Nvlddkm.sys for my GeForce 6150SE nForce 430 graphics card driver causes a blue screen of death, whenever I look at a video of youtube for a long period of time. I have re-installed Windows 7 Ultimate 64-bit, and it always does.

Similar Questions

• NVIDIA GeForce 6150SE nForce 430 graphics card

  When I try to play games it tells me that my video card memory is unknown. When I go into the video card file it tells me that there is no downloaded driver for this device. When I try to download the drivers for it, she tells gives me an error and stops. What should I do? Help!

  You should download the driver directly from the NVidia site:

  http://www.nvidia.com/download/index.aspx?lang=en-us

• Sir my network smart vaio does NOT start after installing windows 7 ultimate 64 bit

  Sir accidentally my real Home Basic 64-bit is formatted when installing Ubuntu 13.04 in a separate disk.

  I have no backup to restore the window as recovery is also formatted.

  I installed windows 7 ultimate 64 bit and all drivers related to it is on th website:-http://www.sony.co.in/support/product/sve15115en/download

  including the original software and driver patches.

  but after that my network manager smart vaio does not work its present only in the menu start when I clicked it nothing happens.it nevers opens.

  Please help me

  do a system restore disc. contact https://www.sony.co.in/section/contactus

• NVIDIA GeForce 6150SE nForce 430 code 19 error

  Hello

  I am running Windows Vista Home Premium 32-bit and have encountered a problem with the graphics drive. There is an exclamation mark next to the NVIDIA GeForce 6150SE nForce 430 in the graphics card and the error message is "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  It is up to date and there is no driver to restore. I uninstalled it and upon restarting, Windows successfully installed the driver, but the exclamation mark is still there. It has been suggested that I choose option 2 here to search for the drivers and Graphics Driver 280.26 has been found to install, but it made no difference. I don't know if it's important that I tried to uninstall it once before and selected the 'remove the software for the device option', but who do not select the second time.

  When I select 'check for solutions' in Device Manager there are two long files that describe the error. I downloaded here and here.

  The only problems is originally so far (or at least I suppose is caused by this because it happened at the same time) is that I can't select 1440 x 900 for a resolution of the screen so my screen is off, and I can put my computer in mode 'sleep'. Sleep is grayed out in the options. Any help is very appreciated. Thank you!

  

  So, after two weeks of multiple uninstalls, reinstall, install clean, destruction of registry, driver, using different drivers sweepers, spend time with the customer of NVIDIA and passing by each troubleshoot I could Google, I removed the HP Portrait display 1.4 update and now all is well. That had been installed AFTER that I started having the problem with NVIDIA so I guess it started as a small bug (the driver for my mouse also stopped working at the same time as the graphics card, but that was a simple fix) that the HP update is impossible to fix.

  Thanks for your help, Paul!

• NVIDIA Geforce 6150se nforce 430 GPU

  I have a HP Presario 64-bit machine running Windows 7. I ran the windows 10 install app and he told me that my graphics card does not work in Windows 10. I also read that if you use the Nvidia 309.08 driver it will work. What is the scoop?

  Hello

  Please contact Microsoft Community.

  For this, I suggest refer you to the suggestion given in mentioned thread and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/how-can-i-make-NVIDIA-GeForce-6150SE-nForce-430/2ae41a08-9356-4924-aeb5-ce985994926b?page=1

  I hope this helps.

  Kind regards
  Anusha

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

  Hello

  I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

  Thank you, in advance.

  Kenwin

  Hi, Kenwin:

  Here is the link to the wireless card driver you need:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Tungsten T3 Hot Sync in Windows 7 Ultimate 64-bit and WIndows XP mode

  I've upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not be synchronized.  I downloaded desktop 4.1.4e 6.3 and 4.1.4. I tried all three in both windows 7 and windows XP mode that tells me is a 32-bit o/s but I'm really not sure.  I tried to hot sync in bluetooth in windows 7, as the T3 and laptop connect but he always tells me that the port is used by another program? Does anyone know what I have to do to get it to sync or am I've sentenced to throw my faithful T3 out? Any ideas?

  Hello eaglesfan723 and welcome to the forums of Palm.

  The Tungsten T3 HotSync driver is not 64-bit capable, this is why you can't get the T3 to HotSync.  Please read this thread to learn more about your options with Windows 7.

  Alan G

• I want to do some development C++ on WINDOWS 7 ULTIMATE 32 bit and I would like to use

  Original title: DEVELOPMENT ISSUE

  Hello

  I want to do some development C++ on WINDOWS 7 ULTIMATE 32 bit and I would like to use

  VIisual C++ 6.0 Professional Edition because I'm comfortable with it. Someone has had experience

  with ths type of environment. In the past, I have used it under XP PRO, but somehow, I lost my copy of C++ but I can't

  Buy a copy used at Amazon at a reasonable price. What I want to do is strictly office and involves calculations and

  possibly perhaps someday of graphics. Something similar to a CAD application

  Any advice will be greatly appreciated.

  Concerning

  Tom

  Hello

  Because the question you posted is related to Visual C++, I suggest you to post this question in the Forums from Visual C++.
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualC

• I had upgraded from mac to 10.11.3 & now my printer wireless HP Photosmart D110 All in One Printer is disconnected because of having Mac sleep for a long period of time.   How to connect the mac to the printer wireless?  I have the apple extreme route

  I have a HP Photosmart D110 printer got Mac upgrade to El Capitan 10.11.3.   As I had sleep mac for a long period of time, it seems the printer and computer (Wi - Fi) has been disconnected.   Now I can't print.  Need help reconnecting the mac with the HP wireless printer.

  What happens when you reboot both machines.

• Hello, I currently windows 7 Home premium 64-bit running on my laptop, can I install windows 7 ultimate 32 bit over this as an upgrade? I have the ultimate disc then, how do I use it? Thank you, Mark.

  I am running windows 7 Home premium 64 bit on my laptop. I have a disc of windows 7 ultimate 32 bit, is it possible to upgrade to the ultimate disk, if so, how, if not how do I use the ultimate disc? Thank you very much, Mark.

  No, you can't, but if its Windows 7 Ultimate you want, simply use the Windows 7 Ultimate product key to upgrade Windows 7 Home Premium to Windows 7 Ultimate using Anytime Upgrade.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  Cases of failure to upgrade Express:

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Need to install windows 7 ultimate 64-bit. Have legitimate key.

  Im working on a computer crashed friends for him.  It has Windows 7 Ultimate 64 bit.  I have the product key.  I need a bootable installation (be able to do it from usb would be GREAT because it's a netbook, not sure this is possible).  Where can I get installation?  I don't want to buy because the way in which it already has a valid key legitimate, I just need the installation of it in order to load and use his key.

  Windows 7 Ultimate X 64 with SP1 (bootable)
  http://MSFT.digitalrivercontent.NET/win/X17-24395.ISO

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  J W Stuart: http://www.pagestart.com

• Problems with drivers hp pavilion dv6-6c65sx new after that I installed windows 7 ultimate 64-bit

  I have hp pavilion dv6-6c65sx A7P80EA #A2N. I installed my windows 7 ultimate 64-bit myself and I still have two problems with the hardware drivers.

  1 - once, I downloaded and installed the new graphics driver file name Win64_152822.exe for support of the Intel, the Standard VGA Graphics Adapter the unknown value and it may need new driver. Take a look at the screenshot for more information.

  

  

  

  2. I can't use a fingerprint reader to log on windows. It says that I have not installed on application management. I tried to download some applications also tried to update the driver but nothing works for me.

  It's for more details

  Validity sensors (WBF) (PID = 0018)

  Port_ #0001.Hub_ #0003

  Hello:

  It is the only driver you must install for your model.

  He installed the AMD graphics cards and Intel.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

  In order to register your fingerprints, as well as the print real finger sensor driver, you must install the security software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103162-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

• How can I clean installed Windows 7 Ultimate 64-bit using a upgrade disc?

  Originally, I had a Windows Vista 64 - bit o/s office.

  I decided to upgrade to Windows 7 Ultimate 64-bit o/s

  The first time I ran this 'upgrade', I made the mistake of selecting the option UPGRADE instead of using the CUSTOM option.

  For some time since I've done the 'upgrade' I got BSOD problems including caused by video and WebCam drivers.

  This is why last week, I took the plunge and decided to reinstall Windows 7 Ultimate 64-bit using my UPGRADE disc (the disc is not FULL version)

  I selected CUSTOM

  I saw, I had two partitions:

  Disk 0 Partition 1: Win_RE

  Disk 0 Partition 2: CDrive (c :))

  I couldn't find an option to delete my partitions and perform a new installation.

  I ran this and finished installing fine but did not format my drive and it change named my windows to windows.old. Things seem to be ok on my PC, now that I've done this, and I don't take BSoD right now.

  However, I was told that I should be able to achieve a COMPLETE clean install delete partitions to force the OS to reformat and recreate the C: partition.

  The menu:

  Discount

  Load the driver (I have no idea what is this option)

  To make changes to partitions, restart Windows from the installation disc

  I could not click on an option to delete/reformat my partitions and thus abandoned the process.

  I then let the disc (forgive my ignorance) and restarted the PC. I dropped in the BIOS and set to boot from the DVD drive.

  This did not do anything to bring up the WINDOWS SETUP option. It would simply start Windows after that, I suspect, he couldn't find the exe file to start.

  Thus, while everything seems to work fine, I'm frustrated that I can't run a clean full install like what I'm doing doesn't work.

  If someone is able to give me advice on how I can get the installation routine to show this option which would be more useful.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Try to install Windows 7 Ultimate 64 bit on Vista Ultimate 64-bit using the upgrade feature.

  Trying to upgrade from Vista Ultimate 64-bit of Windows 7 Ultimate 64-bit. The installation of the programs continues to telling me to uninstall Trend Micro 2008. I never had 2008 on this computer. I didn't 2009 and upgraded to 2010, which is compatible with Windows 7. I uninstalled 2010, but the Windows 7 install program keeps telling me to uninstall Trend Micro Internet Security 2008. I used the uninstall of Trend Micro tool and also the Windows Installer Clean up. Still no luck. I've even went into the registry and remove any mention of Trend Micro. Still no luck. So, now what. I don't want to do a clean install. If I have to do, I'll stick with Vista. Looks at MAC ad is correct!

  Problem solved by a tech Trend Micro, which ran to remove several tools then had me into Safe Mode to delete a folder in Documents and Settings above. I'm now running Windows 7. Thank you!