the error "set.up.exe has encountered a problem and needs to close."

  I try to install new software Quickbooks 2012 on the computer that is running Windows XP. The installation will start and get error "set.up.exe has encountered a problem and needs to close." I spoke with Quickbooks technical support on this issue, but they have been unable to solve the problem. I have read several of these posts on this forum about this kind of mistake, but none seem to be directly related to my situation. I plan to try to reload the Windows XP operating system, but unfortunately, the CD is missing. I'd appreciate any help that anyone could have.

  original title: setup.exe error

  Hi Bill Gammon,.

  You can go ahead and try the suggestions and if the problem persists then I you suggest to run the Microsoft Fixit and then try to install Quickbooks 2012.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if that helps.