nVidia graphics disappeard Manager devices, unable to re - install the driver.

Three days earlier, when I start my computer it didn't detec my offboard nVidia card (detected only my onboard Intel graphics card). When I tried to re - install the nVidia Driver, I get the error: "this graphics driver cannot find compatible graphics hardware.

I browsed the community and found someone who had a similar problem (http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/nvidia-graphic-card-does-not-show-up-in-device/d773c616-7767-47c0-94be-b35d77727941)

So I tried the following:

-------------------------------------------------------------------------

Method 1:

First of all, I suggest you to run the following Microsoft Fixit to get the problem automatically detected and corrected. This fixit checks if the device is currently disabled or turned off or the driver is not installed.

Hardware devices do not work or are not detected in Windows.

http://support.Microsoft.com/mats/hardware_device_problems/en-us

Method 2:

Sometimes, some devices in Device Manager are hidden by corrupt or missing drivers.

Follow the steps below to view devices hidden in the device manager and troubleshoot accordingly.

  1. Press the Windows key + X
  2. Select prompt (Admin)
  3. Type set devmgr_show_nonpresent_devices = 1 and press enter
  4. Type Start DEVMGMT. SMC and press ENTER.
  5. Once in Device Manager hit the view menu and select Show hidden devices.

From there, remove every instance of the Nvidia card you see as well as each unknown device. Quit Device Manager and reinstall the latest you can find for your graphics card drivers.

After installing the drivers, reboot and see if you get different results.

----------------------------------------------------------------------------------------

I haven't worked out, so I updated my BIOS, re-installed all the drivers of my motherboard and the problem is still...

I have a motherboard Intel DH55HC Hunter Cove, I have not any material changes before the problem and the graphics card cooler works great when the PC is turned on.

Can someone help me please?

So three years ago, you didn't do no software changes is? Not the new drivers and Windows updates?

The Nvidia gpu, btw?

-If the machine has been moved or struck some dust may have got into the PCIe slot.

With the machine unplugged, remove the card, clean the slot with a small brush and reposition the map.

and the power/s connector.

-Do you have a System Restore Point that dates back to before that you had first of all the problem?

If so, do a restore at this time there can help, if the card is not failing.

-Try the card in another machine, or another card in your machine, would also help determine

If the card is faulty.

-I think that the Nvidia card should show in Manager devices without worrying, but after the BIOS update

have you checked in the BIOS to check graphics Nvidia isn't somehow it disabled?

EDIT: After looking at the other thread, I see you have uninstalled and reinstalled the

NVIDIA drivers already-

-Drivers Nvidia graphics and components (PhysX, etc.) still listed in programs and features?

If so, try to uninstall, reboot, and reinstall this driver

(If you did not remove the Nvidia folder in C:\ you can reinstall the drivers from there.

It is there that the installer download you "unpacks" the files before installing).

.

Tags: Windows

Similar Questions

  • Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

    Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

    I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

    I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

    Hello
     
     
    The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
     
    Step 1.
    You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
    I would also recommend to check if there are Windows updates for this device.
     
    Step 2.
    Here is the link to download the latest drivers.
    http://www.Microsoft.com/hardware/download/download.aspx?category=MK
     
    Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
     
    This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
     
    For more information see the links below.
     
    I hope this helps.
     

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • My nvidia graphics card does not work when I install microsoft visual stedio

    as say the title my nvidia graphics card does not work when I install microsoft visual studio 2013
    How can I stop this from happening

    We know what to do?

    Yes and Yes, but it's good for now
    I restore the Windows STILL and installation of visual studio without emulator windows 8.1 phone

    and it worked

    Thanks for the reply.

  • Satellite A100-599 - cannot install the driver for nVidia GeForce Go 7600 graphics card

    Greetings to all!

    Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(

    Would be happy to be aware of how this problem... Thank you very much.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.

    Post edited by: Airtoground

    Hey,.

    > but without success.
    Does that mean exactly? You get an error during installation or what exactly is going on?

    > Only safe mode is available after the installation of this driver
    Why only safe mode is available? What happens if you start Windows in normal mode?

    And before you start a lengthy discussion: what laptop do you have?

    You may notice no problem if you install Windows recovery disk Toshiba?

  • Pavilion dv3: cannot install the driver for graphics (Clubhouse dv3)

    Hello! I can't find and install the driver for graphics card. I see on the device manager that without "ATI radeon 5400 series.

    someone help me! Thank you

    Hi @QuanTrinh

    Welcome to the Forums of HP Support! I want you to meet some problems to find a graphics driver. I'll be happy to help you with that. Let me start by getting your product number , there are a number of dv3 models in this series. I also need to confirm that you are using Windows 7 32 - bit as well.

  • Unable to install the driver for the network printer, the reason according to HP's Service: MSIServer

    Original title: Error code: OX8004FF01

    While trying to download microsoft security essentials on a computer running Windows XP Professional with service pak 3

    I received a cannot install security essentials (OX8004FF01 error code)

    I removed all Norton parts from this computer and the firewall is turned on.

    So, what is this code and how to fix the problem?

    I am not able to install the driver for my network printer, is the reason according to HP

    Service: MSIServer

    Microsoft manufacturing

    Version: 0.0.0.0.

    The name of the HP printer file is: 100_228_PS_A10_02_Full_Net_enu_NB.exe

    Any help with these problems would be appricated: * address email is removed from the privacy *

    Hello

    What is the model number of the printer?

    Help with Microsoft Security Essentials issues, contact the Microsoft Security Essentials team. You can use this link to contact them.

    http://answers.Microsoft.com/en-us/protect

    For the printer problem, check these links and see if they help.

    Method 1: Refer to this link.

    Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003.

    http://support.Microsoft.com/kb/315346

    Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:http://support.microsoft.com/kb/322756

    Method 2: Install fixit from the following link and try to install the drivers.

    How to fix MSI software update registration corruption issues

    http://support.Microsoft.com/kb/971187

    Also visit these links:

    How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

    How to install a printer driver locally for a remote printer in Windows XP: http://support.Microsoft.com/kb/282842

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

    Hi all

    I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

    They read as follows:

    NtrigApplet - unable to connect to the driver: failure to open the device

    TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

    CAN SOMEONE PLEASE HELP?
    THANK U :)

    Hi the apprentice 85,

    Remember to make changes to the computer before that happened?

    Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

     

    Step 2: Put the computer to boot to determine which program is causing the problem

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • If Windows will send a message when she install the driver for a USB device successfully or unsuccessfully?

    As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.

    Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?

    Best regards

    -Alvin Hu

    Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed).  The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status.  You can also check if the appliance does not work - it's probably faster and more accurate.  Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

    Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

    I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

    Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

    This solved my problems. Good luck with yours.

  • Windows need to install the driver for your bluetooth device

    Hello

    I own the HP Pavilion dv4t-1300 CTO Entertainment Notebook PC

    Runnin vista 64-bit for a year. affected by this bt prob 4 last 1 week...

    on switchin' on bt this error mesge

    "windows should install the driver for your bluetooth device.

    automatic update of windows I've tried

    looking for a driver to support/broadcomm hp product support

    tried installin manually

    BUT NOTHING has WORKED.

    help please...

    For this you need to 1 know which device is... Now, I was not able to find an easy way to do that, other that simply remove these devices one by one and see if the entry from Device Manager will... Or the other thing you can do, is use the reliability monitor and to see after what event the problem started...

  • Cannot install the driver for Radeon R5 230 graphics card in laptop Lenovo G50-40 with AMD APU A8

    Hello everyone.

    My name is Manu.

    Recently, I bought a laptop computer lenovo G50-40. The specifications are the following:

    8 GB RAM

    1 TB HARD DRIVE

    AMD Quad Core APU A8

    Card Radeon R5 M230 chart with graphic 2 GB memory card

    I installed Windows 8 Enterprise 64 - Bit Edition. The problem that I am facing is that I'm not able to install the drivers for the graphics M230 R5. I've updated the BIOS, tried to download the latest drivers from the Web of AMD site too. Yet, the system is simply not recognize hardware. The screenshot below should give you the image:

    It appears as a video controller. But I can't install the driver even after you use the update driver option. Please help me.

    Concerning

    Mahesh

    Well, what I did downgrade from windows 7.1 and the drivers worked well. I was a bit hesitant on windows 8.1 and there is no upgrade to Windows 8 Enterprise anyway. The games are now place beautifully. Thank you guys.

  • I can't install the driver of Unknow devices.

    Hello!

    My laptop computer intsalled Windows 7, I have install the driver, but he is a pilot, I can not install, which is Unknow driver. I find the complete driver on the hp homepage, but I can't find the driver of Unknow devices. My laptop is HP Pavilion dv4-1102tu.

    Please help me find the driver Unknow.

    Thank you very much!

    My devices is Unknow:

    ACPI\HPQ0004

    HPQ0004

    Find me this driver.

    Thank you very much

  • I need to install the driver Nvidia GeForce8600GT GM965 Express Chipset Family?

    Hello

    Just, I got my Inspiron 1720 and decided to do a clean install of Vista. This is my second attempt. So far so good. The first attempt, I couldn't install the GM965 Express Chipset Family driver. I kept having the following error:

    "This computer does not meet the minimum requirements for installing the software.

    The Setup will exit. »

    Now, I wonder if I don't even need to install this driver! My Panel of display adapater property indicates NVIDIA GeForce8600GT. Maybe I just need to install the nVidia drivers and that's all!

    Anyone can guide me please on this issue? Do I need to install the GM965 Express Chipset Family driver when my property to display adapater indicates GeForce8600GT of NVIDIA?

    Thank you

    Marco


  • Driver management concluded the procedure to install the driver NULL for the Instance ID of device USB\VID_04E8 & PID_6601\5 & 9D6A4B1 & 0 & 7 with the following status: 0xe0000203.

    What dose it mean. and what do I do about it.

    Hello

     
     
    Put the computer to boot and see if the problem persists.
    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
     

    Note: follow step 7 to reset the computer to start as usual after the boot process.
     
    Note: Also try unplugging your USB devices (including readers, printers, mouse... all added the USB device) one by one until the message no longer appears.

    Hope this information helps.
  • Satellite A500 / 01 M - can not install the driver from nVidia page

    So I bought an A500 / 01 M over a month or two ago, and the NVIDIA drivers are not updated.

    I have the nvidia site to download new drivers, but they would not install.
    He said that the pilot was not compatible and I got get the update of my manafacturer.

    I went to the toshiba site, but I could not find my model there number... I searched and everything.
    So my current drivers are similar to 186. something and the last I think is 195.62

    How can I install on my laptop?

    Hello

    Toshiba display driver are distinguished by the drivers from nVidia or ATI and therefore the version numbers are different.
    Drivers Toshiba takes supported thermal protection that controls the dissipation of heat from the GPU chip.
    Don t support nVidia drivers this protection!

    If you can install the nVidia drivers, but only at your own risk!

    How to install it?
    Well, you have to do in the Device Manager.
    -Choose the graphics card in Device Manager
    -Update driver
    -now use the advanced option which would help you to select the driver that you downloaded from the nVidia page. You must point to the folder that contains the ini files. Ini files and DLLs are driver files.

    Welcome them

Maybe you are looking for

  • Question about (composite) TV on Qosmio G20

    Hello I can watch videos and play Xbox with composite with Qosmioplayer.But I have a problem to use Composite with programs like WinDVR and CyberLink PowerCinema, there is no image or its display to me and I do not know from the setting and I see (To

  • Updating BIOS on Equium A60 to cause the BSOD?

    Hey,.I had my Equium A60 for a little less than 2 years and now it has started flasihing a blue screen when it works for a while, I tried to read what he says but it's too fast and then it restarts the computer! the only things I can do out there are

  • Replace the NIC card

    Is it possible to replace the card Realtek RTL8111E NIC in a PC Touchsmart 520-1000z? A Realtek diagnostic program showed the following: Status of the link - disconnected On a test, loopback MAC, PHY loopback, IRQ, FIFO all failed.  Wake up LAN, ente

  • PC Companion v2.1 is not compatible with Sony w302?

    Hello I have a problem with w302 my wife and after having spent a long time talking to virgin mobile (the carrier), they recommended that I must download PC companion and repair the phone to restore. So I downloaded the Software v2.1 and followed the

  • Options available for the OS deployment

    Hello. We recently purchased the Dell Poweredge R730xd servers. I can't find the 'Boot from USB' option in the BIOS. Also, I am unable to deploy the operating system using the virtual console because of the absence of iDRAC8 Enterprise license. I tri