NVIDIA driver no longer works

When this happens, the screen freezes. And then sometimes it never moves again.

The error message is something like NVIDIA kernel mode versyon 372.02 has stopped working. MY driver is NVIDIA GEFORCE GT640. Model PC is HP PAvilion P6-2305et.

Hello

Try to install this HP update the graphics driver?

You can also download the Nvidia driver current here. Explore the TG 640, your OS version and language.

The current Nvidia driver is 344.11 - WHQL version.

Jaco

I'm not an employee of ch *.

"" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

HP products:
Office 810-150se (Win 8.1)
17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
H8 1380t CTO Office (Win 7)
560z Desktop (Win 7)

Other PC:
Laptop Dell Inspiron (Win XP upgraded to Windows 7)

Tags: HP Desktops

Similar Questions

  • I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

    I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

    Can provide you advice on how I can overcome this problem.

    Concerning

    original title: update windows

    Hello

    Method 1:

    I suggest you uninstall all third-party software and then try to perform the system restore.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    Method 2:

    I also suggest to perform a system analysis File Checker.

    File system (CFS) Checker

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Post back with the results for further directions.

  • Portege R500 - CD/DVD drive no longer works

    Does anyone found a resolution to this?

    Like David, my DVD Multidrive on my R500 abruptly arrested recently - I can open/close the player, but he does not appear in Windows Explorer as a disk is valid. Do not think that I have nothing installed on the machine.

    Interestingly, I never really use the DVD player. Indeed, because of all the * heat * questions, I used to "Power Off" of the device, via the DVD icon in the system tray (i.e. option enabled me to Power on / off the unit). So while the power was OFF, it's cold the machine, and so the fan was rarely on.

    Now that my computer no longer recognizes the drive, this icon it simply shows that disabled, no possibility to the power on/off switch, and this noisy fan is almost always on. In addition, because it seems that the machine tries to recognize the drive subject time at startup, all re-start, reboot the machine now takes a few minutes to start...

    For the optical drive firmware update help? Or is there some other fix?

    Hello

    > but my Portege R500 CD/DVD drive has stopped working the next day, I had attached an external CD - RW drive for me to burn discs. Maybe it did disable my built-in drive?
    This could be the key;
    Try to access the Device Manager and remove the CD/DVD player listed and all USB host controllers and USB root hub.

    Again, restart the laptop.
    After new check restart if the CD/DVD drive has been recognized again.

  • Printer HP photosmart 8150 in Vista driver no longer works.

    My HP photosmart 8150 printer no longer works with Vista, on two different PC I own. I put it on XP and it works very well. How to get Microsoft to solve the problem of one of their updates or patches. It allows to work very well with SP2. the only available driver is built into Vista.

    Hi Everett,

    You can try to download Windows XP drivers and try to install it in compatibility and see if it helps.

    For more information see the links:

    Downloads of software & driver - HP Photosmart 8150 Photo printer

    Make older programs in this version of Windows

    Hope this information is useful.

  • DVD drive no longer works and disappears from MS explore

    New "TSSTcorp CDDVDW SH-S223C ATA Device" Samsung dvd player is visible in Windows Explorer after starting the machine.  He can see an audio CD.  However, when a DVD is inserted it reads very slowly, then stops and the drive is no longer visible in Windows Explorer.

    I updated the firmware with a utility Samsung called Firmware Samsung ODD liveupdate, but this made no difference.

    Hello

    For a new disk that should really be fixed/replaced under warranty.

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    --------------------------------------------------------------------------------------------------------

    You can try these but it seems that the drive has a hardware problem.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • External USB floppy drive no longer works

    I have a model #: p6710f computer from HP running Windows 7 desktop.

    I myself bought an external Bytecc USB Portable diskette (Floppy) disk. Although it did not work initially, it began to work a week later after some updates on my computer running. The work of at least a year since then diskette drive.

    Now the last month, the floppy drive does not show in the list where you can find the C drive or the D drive. You can hear the floppy drive respond when it is first plugged in, but it does not show on the screen which you access.

    Is there anyone who is able to understand why the floppy USB drive won't work with my computer? What should I do to solve the problem?

    Thank you for your response. Uninstalling the driver, restart the computer, and then reinstall the process... I had already tried this a few days ago. Although the computer recognizes drive as new hardware and load the driver, I was not yet able to access the disk. But here's the strange thing...

    My office is where I got this problem. Yesterday, I connect the floppy drive for my laptop for the first time. The laptop recognized as new hardware and load the driver. I was able to use the floppy drive on the laptop. Out of curiosity, I disconnect the floppy (USB connection) of the laptop drive and reconnect to the desktop computer. The Office has recognized as new hardware and load the driver. I am now able to use the floppy drive on the desktop. Weird that it is... my question to get the floppy drive on the Office to work is now resolved.

  • Video driver no longer works

    Original title: pioneering work of Vedio dtops

    I guess im not the only one with this problem. Ive went too the manu. site downloaded the driver and the date at the top, installed it and I always have problems with the same thing: Vedio driver has stoped working, he recovered. Ive also been the Intel site, Ive been too Dell and it is the same driver on both and the same updates, I think that these integrated chip suck overall. I wish I could change my vedio card. My chipset is intel 965 Express chip Family.is there another way to solve this problem? Help!

    Hi jaybird1959,

    1. is it a new or existing problem?

    2. does this problem occur when you start a specific program or does it occur randomly?

    You can try a system restore back to a point where you do not have this problem and check.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • DVD drive no longer works Code 10 failure initialization

    My computer is less than two years.  It came with Vista.
    The CD/DVD multi Recorder initially worked, but has stopped working.
    Diagnosis say the drivers are up to date, but there is a problem with the device:
    HL-DT-ST DVDRAM_GSA - H60N ATA.
    I had not used a lot, so it should not really be worn.
    My problem looks like the display by "Jackie", but I noticed that our device numbers are different.
    Please notify.

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Please make all below even if you have done some before as it is often the set of operations which solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

    Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

    Hello

    Code 39 means that the driver is corrupted or missing.

    Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
    Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
    These however is a possibility depending on which and how many you have installed.

    Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
    allows the reader to work (not re - install until the issue is resolved).

    -------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • W530 optical drive no longer works

    In addition to the problem of bluetooth I postd earlier, I also have a problem of DVD player.

    Windows Explorer no longer see this player.

    • Machine: 2436-CTO
    • OS Win 7 Ultimate 64 bit
    • Shows Device Manager THAT HL-DT-ST DVDRAM GT50N has the following error:
    • "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
    • Tent to update driver and it says that the driver is already up to date.
    • There is no new driver on the Lenovo site.

    I also tried to download a BIOS update, but there is only an iso version so he needs access to a CD burner to burn. Now I have a problem of chickens and eggs.

    Lenovo has a solution for this?

    Thank you!

    Shawn

    Hey, I fixed it. Just followed advice have removed an entry in the register. and it worked. Here is the link:

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  • Video display driver no longer works

    HP Pavilion series p6000

    Windows 7

    Graphics NVIDIA GeForce 405

    The display driver for my graphics card has regularly stops working. I installed the latest version of the driver, but that didn't help.

    In the windows Action Center, there is a message about the problem.  When I click on Details of the notification message, it says 'opening solution' but said while the solution can not be downloaded. He explains the reason for not being able to download the solution most likely is that the computer is not connected to the internet. It is obviously false, as you can see by me to be able to post this message.

    You have any ideas how I can fix this problem.

    Thank you

    It started to happen after being OK for a few months.

    Any ideas what I can do now?

  • My cd/dvd drive no longer works and is not rognized by my computer anymore. How can I reinstall?

    My cd/dvd driver is no longer recognized by Windows XP when I try to play a cd or movie, or try burning anything I get no response from the unit at all.  I tried a system restore but it did not work.  I see the instructions on the internet on how to uninstall and reinstall, but it seems that the device driver is just went and I don't know how to recover or reinstall.  I'm on a laptop HP Pavilion entertainment with Windws XP.  Any help would be appreciated.

    Thank you

    Hello
    1 - do you mean that the CD/DVD drive does not appear in Device Manager and windows Explorer?
    2 did you recent hardware or software changes to your computer before this problem?

    You can try the tool Fixit of the article below and check if that helps.
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

    You may be interested to have a look at the article below.
    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
    http://support.Microsoft.com/kb/321641

  • Maxtor One Touch Plus 4 500 GB external hard drive no longer works.

    Okay, so, I got this hd for about a year now. Never had any problems with it, and I also have a 1 TB WD external hd. The WD it still works perfectly. However, the Maxtor suddenly stop working on me on 30/06/10 while I was using it. I have music files and art for the work I do on a Web site stored on that hard drive. I got my music running and had opened the hd on my Toshiba laptop to work on things that I have towards people. My music has stopped playing its own and the hd show me the files in that my images and things were, but when I clicked on the file, there is no files inside. So, I turned off my computer and unplugged the two hds from the computer for an hour. Their return to and turned back on the laptop connected. I can still enter the WD hd, but the Maxtor one, I can't. Any time, I try to enter it, it tells me I need to format it before so I can use it. I KNOW I have not formatted and kept Microsoft Security Essentials and Spybot S & D up-to-date. I went to the Seagate/Maxtor website and did all the troubleshooting it. I also switched usb ports (my laptop has 4 of them), the cords between my works still WD and Maxtor usb and even tried to uninstall drivers and reinstall them. All my work is stored on this hard drive Maxtor and I really would rather not lose him if I can help it. I also tried to Exchange power between external hds two cords. The WD we still works perfectly then the Maxtor always told me, I need to format it. It appears on workstation as drive Local (e) instead of the name, that he was initially awarded. I know I have to not format or delete anything out of it when he started to do this for me. I hope I can recover the data so that I don't have to just start over and make people wait longer for what I owe them. (Graphics types of work on GaiaOnline a few different "shops" on the Web site.) I also hooked the hd up to a desktop computer to see if it was a problem with my computer, but even on a different computer, it still says I need to format. I am running Windows Vista, the desktop computer is running XP. Hd has also worked on the desktop before it stopped working on my laptop.

    Am running SeaTools to see if that will find and fix everything that could cause this problem.

    Hi AnthroSparky,

    See the article after some troubleshooting for your question:

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • DVD drive no longer works on the Satellite X 200

    Hello

    Although my laptop X 200-191 is just 3 weeks, this afternoon the DVD player suddenly stopped working. When I insert a dvd, the drive makes sounds like it will play the DVD, then stops and nothing more happens. When I click on the DVD drive in 'my computer' section, the Player opens and asks you a DVD... It will not play music cd's.

    I just installed a new (HD) driver for the DVD drive on the toshiba site, which should be compatible. I also tried to reinstall the previous driver, but the problem persists. I can't use the CD recovery either, for the reader DVD does not have to start the recovery cd...

    Can anyone help?

    Thanks in advance,

    Stoter13

    Hi mate,

    This looks like a serious hardware problem. Please visit the link below and contact the nearest authorized service partner in your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT#

    I mean you still (and enough) warranty on this machine, just let it repair and everything should go after the repair...

    Welcome them

  • TOSHIBA external drive no longer works

    Hello

    I bought maybe 4-6 months there is a Toshiba E05A100SBU3EW_C STOR. E ART 4 1 TB USB 3.0 2.5 inch hard drive - black from amazon and one day all of a sudden, it stopped working and I was wondering if anyone knew how to operate again on my mac or windows, please because it has lots of important data

    You understand that, on this virtual path is not esy to help. We don't know what the problem is here.
    Is the HARD drive recognized when you connect it to the PC?

    Warranty is still valid?

Maybe you are looking for

  • Why the battery fully charged but used for 5 minutes will be disabled it?

    Hello In fact I use iPad Air for 2 and a half years, but already had battery problem.i went to the premium Center in Penang service ask about it. Just give them the answer because the warranty is already so just may 1 to 1 change but must load RM1300

  • Laptop HP 2000-2b44DX Win 7 drivers

    I am looking for these Windows 7 drivers (and other suggestions on optimization of a low-grade Win8): Ethernet controllerPCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C & REV_05PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103CPCI\VEN_10EC & DEV_8136 & CC_020000PCI

  • Need of recovery for my Satellite Pro L450D - 12 X disc

    Hello I lost my Satellite PRO L450D-12 x recovery disk. Have idea how I can get it, or I can order it from anywhere? I have urgent need.

  • 2620: officejet 2620 clear impression that

    The printer works well, but after I print one job and try printing another job, I remove the 1st job in the HP software before the second job will print. Does make sense? How can I get the software will automatically remove? Thank you

  • How do DigitalSingleChannelWriter work?

    I create an instance of DigitalSingleChannelWriter using 'digitalWriteTask.DOChannels.CreateChannel (Slithe, "TimeOutWhite", ChannelLineGrouping.OneChannelForEachLine)'; What the differences between the methods below? WriteSingleSampleSingleLine (tru