Number of the caller appears on my other iphone too

Number of the caller appears on my other iphone too, any suggestions?

Yes.

Do not use the same Apple ID on more than an iPhone.  Each must be treated as if another person is the owner.

Tags: iPhone

Similar Questions

  • Get the number of the caller before ringing

    Hello

    I want to get the number of the caller when a new call coming but before the device starts ringing. Is it possible to get? Can someone help me?

    Thank you!

    callIncoming fires before the unit begins to ring. You can use Phone.getActiveCall... to get the number

  • Allow the client to modify the desktop version and update other versions too?

    Hello

    I was wondering if my client had to make changes to the site office by broswer edition, if these changes would be reflected in the other versions of the site too (Tablet and phone). Or would I need to make these changes separately? Thank you

    If you use the options of text synchronized in Muse, you should have no problem

  • My Skype number does not appear as my purchased number at the front desk phones.

    When I shout, my purchased number does not appear in receiving lines.

    Can I receive calls on my purchased number and call out the purchased number but when I call the number purchased the Skype number being received is not mine. I can't find an answer to this problem or how to fix it?

    There is a very useful answer already posted:

    http://community.Skype.com/T5/Skype-number/want-to-set-up-your-online-number-as-caller-ID-go-here/m-...

    the short answer is that you must set your Skype phone number in the caller ID function: it's free.

  • Get the name of the caller from an application when the Crier - executing.

    Hi all

    Here, I'll be back with a new problem which goes as follows:

    Suppose that my xyz application stores some contacts (just like in the book addresses/phone book).

    Other contacts are by default stored in my Blackberry address book.

    Suppose I get a call on the handset with my app xyz running in background. All I need is to retrieve the name of the caller of the xyz application and view this name as"Akash Calling... ' instead of '+ 919999999788 calling... ". "assuming that the caller details are present in the said application, his name and none of the details in the actual address book. Is it feasible. If so, please suggest.

    Thanks in advance!

    everything in that this is done incoming call:

    1. you retrieve the number of the caller in the earpiece of the phone

    2. you get the name that corresponds to this number in the background application

    3. you create an entry in address book with this name and number

    After callIncoming is executed, the system call screen is displayed. The phone app checks if it can find the number in the address book. It finds the number and displays the name.

    After that the call is accepted or rejected remove you the address book entry.

  • Can't answer the call of the notification bar

    When I use my phone and a call comes in the call appears as a mini bar at the top, as is explained in the guide. However, I am not able to answer the call through this! Please help, I don't get a lot of calls, but I want to be able to respond to those who I have received! It works fine if the phone is idle and full screen comes up. Thank you.

    Just click on the blue writing to see. Or if you still have problems to start in safe mode, press the power button / stop and tap on disable. With safe mode, a message will appear.

  • IPCC can pass the caller to a mobile phone ID?

    I have a script that during off-peak hours, transfer callers to a mobile phone that is answered by a technician. I have a request to the technician to have ALI on the mobile phone. Demand occurred because he missed a call from our ISP and when he tried to call the missed call the number back, he saw was our main number and no voice message was left.

    Is this possible? If so, how could I do it?

    I know that we have currently to override Caller ID with our main number of the "call transform mask party" on the browse list.

    Any help would be appreciated.

    Thank you.

    You can set your MAC to achieve this. There are two options:

    1. change the RL not to transform the call number, however, it will affect everyone.

    2. If you have a CCM 4.0 or higher you can proceed as follows:

    Create a new list of road that points to the Gulf war, don't do any transformation

    Create a new pattern of route for outgoing calls, place it in a new partition,

    Create a new CSS that has access to this partition

    Assign this CSS to ports CTI associated with this jtapi group used by the application of the src

    This way when the CRS needs transfer a call outside it will use difrferent list of route, which does not perform the transformation.

    I hope this helps.

    Chris

  • I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

    I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

    It has been much discussed.

    See my solution in this post:

    Re: Re: iWeb Publishing Solution in El Capitan

  • Display of the number of Skype the person is the call to.

    Hi, I have several numbers for the different areas of my business. For example. Sales and support.

    How will I know what Skype number, the appellant wrote? So I can't answer with the correct service name?

    I contacted the Support of Skype.

    Skype doesn't have this feature which is absolutely ridiculous. All other providers has at least the possibility to disable the number of the person calling and show the called number.

  • quick question on the call to a Skype number

    say if I buy a Skype number to receive calls only.

    do you need Skype credit to receive calls, or is going to use the credit when I make a call.

    tcctcc wrote:


    1 do you need Skype credit to receive calls,

    2 or is going to use the credit when I make a call.

    Hello
    1 n °

    2. Yes.

    TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.

    I recommend that you always run the latest version of Skype: Windows & Mac

    If my advice helped to solve your problem, please mark it as a solution to help others.
    Please note that I usually do not respond to unsolicited private Messages. Thank you.

  • How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

    How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

    Welcome to the Apple community.

    I'm afraid that is what happens when you share an Apple ID.

    Ideally you should each have your own ID and use family share for share purchases, but at least you would be better to have your own ID's for everything except iTunes.

    I suspect that your problem is that you share an ID for FaceTime, you must either stop this or make sure that you have only and that your caller ID is only your phone number.

  • PLS-00306: wrong number or types of arguments in the call to 'XXC_AMOUNT' ORA-06550

    Hi all

    CREATE OR replace PROCEDURE Xxc_amount (v_item_id IN NUMBER,

                                             v_amount  OUT NUMBER,

                                             v_size    OUT NUMBER)

    IS

      v_size   NUMBER := NULL;

    v_amount NOMBRE;

    START

        BEGIN

    CHOOSE conversion_rate

            INTO   v_size

    FROM mtl_uom_class_conversions

            WHERE  inventory_item_id = v_item_id -- 2289;

            v_amount := Nvl (Trunc (v_size), 0);

    -RETURN (cp_cartons);

        EXCEPTION

            WHEN OTHERS THEN

              v_size := 0;

              dbms_output . Put_line ()' Error getting Item Id:'| V_ITEM_ID );

        END ;

    dbms_output. Put_line ('Qty-->' || v_amount );

    dbms_output. Put_line ('Qty1-->'|| v_size );

    END ;

    DECLARE

        amount NUMBER;

        v_size NUMBER;

    START

        Xxc_amount (2289, amount, v_size);

    dbms_output. Put_line (amount || '--' || v_size );

    END ;

    ORA-06550: line 5, column 5:

    PLS-00306: wrong number or types of arguments in the call to 'XXC_AMOUNT '.

    ORA-06550: line 5, column 5:

    PL/SQL: Statement ignored

    Thank you

    Post edited by: 994122 changed the name of the procedure to Xxc_amount Xxc_amount1

    Simply remove the declarations of the v_size and v_amount and it should work.

    The following text compiles and works for me when I call:

    CREATE OR replace PROCEDURE Xxc_amount (v_item_id IN NUMBER,
                                            v_amount  OUT NUMBER,
                                            v_size    OUT NUMBER)
    IS
    BEGIN
        BEGIN
            SELECT conversion_rate
            INTO  v_size
            FROM  mtl_uom_class_conversions
            WHERE  inventory_item_id = v_item_id; -- 2289;
            v_amount := Nvl (Trunc (v_size), 0);
        --RETURN (cp_cartons);
        EXCEPTION
            WHEN OTHERS THEN
              v_size := 0;
              dbms_output.Put_line ('Error in Getting for Item Id :'|| v_item_id);
        END;
        dbms_output.Put_line ('Qty-->' || v_amount);
        dbms_output.Put_line ('Qty1-->'|| v_size);
    END;
    
    DECLARE
        amount NUMBER;
        v_size NUMBER;
    BEGIN
        Xxc_amount (2289, amount, v_size);
        dbms_output.Put_line (amount || '--' || v_size);
    END;
    
  • I just bought first elements13 and I installed it. But whenever I try to get my license number, an error message appears that says that my computer is not connected to the internet. I've tried everything. Help!

    I just bought first elements13 and I installed it. But whenever I try to get my license number, an error message appears that says that my computer is not connected to the internet. I've tried everything. Help!

    Check your hosts among other common problems, sign in, activation or connection errors. CS5.5 and later, Acrobat DC

  • PLS-00306: wrong number or types of arguments in the call to 'UPDATE_ORDER_NUMBER_SEQUENCE '.

    Hi Please help me solve the error given by this procedure

    TEXT

    --------------------------------------------------------------------------------

    PROCEDURE UPDATE_ORDER_NUMBER_SEQUENCE)

    sequenceName IN VARCHAR2,

    Inc. in full)

    AS

    stmt VARCHAR2 (2000);

    number of l_n;

    Start

    BEGIN

    -change the increment to Inc.

    stmt: = 'ALTER SEQUENCE | sequenceName | ' INCREMENT ' |

    Inc.;

    TEXT

    --------------------------------------------------------------------------------

    dbms_output.put_line (' execution "' | stmt |) '''');

    EXECUTE IMMEDIATE stmt;

    -Read the following value

    stmt: = "SELECT" | sequenceName | '. DOUBLE NEXTVAL ';

    dbms_output.put_line (' execution "' | stmt |) '''');

    EXECUTE IMMEDIATE stmt in l_n;

    -change the increment of 1

    stmt: = 'ALTER SEQUENCE | sequenceName | ' INCREMENT OF 1';

    dbms_output.put_line (' execution "' | stmt |) '''');

    EXECUTE IMMEDIATE stmt;

    EXCEPTION

    TEXT

    --------------------------------------------------------------------------------

    While some OTHER THEN dbms_output.put_line (SQLERRM);

    END;

    end UPDATE_ORDER_NUMBER_SEQUENCE;

    following error please help me solve this error

    ERROR on line 1:

    ORA-06550: line 1, column 7:

    PLS-00306: wrong number or types of arguments in the call to

    'UPDATE_ORDER_NUMBER_SEQUENCE '.

    ORA-06550: line 1, column 7:

    PL/SQL: Statement ignored

    Well, the error message is pretty self-explanatory, isn't it? What you use

    to call this procedure actually raises this error.

    However, you have not posted the SQL that actually calls this procedure

    so please post that.

    That said, the whole procedure seems wrong - what business requirement is there for

    edit sequences? This isn't normally how they should be used.

  • PLS-00306: wrong number or types of arguments in the call

    Hello

    I get this error when I run the script to test below:
    < font color = "red" >
    PLS-00306: wrong number or types of arguments in the call to 'SPLIT_AMOUNT '.
    < / make >

    This script is to test that the package below that I wrote. It seems to use the same 9 parameters of the same type:

    TEST SCRIPT+ *.
    declare
      TYPE g_table_number  IS TABLE OF  NUMBER INDEX BY BINARY_INTEGER;
      p_customer_trx_ids        g_table_number;
      p_total_amount_to_apply   NUMBER := 10;
      p_total_amount_to_adjust  NUMBER;  
       --
      p_result                  NUMBER;
      p_message                 VARCHAR2(200);
      p_payment_schedule_ids    g_table_number;
      p_terms_sequence_numbers  g_table_number;
      p_apply_amounts           g_table_number;
      p_adjust_amounts          g_table_number;
    begin
      p_customer_trx_ids(1)        := 23613;
      p_customer_trx_ids(2)        := 23614;
     hirap.split_amount
      (
       p_customer_trx_ids        
      ,p_total_amount_to_apply   
      ,p_total_amount_to_adjust 
      ,p_result                  
      ,p_message                
      ,p_payment_schedule_ids   
      ,p_terms_sequence_numbers 
      ,p_apply_amounts          
      ,p_adjust_amounts         
      );
      for i IN p_customer_trx_ids.FIRST .. p_customer_trx_ids.LAST LOOP
        dbms_output.put_line( 
        i || ' p_customer_trx_id: ' || p_customer_trx_ids (i) || ' p_apply_amounts(i): ' ||
         p_apply_amounts(i) || ' p_adjust_amounts: ' || p_adjust_amounts(i) );
      END LOOP;
    end;
    /
    PACKAGE+ *.
    CREATE OR REPLACE PACKAGE hirap
    AS
    TYPE g_table_number  IS TABLE OF  NUMBER INDEX BY BINARY_INTEGER;
    
    PROCEDURE split_amount
      (
       p_customer_trx_ids        IN   g_table_number
      ,p_total_amount_to_apply   IN   NUMBER
      ,p_total_amount_to_adjust  IN   NUMBER
       --
      ,p_result                  OUT  NUMBER
      ,p_message                 OUT  VARCHAR2
      ,p_payment_schedule_ids    OUT  g_table_number
      ,p_terms_sequence_numbers  OUT  g_table_number
      ,p_apply_amounts           OUT  g_table_number
      ,p_adjust_amounts          OUT  g_table_number
      );
    
    END hirap;
    /
    
    CREATE OR REPLACE PACKAGE BODY hirap
    AS
    PROCEDURE split_amount
      (
       p_customer_trx_ids        IN   g_table_number
      ,p_total_amount_to_apply   IN   NUMBER
      ,p_total_amount_to_adjust  IN   NUMBER
       --
      ,p_result                  OUT  NUMBER
      ,p_message                 OUT  VARCHAR2
      ,p_payment_schedule_ids    OUT  g_table_number
      ,p_terms_sequence_numbers  OUT  g_table_number
      ,p_apply_amounts           OUT  g_table_number
      ,p_adjust_amounts          OUT  g_table_number
      )
    IS
      l_total_pay_sched_amount   NUMBER;
      l_customer_trx_id          NUMBER;
      l_amount_due_remainings    g_table_number;
    
      CURSOR pay is
            SELECT p.payment_schedule_id
                  ,p.terms_sequence_number
                  ,p.amount_due_remaining
            FROM   ar_payment_schedules_all p
            WHERE  customer_trx_id = l_customer_trx_id
            AND    p.terms_sequence_number =
                  (SELECT  min(p1.terms_sequence_number)
                   FROM    ar_payment_schedules_all p1
                   WHERE   p1.customer_trx_id = l_customer_trx_id
                   AND     p1.status          = 'OP'
                  );
    
    
    BEGIN
      p_result := 0; -- means OK
    
      -- read the payment schedule for each transaction and store values and totals:
      FOR i IN p_customer_trx_ids.FIRST .. p_customer_trx_ids.LAST LOOP
        l_customer_trx_id          := p_customer_trx_ids(i);
        l_total_pay_sched_amount   := 0;
          BEGIN
            OPEN  pay;
            FETCH pay INTO
                   p_payment_schedule_ids(i)
                  ,p_terms_sequence_numbers(i)
                  ,l_amount_due_remainings(i);
    
            CLOSE pay;
            l_total_pay_sched_amount   := l_total_pay_sched_amount + l_amount_due_remainings(i);
         
          EXCEPTION WHEN NO_DATA_FOUND THEN
            fnd_file.put_line(fnd_file.LOG, 'Transaction does not exist for CUSTOMER_TRX_ID: ' ||
                              p_customer_trx_ids(i) );
            RAISE;
          WHEN OTHERS THEN
              RAISE;
          END;
      END LOOP;
    
      -- save values for each payment schedule based on total
      FOR i IN p_customer_trx_ids.FIRST .. p_customer_trx_ids.LAST LOOP
        p_apply_amounts(i)         := round
                                        (
                                         l_amount_due_remainings(i) / l_total_pay_sched_amount
                                         * (p_total_amount_to_apply + p_total_amount_to_adjust)
                                         , 2
                                        );
        p_adjust_amounts(i)        := l_amount_due_remainings(i) - p_apply_amounts(i);
    
      END LOOP;
    
    EXCEPTION
      WHEN OTHERS THEN
        p_result := 2;
        p_message := 'SQLCODE= ' || SQLCODE || ', SQLERRM = ' || SQLERRM;
        fnd_file.put_line( fnd_file.LOG , TO_CHAR(SYSDATE, 'HH24:MI:SS') || ' - ' || p_message );
    END;
    --
    END hirap;
    /
    Does anyone know what is the problem?

    Thank you
    Steve

    Hi, Steve,.

    The package contains a data type called g_table_number and also a procedure called split_amount.
    That does not create another data type (different), also called g_table_number, outside of the package, any more that it prevents you from creating another procedure, also called split_amount, also. When you want to reference the data type or the procedure outside the package from the package, then you must prefix the name with the name of the package. You do this correctly when you reference the name of the procedure of your anonymous block:

     hirap.split_amount
      (
       p_customer_trx_ids     ...
    

    Now you must do the same when you reference the data type:

    declare
      p_customer_trx_ids        hirap.g_table_number;
      p_total_amount_to_apply   NUMBER := 10;
      p_total_amount_to_adjust  NUMBER;
       --
      p_result                  NUMBER;
      p_message                 VARCHAR2(200);
      p_payment_schedule_ids    hirap.g_table_number;
      p_terms_sequence_numbers  hirap.g_table_number;
      p_apply_amounts           hirap.g_table_number;
      p_adjust_amounts          hirap.g_table_number;
    begin ...
    

    If you do not create another type of (different) data outside of the package, it will be the same as the type of data inside the packaging, even if the name is the same and they are defined in the same way. The package expects the arguments of the type hirap.g_table_number, so you have to give the hirap.g_table_number of type arguments.

Maybe you are looking for

  • My installation of Virtual PC 2007 hangs

    Hello I am facing a very annoying problem that seems now more and more frequent.  Virtual PC keeps closing without any warning. I am running Virtual PC 2007 on my Windows XP Professional SP3 host. I use Virtual PC to run Windows 2003 R2. WHAT I TRIED

  • WPA2-Personal wireless network, which is not yet in wireless networks accessible to the general public?

    Original title: lost our connection to network WPA2-Personal wireless internet which is not even listed as an option to connect to the internet, how do solve us this problem? Our WPA2-Personal wireless network fails to connect to the Internet and not

  • Email - pop3 - valid - bis - blackBerry Smartphones do not receive emails

    I'm new to blackberry and I have a new storm 9500 series of verizon.  I have installation three (personal) e-mail - a yahoo mail and two POP3 accounts.  My yahoo account seems to work perfectly, but the other two pop3 do not seem to receive at all. H

  • How to download a library of color of the Cloud?

    I created a library of color palette in Photoshop. I want to share the library with my colleagues at work, complete with color names. I shared the link via the cloud and checked "allow downloads" but no one is able to download. Does anyone know how t

  • UserSession null and PropertyProviderAdapter

    I followed the example of vsphere-wssdk-provider in the Web Client SDK.  The library using vsphere client I'm recovering vCenter session information using vise.usersession.UserSession and vise.usersession.UserSessionService.  The example implements a