NVIDIA 7300 GT does not... XServe 2.1 video card?

Similar Questions

• computer does not start after installing video card

  I, m new here so please bear with me.  I have a PC HP Pavilion Media Center TV (m7434n) I'm trying to replace the video card (Nvidia GeForce 6200SE with Turbo Cache) in. I am trying to replace it with a Nvidia EVGA 8400GS. I delete all the nvidia drivers, make sure that the pci-e card is used in the implementation. I have then to remove the old card and install a new one. When I try to start the computer, fans turn on but that's all.  There is nothing on the monitor.  The computer does not start. I replaced the power supply bestec 300 watts with a new antec brand 430 watt power supply.  When I reinstalled the old video card, the computer starts ok. I tried to replace the video card with an ATI Radeon HD5550 too and it's the same thing (the computer would not start), reinstall the old card and it starts up fine. Any help would be greatly appreciated.

  Gary,

  You may have a compatibility issue with the ATI HD 5550 and 2006 PC model.  I've seen other posts where ATI 5xxx video card did not work in older HP PCs.

  When you are referring to the installation of the older video card do you mean going back to the integrated video card?  Moving the video cable to the card installed?

  Install the NVIDIA 8400GS and connect the video cable. Now follow the instructions for clear the CMOS.

• a window said "flight simulator does not work with your video card. Make sure you have the latest drivers installed for your video card.

  Flight Simulator X not would allow me to get it because it says I need to update the video card. I think the problem was that I finally erase all memory of the computer using a special cd, because once I have done this and downloaded the software again, it stop working

  Hello el 24, welcome.
   
  There are a few possibilities as to why you see this message. There is a chance that you do not have your drivers graphics/display installed or configured correctly.
   
  We will need to know the brand and model of your computer to properly route you to the right path.
   
  Once we have this information, we can see if we can provide you a link to the Web site of the manufacturer of your PC to download the driver.
   
  Let us know,
   
  Thank you!

• Satellite A200: nVidia 7300 Go does not save the display settings

  I'm using the latest drivers available, but I can not even save display settings in nvidia
  Control Panel. For example if I turn down the brightness and increase digital vibrance and apply
  These settings, the next time that I reboot or run and release a game settings ALWAYS comes back to the
  their default values.

  I can't use a monitor external because the default brightness settings
  are very painful! They are literally blinding! Color settings do not record of either.

  Support for the New Zealands tech told me that it is a feature of Vista. What's supposed to be a joke?

  I also get bad interference on the screen lines when using an external monitor. It's very bad.

  Hello

  Have you noticed that emits from the first day with the factory settings?

• All usb ports not working does not correctly and the video card are not available with DVI cable

  I recently had a power surge and now none of my usb ports are usable, and I had to switch to analog cable to use my monito., also using the beside picture dvi hdmi cable sparkles.   The Device Manager shows everything works and the appropriate drivers are installed. IM using windows 7 with an asus motherboard P5nesli. IM pretty computer savy but it left me speechless. Cannot connect wireless mouse or keyboard, camera, printer, etc.  truble shooter says that it detects problems but wont tell me what they are and can't fix. Help... Thank you

  Hello

  What is the brand and model of the computer?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Uninstall all the USB controllers, download the latest USB driver on the computer manufacturer site, install on your computer and check the status of the issue.

  Remove and reinstall all USB controllers.

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Method 3:

  Update your drivers chipset system to the manufacturer's website and check the status of the issue.

• Nvidia optimus T440p does not work on Windows 8.1

  Hello

  I recently bought my new laptop (Lenovo T440p) which comes with built-in OPTIMUS Intel coupled by GeForce GT 730 M 1 GB graphics card. I tried to play games; However for some reason any show of game options, that my Intel HD card is used as a default graphics card. This suggests that the OPTIMUS technology does not properly switch the graphics card. System running on windows 8.1 Pro 64-bit. How to activate the switching Optimus?

  THX

  Majlou

  Try the latest drivers available on the nvidia site. They work very well on T440s + gt730m and W8.1, so there should be no reason not to work on your t440p. For some reason, put the Lenovo system update does not detect them.

  You can also check in the nvidia Control Panel, that optimus is not set to "only integrated graphics. They are 3 parameters, you can choose amongst (gpu integrated, discreet, auto).

  It is also an option in the nvidia Control Panel to display an icon in the taskbar with the current gpu being used, could be useful. Do not remember exactly where the option is good.

• NVIDIA Control Panel does not open

  I just reinstalled Windows 7 on my PC and the NVIDIA Control Panel does not open when I click on the link in the windows control panel.  I installed it by using Windows Update.

  Updates Windows reports that it installed properly but the Panel itself will be open from nt.

  Should I remove it and reinstall again?

  Version is Ver: 191.07

  Hi AdelaideJohn67,
   
  I suggest to uninstall existing NVIDIA Control Panel and restart the computer. Visit the NVIDIA Web site, download and install the drivers manually.

  http://www.nvidia.com/download/find.aspx?lang=en-us
  After installing the drivers, restart the computer and just do a right click on your desktop and watch if the NVIDIA Control Panel whether or not written.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Latestes Update 14.1.2 does not recognize the iMac graphics card.

  Hello

  I've updated my PS - CC to 14.1.2 and now my graphics card is not recognized.  The problem was supposed to have resolved this update.  I have an iMac 27 inch end 2012 with 32 GB memory and 1 TB of hard drive.  My graphics card is NVIDIA GeForce GTX 512 MB of 660M.   When you start PS - CC after the update, I received a message that my graphics card was not recognized and I need to update the driver.  As you have known, only Apple has updates to the graphics driver.  There is NO update driver on Apple.  Checking my preferences I don't have the ability to Open GL now.  My driver works well with 14.1.1.  I'll try to retreat towards the 14.1.1 if possible.  Any help would be appreciated!

  Dennis

  Here's an update of the above.  Just by chance, I found an interesting solution.  I restarted my computer and then open PS - CC 14.1.2.  I received the same message... PS does not recognize that your graphics card for people with disabilities advanced display options.  Otherword, NO Open GL graphics.  So, I closed PC - CC and rebooted just to see what would happen and... I don't have the error message.  Check the Preferrrence, found my recognized graphics card and I have Open GL.  If for some reason, the first time you open PC - CC 14.1.2 with iMac, your graphics card will not recognize.  Just close and open again and you'll get him back.  Weird!  Adobe, please fix this for us users of iMac!

  Dennis

• HP 7 G2 Dose does not install apps on SD card

  I recently that Got a HP HP TAB 7 G2 and it dose not allow me to install apps on SD card.

  I have read and found that Android 4.4.2 dose does not install apps on SD card on HP tabs.

  Y at - it another way I can do it, or I can hope an update or update Android 5.0 will allow me to do.

  I like to play games on the TAB and can install only 1 or 2 big games due to the lack of internal memory (4 GB).

  Any help would be greatly appreciated.

  Hey @ApoorvMishra ,

  Welcome to the HP Forums!

  I understand you are trying to install apps on your SD card instead of internal storage.

  Unfortunately, this is not a feature available on any Android device that does not have root access.

  There are methods available, but most require rooting the device, or by using the APKs HP could not support or encourage.

  Thank you.

• I downloaded a video from my camcorder, but it does not play because the video is MP4.

  I download the video from the camcorder, but it does not play because the video is MP4. How can I play download MP4 player

  The free version of Apple's QuickTime might be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Apple QuickTime:
  http://www.Apple.com/QuickTime/Download/thankyou/index.html

• I received a phone call from someone claiming to be windows and I have stupisly access to my computer, but does not give them the credit card details. This could be a problem

  I received a phone call from someone claiming to be windows and I have stupisly access to my computer, but does not give them the credit card details.  This could be a problem

  Hello Ann,.

  If you allowed them access to your PC, then it is a problem. I considered reinstalling my OS and change all my passwords. It would also make sense, if you use the online banking etc., to inform your bank that you have a security hole on your PC. This will alert them to anyone using your current password to the Bank etc.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Computer does not recognize my camera SD card

  We installed a wireless router and now the computer does not recognize my camera SD card. I have

  no idea how to solve this problem.

  Detail please...

  I can only imagine you saying the Autorun window not
  longer starts when you connect the camera via a USB cable. ?

  Maybe the auto run settings need to be adjusted:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  If you have external or internal drive do you have
  the same question when you insert the SD card?

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• the system does not accept my new credit card?

  Hello

  the system does not accept my new credit card? Pls help...

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena