Number of full model for Pavilion G7? where?

How can I find the complete model number?  I have 2 memory cards. 1 4GB and 1-2 GB.

I need of more memory for photoshop.

My system doesn't state that 4 GB?

8.1 to win

Thank you

Hi again

G7 should support the 8 GB of memory, it's 4 * 2

2 customer accessible/upgradable memory

Supports dual-channel memory

Supports up to 8192 GB of RAM DDR3/1333 MHz system

Supports the following configurations:

● 8192 MB total system memory (4096 × 2) not supported on 32-bit
operating system)

Tags: Notebooks

Similar Questions

  • very portable slow.full check for Spy virus where ect.

    Help, please.

    Hello

    See if that helps you.

    "Optimize Windows Vista for better performance"

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

    And also scan using this program.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

  • need recovery disc for Pavilion 730n

    need recovery pavillion 730n discs - crashed drive

    Hello

    If the number of full model of your PC is a730n, your recovery disks are available here.

    Kind regards

    DP - K

  • Want 2 13 x: find the full model number

    How can I find the complete model number? I have a product # J9M64UA #ABA but I need the complete model including the info number after desire 2 13 x.

    This is the full model number - HP ENVY x 2 13-j002dx

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on Thumbs Up white on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Caddy optical Bay for Pavilion dv4 - 1228ca - where to find?

    Anyone know where to find less expensive optical Bay caddy for Pavilion dv4 - 1228 laptop computer ca?

    Try eBay, however, could not find one with the connector appropriate; This one

    http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=198

    would work, but it was a little overpriced for an investment of old machine... Any ideas, please?

    TIA

    Newmodeus is about the only game in town for this kind of product. I know an organization called jacobsparts.com in my hometown has some drive hard generic 2d optical Bay adapters, but they wouldn't look nearly as good as that of your machine.

  • How do I download the driver of fingerprints for laptop models: HP Pavilion

    How do I download the driver of fingerprints for laptop models: HP Pavilion

    You should visit HP support:

    http://support.HP.com/

    Search for your PC model and download the finger print driver.

  • where I can find drivers for Pavilion dv6-7055er enemy: bcm20702a0, simple communication controller pci

    where I can find drivers for Pavilion dv6-7055er enemy:

    bcm20702a0

    simple communication controller PCI

    Please download and install the driver Intel Management Engine Interface (MEI) from the following link:

    http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56158.exe

  • My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM. Is it possible to be thr

    My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM.

    Is it possible to be done through Oracle distributed Document capture (ODDC) and if it is possible how to connect ODDC with the client browser. Please suggest

    Ok. So, the answer is certainly: Yes, it is possible.

    The part of analysis, this is exactly what ODDC is good for. Unless you have the license already, however, you may have to go with the product to Capture Oracle WebCenter (large companies), which provides the necessary also.

    Regarding the validation and storage, ODDC/ODC/WebCenter Capture can commit images scanned at several depots, including University Complutense of MADRID (URM can be considered a Complutense University of MADRID with a specific purpose / several modules or components under voltage and configured). So, technically, he has no problem.

    When I have little doubt, however, is the meaning of the scenario - declaring an item as a record is an important event in the life cycle of the document - a record is often (or always) cannot be changed to ensure the integrity and non-repudiation of information. In this perspective, a direct validation of a recording of a scanning system (where errors such as bad scans, lack of pages, etc can be expected, particularly if the scanning is performed by the end user in a distributed fashion - so, not very experienced) seems a little dangerous.

  • Where are the models for the personalized stamps?

    I tried to follow the directions here: https://acrobatusers.com/tutorials/creating-a-custom-dynamic-stamp-infographic, but to step #2 when I opened the browser, no choice of models was available.  Where should I use to find?

    Hi Linda Kiss,

    As noted in step #2, when you click on create custom stamp, you will get a box. You must click on Browse...

    Then you get a window where you can search for and select the image file you want to use as a stamp.

    Make sure you change the type of file extension to one in which the file is saved on the system as it is default defined as "Acrobat PDF files (.pdf). If it is saved as a PDF so no need to change.

    Once you select the file. Click Open.

    Let us know if you have still any question or you refer to something else.

    Kind regards

    Meenakshi

  • need driver sd for pavilion hp low graded victory 8 to 64-bit 7pro

    need driver sd for pavilion hp low graded victory 8 to 64-bit 7pro

    having been informed by HP suport, that there is no compatibility and none is available for a reader of sd card on my model # p7 - 1436 s that came with win 8 but was down ranked at point of purchase for win 7 pro 64-bit.  computer works CAD - CAM systems and must be in the format win 7, but there seems to be no pilot cross on the sd card reader.  CPU sees the card but do not charge card information or even show it in the icon drop-down computer showing what is in the processor.

    SD card works perfectly in another cpu, so the problem is in mine.

    Hello grunge.

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are having problems for your card reader to work in Windows 7. The card reader part number 644491-001 is used in more than 200 computers of HP Desktop running the Windows 7 operating system and more. I don't see not all pilots on all systems so I'm assuming it uses the default Windows drivers. As it does not appear on your system is running Windows 7, I will assume that it is related to a Windows 7 problem that a drive letter is not assigned to external storage devices.  I provided you with some steps to try to solve this problem for your below:

    Step 1. Click Start

    Step 2. Click on Control Panel

    Step 3. Click on Administrative Tools

    Step 4. Click on computer management

    Step 5. Click on disk management

    If he has not seen here, go to 'Action' in the menu bar, click on "Scan drives" and it should come

    If it does not have a drive letter assigned? If this isn't the case, follow the instructions below:

    Step 1. Right click on the removable drive

    Step 2. Click on change drive letter...

    Step 3. Assign a drive letter

    Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

  • Missing drivers for Pavilion dv6775 Entertainment Notebook

    Pavilion dv6775 Entertainment Notebook

    Only, I rebooted the laptop with Win7 Pro. The HP site for the model displays options for Vista only.

    Everything worked OK except two yellow '! ' in Device Manager.

    They are under the tab "other devices."

    Both are "Base system devices.

    Under properties are:

    Bus PCI 7, device 9, function 3

    Bus PCI 7, device 9, function 2

    Any ideas?

    Thank you very much for the research.

    When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

    For concrete measures to be taken when you install Windows 7 on your computer, see the Windows 7 Upgrade Guide for HP laptops by CherylG . This guide will also refer you to the drivers for your computer to run completely under Windows 7. Please refer to "Part 2 - level 2 models" for information specific to your model.

    One of the drivers should fix your problem (1st is more ancient, 3rd is most recent).

    Driver of 5 in 1 Ricoh card reader

    Ricoh driver of 5 in 1 (Version 3.51.01) card reader

    Ricoh driver of 5 in 1 (Version 3.52.02) card reader

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Processor and fun of rear cooling fan runs at full speed on Pavilion HPE h8-1120it

    Hello, since yesterday when I turned on my HPE h8-1120it HP Pavilion the CPU fan and rear fun cooling are always rotating at high speed, and they never stop. I have nothing no hardware changes, no change in software. Two days I will I work all day without problem, I turn off as usual the PC, I'm going to bed and then yesterday morning I turned on and now I have this problem. The PC is brand new (I bougth it about 1 month ago). There is no problem of temperature (now I 19 ° C on my computer room).

    Read another similar post I figured might be a bios problem. The version of the bios is 7.11, I tried to see if there is an update of canno't ' t there, but I find an update of the bios for Pavilion HPE h8-1120it.

    I burned a CD with the hardware HP Vision Diagnostic and I run the pleasure of tests and they all passes. During these tests, the pleasure seem to achieve the right speed in the progress of the test.

    I noticed this strange thing: when I bought the PC I immediately activated in the bios the use of VT to use hardeware virtualization with VMWare player. Yesterday, I found this setting changed and disabled and it's very strange because I did not change the values in the bios.

    What can I do? The noise of the fans at full speed is impressive, that I can't work on these conditions!

    Thank you

    Davide Angeli

    Hello

    There are not many fans rated at 4 000 rpm. With this type of fan RPM coupled with your observation that VT missing then your PC seems to have a problem.

    Maybe it's time to contact the HP Support.

    HP support number is 800-474-6836 or 800-HPINVENT or online here.

  • Download driver for card miniport Microsoft virtual wifi for Pavilion dm3 win7 64-bit

    where can I find and download the driver for "Microsoft virtual wifi miniport card" for Pavilion dm3 win7 64-bit. The diagnosis says that this driver is problematic and obsolete

    Maybe the next version will fix this.

  • Remove the back panel for Pavilion AIO 23Touch q012

    How can I remove the back panel for Pavilion AIO 23Touch q012. I am wanting to upgrade my RAM. I had all the shots to come off, but there seems to be something in the Center which is not coming loose. There is a notch 'lock', but nothing to explain how to use it, it still means something to remove the back. All other indications I can find are for other models.

    See if this info is in your guide of upgrade and maintenance

    http://support.HP.com/us-en/product/HP-Pavilion-23-q000-all-in-one-desktop-PC-series-(touch) / 7902091/manuals

  • Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

    Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

    OVERVIEW

    Introduced June 2012
    Discontinued October 2013
    Model identifier MacBookPro9, 1
    Model number A1286

    Edit: in fact this model number is used for some units, from a late model ' 08.

Maybe you are looking for

  • Satellite A500 - Toshiba tools after the new installation of Windows 7

    Hi I was wondering if my applications which have been pre installed on my Toshiba Satellite A500 would transfer through on a custom Windows 7 Setup. I did an upgrade from Vista Home Premium to Windows 7 Home Premium, but I want to do a full installat

  • I want to remove unused programs, how do I know which ones to delete it so I do not perform the actual function of the others?

    My new laptop Toshiba seems to be slow since I loaded a diving 3 the other day '' only '' scrubber to clean and wipe the file off-farm. The wheel turns just I was looking for in my programs, and there seems to be a lot of programs with the same or ve

  • How to separate a number of any output?

    The following was obtained by the standard output of the 'calling exec system"window vi. My question is how to separate the "real value read" any exit numbers (in bold) and them separately. 37 result = OK, line = 0x5D, RW, 0x21, value #Read VOUT_COMM

  • My question mark on keyboard shows like E

    My question mark on the keyboard presents itself as an E... I tried to go into the settings control Panel or regional, but it doesn't seem to work and it seems that other tabs work properly or the other... Please help as this is very frustrating!

  • [Z30 Simulator]

    Hi all I want to have Sim Z30. I have tryied to (see attached images). But I have no Z30 Sim. What will happen? And please help me get Z30 Sim. Thank you very much. Dennis.