NVIDIA driver cannot find compatible in Windows 8 RTM material, while it worked fine in Preview Release

Similar Questions

• Error: The drive cannot find the sector requested: 0x8007001B) during execution of the backup on DVD

  I tried to backup using a DVD, as usual, but without success. Back to the high status and Configuration States:

  Upward did not complete successfully
  Original title: back to the top has not completely filled.

  An error has occurred. The following information can help you resolve the error:)

  The drive cannot find the sector requested:
  0x8007001B)

  I've looked everywhere for this problem... need help :)

  Babette

  Hello

  1. have you done any software or hardware changes on your computer before this problem?
  2. have you checked with another DVD drive?
  3. using the Windows backup feature to backup?
  4 do you have third-party backup programs installed on your computer?
   
  To work on the issue, refer to these methods.
   
  Method 1:
   
  Step 1:
   
  If it's a DVD I suggest trying to backup to an external hard drive and check to see if you get any errors.
  
  Step 2:
   
  Temporarily disable the antivirus software and check if you are able to perform the backup.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
  
  Set up or change automatic backup settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings
  Change when you save your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-files
  Method 2:
   
  I suggest you check for errors of hard disk on the drive you want to back up.
   
  Check your hard drive to find errors in Windows 7
  http://support.Microsoft.com/kb/2641432
   
  NOTE: the steps also apply to Windows Vista
   
  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  Hope the information is useful.

• Intel USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8

  "" I am currently running windows 7 and was about to upgrade to windows 8, but the upgrade of Windows 8 Wizard says that "Intel® USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8 '. Is there any solution for this? How to install the drivers USB 3.0 for windows 8? Should I uninstall the drivers before updating?

  Help, please

  I thank in advance

  Hi badesha99.

  I'm glad to know that you've posted on the forums of Windows 8.

  I suggest to uninstall the driver and upgraded to Windows 8.

  USB 3.0 driver Windows 8 has native box, which is automatically installed after upgrade to Windows 8.

  See the mentioned link below for more information.

  http://www.Intel.com/support/chipsets/USB3/sb/CS-033870.htm

  Hope the above information helps and let us know the question in your next post.

• My computer says my windows is not authintic but I know that this is what is wrong. I have on my another desktop and it works find but not on my labtop. It was working fine before.

  My computer says my windows is not authintic but I know that this is what is wrong.  I have on my another desktop and it works find but not on my labtop.  It was working fine before.

  A single license is a single Installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I use an external hard drive that is compatible to Windows on a Mac through reformatting?

  I bought a Seagate Expansion 4 TB USB 3.0 hard drive.

  F8 & PSC = 1 https://www.Amazon.com/GP/product/B017KE8OG0/ref=oh_aui_detailpage_o04_s00?IE=UT

  But it is only compatible with Windows.

  Can I reformat the hard drive on my MacBook Pro - or it would even rise not?

  If so, what format to use? Mac OS extended (journaled)?

  Thank you!

  PS: I tried to put this in the Mac system software, but I could not find in 100 + element of submenu. I must say the redesign of the forum makes it much more difficult to use, and it is almost impossible to find positions in some themes that were available in the old form by a simple click on a symbol. It feels like Apple wanted to have as bad an organization like Google (endless sub-menus in otherwise good work pro apps e-mail) and be too cryptic in its structure than that of Windows. Apple, please go back to the simple user interfaces that can be understood by logic. Yes, I tried to put this comment in a comment forum, but I could not find.

  1. Yes, you can.

  2. Yes.

  (144414)

• When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: «Cannot find file C:\Windows\system32\rundll32.exe...» »

  Original title: rundll.exe error

  Hi all

  I have a problem with my file rundll.exe. When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: "cannot find C:\Windows\system32\rundll32.exe file. Check if you have entered the correct name, and then try again. "(Sorry for any incorrect translation. I have a Dutch version of Windows).

  Is there anyone who can help me with this problem? I searched on several forums, but no luck so far.
  If it helps, I have Windows Vista Home Premium 32 BIT

  Rgds,
  Robert

  Hi Robert,.

  You can try the following steps.

  1 put the CD ROM Windows XP disc in the CD-ROM drive.
  2. click on start and then click Run.
  3. type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
  4 restart the computer.

  Good luck Robert.

• c4788 driver cannot be installed on Windows 8.1

  Hello!

  I have a laptop DELL system comes with Windows preinstalled 8. On top of it, I had installed Windows 8.1 download.

  Recently I had to reinstall my Windows 8.1 due to a system crash or problem. Subsequently, I was unable to use or connect to my printer HP Photosmart C4788. I tried to reinstall the driver of photosmart C4788 by downloading the same from the site (PS_AIO_06_C4700_140_408). While trying to install, it gives me the error message "the system cannot find the file specified" and leave the installation program.

  Please indicate what I take to reinstall the required drivers and allow my laptop to connect to this printer C4788 without cable of the measures.

  Thank you

  Hari Kate

  Hi Hari,
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• NB510 - graphics driver is not compatible with Windows 10

  Like many others, I now have the chance at a free upgrade for Windows (from the pre-installed Windows 7 Starter) 10. Unfortunately, the laptop has a custom graphics manufacturer driver and I can't find a new version of Intel® Graphics Media Accelerator 3650 anywhere.

  Is there anyone who can help me?

  Hello

  I NB520, and as far as I know, our machines are not supported for Win10, not even for Win8/8.1. so, I'm not sure that you will be able to find drivers for Win10.

  Furthermore, how it works with Win10 in general? Have you noticed a lot of problems and questions?

• Firefox says that it cannot find the server (Windows Internet Exployer works fine

  When I try to log in to Firefox, I get the message cannot find server. (All my computers cable, Dsl). When we try Windows Internet Exployer, it works fine. That's what I use to send this message.

  Please visit http://kb.mozillazine.org/Firewalls

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• My nvidia geforce 6200 is compatible with Windows 7?

  Hello

  I am considering upgrading my PC from XP to win 7 but can't understand if my card is compatible. It is nvidia geforce 6200 the. Can someone tell me, in other words, if it's compatible Please?

  Thank you

  EM

  If the driver is already on the machine and you do an upgrade you won't have a problem.  However, if you do a fresh install, then that is a good question.   In general, I need to download the driver of nvidia geforce from nvidia site (or of the drive by the manufacturer if save you those) and reinstall the driver after the installation.   I don't know why it seems to be shifting for the nvidia driver, but this isn't a great thing.

  To update level or fresh install.

  Then go to the internet and search for the download of the driver...  For corresponds to the best use of the name of your board when you are looking for... for example my ASUS Board is an M4A785-M so I search google with information thus: "drivers m4a785-m."

  The second from the top which brings me to this address: (note that this is an asus dot com, which indicates that it is not a phishing site)

  http://support.ASUS.com/download.aspx?SLanguage=en&p=1&m=M4A785-M&hashedid=ef0qgvMIwOUagAVl

  I download and install the driver nvidia using the Manager of devices (from Control Panel)

  Access graphics, software update driver cards and then navigate to the folder where you have already downloaded and expanded the drivers from nVidia.

  The machine should reboot and come back with higher resolutions, you expect to do with the nVidia Driver.

• Media Center always asks me to install windows messenger. cannot find software for windows messenger. Where can I find it?

  each visit to the media center reported that (MEDIA CENTER cannot OPEN MESSENGER.  Please install windows messenger. Went to the microsoft site and cannot find the software for windows xp to download. Help

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=edd9bdcf-16b0-4678-9bbd-e9b429296246

• Error message: Windows cannot find the C:\windows\system32\drivers\prdmgr.exe file to start Windows XP.

  Original title: can't end file message system 32 drivers prdmgr.exe.

  Under windows XP when I boot, I get a message: windows cannot find the file: c:\windows\system32\drivers\prdmgr.exe and I already made a ststem restore and still get this message.

  Turn off System Restore. Use ccleaner and then go to tools/startup. Select it and click on delete. Are you sure its not the windows folder drivers? If its in the windows folder, is a worm/trojan. Looks like it belongs to the trojan.agent so sound in the drivers folder

  Use ccleaner, and then click run cleaner. First close the browsers

• The CD-ROM/DVD-ROM driver cannot be loaded by Windows and can be corrupted (Code 39).

  My DVD/CD driver drive HL-DT-ST DVDRAM GSA-T20N ATA Device cannot be loaded by Windows and can be corrupted (Code 39). How can I get the original device installed new driver if the CD/DVD drive does not work? It is available for download? Should it be first uninstalled and re - installed? A relative novice can handle?

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Update the driver for the CD/DVD drive and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Run the fixit for the following Microsoft Fixit and if it helps.

  Your CD or DVD drive cannot read or write media:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 3:

  Uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  Hope the information is useful.

• DVDXpress DX2 driver is not compatible with windows 7

  I have a DVDXress DX2 is not compatible with windows 7, how can I upgrade the driver

  Windows 7 drivers, installation and other software for the DVDXpress DX2 guide are available for download at the following link: http://www.adstechnologies.com/index.php?main_page=page&id=13&zenid=d6d731c8870e1935e0caec4f36d8d160

• Cannot find schannels with Windows Media Center

  Hello

  I recently installed a Kaiser Baas network TV Tuner with HD Homerun quick TV software
  Using the mentioned application, you can see and watch all local channels
  I just upgraded to Windows Media Center. I'm on Windows 8 pro
  When I try and set up the TV tuner in Windows Media Center, but he palms the tuner cannot find all the channels
  Can anyone help?

  Thank you

  Thanks for your help, I have re installed HD HomeRun and everything works perfectly :) Apparently it must be installed after Windows Media Center