NVIDIA nForce Serial ATA Controller can not be updated

Similar Questions

• Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C

  Hello

  The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.

  Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.

  Windows Vista/Win7 32-bit driver v15.49

  Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100

  Driver Ethernet (v73.14 +) WHQL

  (V73.16) network management tools "Sedona".

  SATAIDE (v11.1.0.33) WHQL driver

  SATARAID Driver (v11.1.0.33) WHQL

  Application RAIDTOOL (v11.1.0.30)

  SMBUS (v4.74) WHQL driver

  SMU (v1.71) WHQL driver

  GPU (v190.38) WHQL driver

  PhysX (v9.09.0428)

  Away Mode Driver (v6.0.6000.114) WHQL

  Installer (v7.57)

• NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  Hi JimmyGoings,
   
  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
   
  In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
   
  You can follow the steps in the article given below to resolve the problem.
   
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
   
  Check to make sure that the controller is enabled in the BIOS, if there is physical damage to a motherboard, it is usually fatal.
  In addition, go to the nvidia /drivers and automatically search the chipset drivers and install it.
   
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Looking for a NVIDIA nForce Serial ATA Controller Driver Update for HP Pavilion Elite e9140f

  Hi, I added a second hardrive that is 3 TB and my desktop is running windows 7 with SP 1.  I have been informed by Acronis technical support I need to get an NVIDIA nForce Serial ATA Controller update (I have version

  NVIDIA nForce Serial ATA Controller version 11.1.0.29 installed).  Can someone tell me what version I need update too and where to download?  Thank you!  Mark

  The last driver from Chipset from nVidia for your computer is located on the nForce Chipset Driver Version 15.56 download page. This driver install NVIDIA nForce Serial ATA Controller driver v11.1.0.43. This driver, however, isn't likely to solve your problem.

  You will need to check that the hard drive is seen in BIOS until the computer will recognize the drive. You will need to run the Windows 'Disk management' console to partition the hard drive in at least two partitions, MBR or GPT partition before you can use the drive.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• NVIDIA nforce serial ATA controller

  Hello

  I am trying to download this driver and having problems. I have a dv6408 of Pavilion with 64-bit Windows 7 system

  Can someone help me?

  Thank you

  karp57

  Hello:

  The 64 bit Vista driver should work for you.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51679-1&CC=US&DLC=en&LC=en&os=2100&Product=3457732&sw_lang=

  Paul

• Want to re - install elements 8 on the new computer, the serial number, but can not find the download button on the adobe Web site to do so.

  Want to re - install elements 8 on the new computer, the serial number, but can not find the download button on the adobe Web site to do so.

  Hello laetitiah

  Please visit: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

  Follow the instructions on the page to begin your download... Use your serial key to activate it

  ~ Mandy

• I can not install updates for photoshop and the product is registered and properly installed

  I can not install updates for photoshop and the product is registered and properly installed cat. I tried and they were worthless, this system I get when I click on the button in the error message customer support https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  Customer chat was worthless, and I am really frustrated.

  You can download and install updates,

  Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5373

  But if you have a complaint about your serial number, chances are that they thought that it was hacked and blacklisted. You can't be at fault, you simply a forgery.

  Nothing can be done if this is the case.

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• Want to Phoenix 850-150qe: program file can not be updated as a not enough space on the new computer

  I have a new computer with disk 3 TB initially space.  I have now available 2.60 TB.  I have this simple little card game that has an update of 207 MB of available space required.  Whenever I try to load it, it says "program file can not be updated because of insufficient disk space".   The original game loaded just fine but not the update.  I wrote to the company that has given me a standard introductory text on turn off my antivirus which is nothing to do with my problem.  Someone else has encountered this and if yes, what is your work-around?  I am trying to load it on the C drive with my game so am loading at the right side of the road.

  I solved my problem.  I went back to my computer and I went back to my reliable want 700-074 also having windows installed 10.  My little program works very well and I was able to update the program.  This program was one of the many problems with this computer.

• Can not get updates Windows 7, error code 646

  Windows updates fail almost always error code 646 today.

  Other error codes are application error 100, event id 1000 and mshtnl.dll (registry errors?)

  8 Windows Explorer has stopped working properly, running on windows 7

  There has been a change in the health of windows, event 42

  Here are some of my problems

  * original title - can not get updates, Windows 7 instead of 8 as its supposed to, registry errors *.

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• can not download updates.__error code 80070005, arrested about a year ago

  Sytem, dell 360XPI 4 GB of ram 2 gb cpu, vista SP1 home.

  whenever the fact of time, I try the system or updates, I get the error code 80070005, "system can not install updates"

  I have searced up and down and almost tried eveything and no luck.

  1 turn off all security

  2 downloaded download of updates help

  3. followed BACK to correct entry set up for the programme for downloads

  4. installation of SP2 always fails right at the end, after almost total integration.

  Oh! Yes my system restore fails, another scarecrow.

  by thanking all my colleagues computees in advance for the advice of ay.

  Bill.

  Bill,

  80070005 is an access denied; Permissions problem.

  The security software installed (security/antivirus suite / 3rd party firewall, popup, script, or cookie)
  Blocker) is preventing the system from download and install updates

  Temporarily disable any real-time protection real system of third parties (e.g., anti-virus;)  anti-spyware;  the 3rd party firewall)

  Turn to the security software installed as the cause.
  [antivirus/anti-malware/cookie or popup blocker / or any security software that monitors the registry keys for changes]

  try to reset the security settings to the default values:
  How to reset security settings to default http://support.microsoft.com/kb/313222 values

  Make sure that you run as administrator.

• I can not install updates, or I can uninstall all programs

  I can not install updates not can I uninstall all programs.  When I try it says that I am either in SafeMode or the installation program is not well installed.  I'm not in safe mode so I need to know how to fix the installation program.  can someone give me some information on how to fix Setup?  Thank you.

  To do this. Click Start--->Search---> all files and folders and type in the search box ""msi.dll " without the quotes and click on search." When the search is complete, right-click on one of the msi.dll file and select Properties. Click on the version tab on the page that has ensued. If the version is earlier than 3.1, you must download and install the latest version: WindowsInstaller-KB893803-v2 - x 86-.exe from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=25

  Hope this is useful

  Note: To determine your version of windows and service pack level, click Start---> Run---> type "winver" in the search box and click on 'OK '.

• Failure messages can not be updated KB971029 Win Vista on YOUR site only showed 8007371C error Code is 80073712

  I was make failure messages can not be updated Win Vista only indicated on YOUR site 8007371C error Code is 80073712

  Benn has been trying for a few months. July 12 last day to support. Sent me him to all sorts of places to read things, nothing helps.

  Update fails: kb971029

  Error code: 8007371C NOT 80073712

  Hi ChuckEva,

  Check to see if this article helps you.

  You cannot install some programs or updates

• Can not get updates more (error Code 80080005)

  original title: can not get updates any longer

  Have not been able to get updates since January.  Get the error code 80080005, but there is no solution for it.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

• Can not download updates for Internet Explorer 8, tried same safety stop...

  Can not download updates for Windows Vista Internet Explorer 8, just says code error 80072efd, I tried one at a time, stop my security program... I think that I have NO exp. 8, but he insists that I do! These updates will not GO AWAY! Help!

  http://support.Microsoft.com/kb/836941

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Error 0 x 80070008	Error 0x800705B4
  Error 0x8007000E	Error 0x80072EE2
  Error 0x80072EFD	Error 0x80072EE7
  Error 0x80072EEF	Error 0x80072EFE
  Error 0x8024400E	Error 0x80072F76
  Error 0 x 80244016	Error 0x80072F78
  Error 0 x 80244022	Error 0 x 80090305
  Error 0x8024402F	Error 0x8009033F
  Error 0xC80003FA	Error 0 x 80244008
  Error 0xC800042D	0x8024400A error
  Error 0x80071A90	Error 0x8024400D

  Mick Murphy - Microsoft partner