nx9105: System 16316 disabled need help what power on computer hp laptop of password

System disabled 16316 need help working and then a code pop - up 16316 power on password can someone help me need power on password for hp compaq please

Hello

Enter: oirb

or

rcxalnd

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Need help with the decision of the laptop

    I'm sorry for the length of this post, but I really need help. I am buying a laptop and what should be a very exciting perspective (my first laptop purchase) turns into a nightmare that had me pretty much in tears over the weekend.

    My budget is not big - absolute maximum of 600 pounds, but I'd rather spend a little less than that.

    I mainly work of office (Word, Excel, database and PowerPoint) and also some Photoshop work. I also play a strategy game called Caesar 3. I want to charge my copy of XP on the computer or replace Vista or as a partition.

    Looking through the available templates in my price range and rising benchmarks, I found the following:

    Most have processors such as the Intel T5250 or T5450 or AMD TL 58, which are all rated as ok, but not very well. Some have the AMD TL 60, which is a little better and one or two have the T7200 Intel which is even better.

    On most of the machines graphics cards are the ATI Radeon Xpress X 1200 or the Intel GMA X 3100. These two are calibrated as not terrible and the review says that they cannot manage strategy games. Some of the models have the ATI Mobility Radeon HD 2400 and HD 2400XT and one or two have the HD 2600.

    The problem is that the models that have the best processor have the lower rated graphics card and those who do not have XP drivers, I see.

    Don't mind a 15.4 screen "(although the 17.1" would be very nice to have) and want a pretty big hard drive (160 +). I get 2 GB of RAM.

    I'm at my wits end. I don't want to buy a computer that will eventually take a minute or more to refresh a screen when you have more than two things open, or you will have to keep rebooting to make it work. I want to be able to play my one and only (Caesar III) game which is a strategy game and I want to be able to work in Photoshop and maybe one or two other things open at the same time, as a website perhaps.

    Help me please, anyone. I asking the impossible? I can't get my hands on an email address for Toshiba try to get clarity on their part on the issue of drivers and they will be available in the future.

    Then there is of course the issue detailing as each stock only a limited number of models, and we must choose between those detailing.

    I hope someone can help me!

    Hello

    The problem is you want to buy a laptop all over the place but don t want to spend a lot of money.

    In addition, you want to change the XP operating system and have XP drivers.

    Well it's boyfriend very difficult decision ;)

    A laptop for gaming with the graphics power full card cost slightly more than £ 600
    If you need to make a decision; You want to buy a gaming laptop and to spend more than £ 600 or you will have a notebook that is ideal for everyday use, like watching DVDs, in collaboration with the office software, etc.

    The Caesar game is unknown to me, but I assume that it doesn t need a graphics card high performance and it should work on a normal phone too.

    I think that a Satellite a200 is not bad choice for you, because some A200 laptop computers were shipped with the Intel Pentium Dual-Core processor and an NVIDIA GeForce graphics card.

    And very important is that all the XP drivers were already released ;)

  • I need help to update my computer (error code: 80070424)

    original title: I need help to update my computer

    I could not update my computer for more than a year. I searched for the cause of this and have been unsuccessful. Whenever I click search for updates, it gives me errors, and then I click on get help with errors and tried troubleshooting but have not been able to solve my problem. Lately, he has been interfering with the update or install new programs. Now I can't update my Itunes or Ipod. I can't upgrade to Windows 7. I can ' t use microsft word because everytime I try to install or update these things, it won't let me. I've been putting off not to worry so much about the updates, but they have reached a limit, when my computer became difficult to use. The error code is 80070424.

    Restore the system to factory settings.  Install applications from their media keys/serial numbers and product, that you put aside.  Restore your data from backup.

  • 2230 BNHMW: my computer hp laptop is disable need help

    My computer hp laptop has a stop code 54919168. Please help me

    @Shay31

    Enter 41671168

  • Need help to install the network on laptop drivers

    I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?

    The network adapter driver specifically requests the Ethernet, wifi and it...

    Hello McKinley,

    Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

    According to the description, I understand that you need help to install the network drivers into the laptop.

    Certainly, I understand your concern and will try my best to help you.

    In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.

    http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030

    Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

  • Need help to activate my Windows Vista laptop

    Hi people

    I need help... .my laptop need ACTIVATION, so I do not know how and it is then possible to use the computer without the activation of the window system? help me to use my laptop

    Rocky

    http://support.Microsoft.com/kb/940315

    Tom Ferguson

  • I have creative photography cloud I, m using Lightroom 4.5 for several months system crashed today I have no pictures in the Collection folder or anything. I need help, what do I do now? p

    I have creative photography of cloud, I use Lightroom 4.5 most of the time. When you edit photos two days ago 4.5 Lightroom crashed leaving me with no photos in the Collection, folders or anything. He continues to say yhat I have no pictures. What can I do to recover my thousands of photos and started using Lightroom CC 2015?

    To work properly, Lightroom needs three things:

    1. the program - Lightroom (you v4.5 and CC - both installed)?

    2. a file catalog (.) LRCAT)

    3. your original images. (If these are missing, you must restore backups)

    I suggest you open the Lightroom-CC program from creative application of Cloud, (OPEN the button appears after INSTALLATION)

    If LR - CC opens with no photos, go to Menu > file > catalog open (or press Ctrl + O)

    Find your file of catalog LR - 4.5 (the...) LRCAT) to open it.

    LR - CC will make a copy of the catalog file and convert the copy to work in LR - CC (LR can add "-2" at the end of the name)

    If it opens with your images everything is good - you use LR - CC with an updated catalog.

    Problems that may still occur.

    Your catalog LR4.5 is 'locked' due to a 'crash '. You must delete all files with the. LOCK the extension of the suffix, then try to open the catalog.

    Your LR4.5 catalog is corrupted. You will need to find and restore a previous backup of the catalog.

  • Cannot acess System Recovery Options, need help with the registry. Kindly help.

    Hi, sorry for the long question, but please help.

    To start off the coast, one day out of nowhere, my PC showed a "Login process initialization failed" error As a result, I am able to go pass the stage of "Starting Windows" but can't see the login screen. The way to remedy this problem is to restore windows. Now I'm able to reach recovery system (F8) Options, but it does not allow to login me as "admin". As soon as I select the language and keyboard input mode he asks me user name and password. The strange thing is there are two options for the username "admin" and the other is 'Office' (I did not have any accounts with these names). I read an article on the Dell (my pc manufacturer) website that said to log on as an administrator. But the Recovery Options does not give me access as 'admin' for any password I tried. I tried all the standard passwords and password for my account admin on PC (which has not been named admin btw). I also tried to leave it blank, but Recovery Options points out "the user name or password is incorrect" every time. Now, I tried to find a way to work around and reached here

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cannot-access-system-recovery-console-invalid/7ff2b01b-9D30-4E10-94a3-bf73a3c5f253?page=1&tab=question&status=AllReplies

    I quote an answer ' I ca, however, access the Recovery Console:
    I found a tweak on the Internet to change the registry for a password is not necessary to enter the Recovery Console. I proved that this tweak works as expected by switching between the registry by default DWORD definition ('0') and the twisted DWORD setting ('1').  When the DWORD value is set to '1' I can access all the functions of the Console recovery, but when the value of the default value of '0' without password allows access to the Recovery Console.  The tweak I used is as follows:

    ---
    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\setup\recoveryconsole]
    "securitylevel" = DWORD: 00000001
    "setcommand" = DWORD: 00000000
    ---

    The DEFAULT value"securitylevel" = DWORD: 00000001 '00000000' is (zero).  Note that all tests, as described above has been completed with the default setting for this registry entry.

    While being able to access the recovery with twisted recording Console... »

    Please just help me to implement this tweak. How can I access registry without the need to log in.

    Sorry for these elaborate details, I didn't want to leave anything. Thanks in advance.

    The way to remedy this problem is to restore windows.

    It is correct. To call the system restore, follow these steps:

    1. Use your repair Windows CD to start the computer in Windows Repair Mode. You will not have a password.
    2. Use the system restore to solve your problem.
    3. Plan in advance and create, test and document a spare, even admin account that you have a spare House key. On behalf of alternatives would easily get around your current situation.

    If you do not have a CD to repair Windows, ask a friend to burn you through the control panel / backup and restore.

  • Form of Muse, need help what to say hosting

    Hello, I need more information on the way in which the Muse contact/e-mail form. My host asked that I gather more info on how the form sends mail. They would like to know something specific in order to open the firewall. Basically, what the protocols or ports?

    Thanks for the help.

    The PHP code generated by the Muse calls the PHP sendMail function. The server must have a mailer installed and PHP must be configured so that sendMail uses this mailer.

  • Need help - what hardware/software for streaming?

    Our client is an estuary - like a State Park.  We built them an interactive application in Flash.  It's an executable compiled running on Windows 7.  It was coded in Actionscript 2.0.

    They want a fixed camera on a stretch of beach.  The power of this unit must be delivered as a stream to the kiosk hosting the Flash application.  I'm one in fact complete the Flash programming on this project.

    We need to know what equipment to install and how to configure it to feed the kiosk.  I guess that Flash Media Server must be integrated, but I'm not a video or streaming.

    The kiosk has an internet connection.  I'm pretty sure that Flash can only use FLV or h.264 (or some varieties of it).  It is not my area of expertise, but once I have a URL with the appropriate stream I can manage the interface, etc.

    A security company has already installed a camera, but I don't get anywhere trying to make it work.

    It MUST be viewed in IE and requires an ActiveX control:

    http://owc2.DDNS.specoddns.NET/

    I'm sorry that I can't give the credentials because of trust issues.

    I learned that it is connected to a facility, 50 yards away, via a CAT-5 cable.  This facility is not the location of the booth.  If the signal needs to get the camera installation and then to the location of the booth on the internet, but cannot use a browser to display, only a native Flash video format.  It's ok if the signal is delayed by a few seconds or a few minutes.

    After investigation, I got this message from the engineers of course security camera (Speco Technologies) material:

    "The network DVR stream uses the ActiveX control to display a video on Internet Explorer. The only other way to the video stream if you have access to our SDK to understand the definitions of protocols such as HTTP or RTSP streaming and it will have to integrate our SDK in its application.

    We want to be selective of WHO, we give our SDK in and we like better observe and participate actively in integration projects.

    In order to consider giving our SDK, I will need to know the following.

    • How many cases this customer see with us?
    • What is this project it seeks to integrate? The e-mail, it seems that it is for a 1 x D8RS.   “

    We are ready to replace the camera as much as we can get a stream of data able to decode natively Flash.

    Please let me know if you have any ideas.  I am at a loss and it is very important for the customer.

    Thank you!

    Eric Vetterick


    Since FMS only takes in charge the RTMP ingest, I do not think that you will be able to use FMS for this project. You could do some hack botched such as running the activeX control in a browser and use a screen capture driver to feed an RTMP capable encoder, but it's messy and really inefficent.

    Wowza Media Server supports by pulling in the RTP stream from an IP camera, and assuming that the IP camera is video encoding with codec suitable for playback in flash, Wowza will be able to take the IP camera stream and deliver the Flash clients. This assumes that the camera takes in charge RTP and assumes the network that the camera is in the East (or can be) together until NAT or port forward demand from the internet to the camera.

    Since you do not need (from the sound of things) this stream to be accessible to the public, it could make sense to run the wowza server in the establishment where the camera is connected, rather than having it on a server into an external Datacenter. This way, you don't have no recurring fees for the server.

    So what to do this work with Wowza is not rocket science, it can be a bit complex, and you can expect to spend time of application development (Java) Wowza to create administrative services to manage the camera (or additional cameras in the future).

    Either way... the speco D8RS seems to be a DVR and not the model number for the camera. If you can find the model number of camera, I will check to see if it supports RTP because Wowza would require, and if it is supported by a codec suitable for delivery to Flash.

  • Greetings: My turn off system and I need help 62115816

    Hello community: I have a HP laptop b216NR 2000 reads as follows (System disable 62115816) solutions.

    Hello

    Enter: 73873238

    Kind regards

    DP - K

  • It comes to my system and I need help...

    CyberPower Gaming battalion 502 Desktop, AMD QC FX 4170 4.2 GHz, 8 GB RAM, 2 TB HDD, DVD - RW, AMD HD7770, Windows 7 Home Edition Premium, Microsoft SideWinder X 4 Gaming Keyboard, Xenta wired Gaming Mouse. OK so big IM having problems with a couple of games that I like to play, this is my first windows computer 7 and the first computer that I have not bought from PC world, from ebuyer, MTW 2 I managed to work playing in compatibility mode, the new HITMAN game that I can't play in compatibility mode and 2 alt tab it keeps me out im guessing should not not happen? The other problem I have is with the internet (explore or firefox I tried both) when Im typing something tell Google to halfway through it bing and I'll then need to click on the screen to continue typing I hope that shouldn't be happeneing, Im wondering if I should reinstall windows again? I use Avast pro as my anti virus and it happens both when its on and outside so I don't think that his... no idea please?

    Hello
    Thanks for posting in the Microsoft Community.
    You can't play the game to the computer. This can be very frustrating for you, and I appreciate the efforts you have put in. We'll try to get this fixed number.

    1. don't you make changes on the computer before the show?
    2. you receive an error message?

    Method 1:
    You can check if the games are compatible with Windows 7
    http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=HITMAN&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

    Method 2:
    Put the computer to boot and check if a third-party software is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

    Method 3:
    You can try resetting Internet Explorer and check to see if it helps:

    How to reset Internet Explorer settings
    http://support.Microsoft.com/kb/923737
    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    If you are always faced with the question, please respond with more information, and we will be happy to help you.

  • Need help (what else is new)

    Hello

    I has been a while since I have regarding aid (it's good)

    How ever Noah I think I'm losing my mind

    Simple script button and sound stop button do not work,

    Here is the script

    mySound = new Sound();
    mySound.attachSound ("destination.mp3");
    sound_btn.onRelease = function() {}
    mySound.Stop ();
    }

    btn_skip.onRelease = function() {}
    getURL("..) ("/ pages/main.htm");
    }

    If I am controlled BOF error within the action editor window I get no error

    But if I run the app I get the buttons do not work and I get errorlike this:

    * Error * scene = scene 1, layer = Layer 3, frame = 1:Line 1: statement must appear in the Manager
    mySound = new Sound();

    * Error * scene = scene 1, layer = Layer 3, frame = 1:Line 2: statement must appear in the Manager
    mySound.attachSound ("destination.mp3");

    {* Error * scene = scene 1, layer = Layer 3, frame = 1:Line 3: statement block must end by '}'
    sound_btn.onRelease = function() {}

    * Error * scene = scene 1, layer = Layer 3, frame = 1:Line 5: operator '=' must be followed by an operand

    * Error * scene = scene 1, layer = Layer 3, frame = 1:Line 3: statement must appear in the Manager
    sound_btn.onRelease = function() {}

    * Error * scene = scene 1, layer = Layer 7, setting 1:Line = 1: statement must appear in the Manager
    btn_skip.onRelease = function() {}

    Total ActionScript errors: 6 reported errors: 6

    Any help would be appreciated

    Thanx

    Lev

    Most of your mistakes come join this code to an object rather than place them on the timeline occupied by this object (all errors referring to require a ' Manager on ").  So to remove the code for the object and create a new layer actions on this timeline and place the code.

  • Need help to fix my computer

    Recently, my computer went repair after a storm blew the Ethernet card in my computer.  As I live in France, I had no option but to bring to a local repairman French, but when I came back, I does not recognize my machine in any.  Out of a possible 222 GB, I had only 14 GB of space, compared to the 109 GB that I had before he went to repair.  Apparently, he said, there was a lot of viruses on my computer and erased off to clean it up and then reloaded my files, folders etc. turn it back on.  While I was the the only user on this computer, now it seems that everything has been covered by dell.  Little by little, for weeks, I managed to almost all recover as it should, but I noticed that there are program under me and dell user files.  I am trying to remove the program files in the two users - ensuring that they already in C:\Program Files first.  However, there are some that I don't know where they belong: AppData and AppPatch for beginners.  They should just stay in my user folder, or are they a program?  This is probably a question very silly but all I've ever done on this machine is basically lit, typed and surfed.  As you can probably I'm not computer but if anyone out there can explain in simple language, I would be very grateful.

    Kind regards.

    Program users files are different from those in C:\Program Files and should not be deleted or moved, modified or edited. Nor do anything with AppData or other records related to the system in your user folder.  You may lose access to programs and will need to uninstall and reinstall again to solve the problems.  You can also change your user profile to the point where you're able to access your account or do something with it.  It's one thing to make changes in the Documents, images, audio, music, downloads, search, favorite folders and like this in your user profile - what is normal and expected, and perfectly acceptable.   But please stay away from other folders or you may cause serious problems may not be able to be easily fixed (or may cause you to lose your data and access to your programs and Vista).  If you keep this up, the next trip to the repair shop can be much more expensive and you may lose information that cannot be recovered somehow.

    Please leave this sort of thing up to the experts.  Even I don't mess with these files because I know I can do more harm than good.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Need help to fix a computer using the command prompt

    So, my computer has suddenly crossed an escalation of alarming events, culminating with a very desperate, me trying to get information on the "Command Prompt". I don't know why, how, and it's all heart-wrenching. If someone has an idea of what could be done to fix it, I'd certainly eternally grateful to them. I will try to be as detailed as possible, so I don't miss information that might be useful for someone who know how to use.

    I have an Acer Aspire V5 - 573G, running under Windows 8 64-bit with a 12G RAM, about 1 year and a half old, and this is the story of his unexpected collapse.

    3 days ago the computer suddenly began to show extreme problems with the help of any program. I had let him sleep for a few hours, and when I came back all started running very slowly.
    At the beginning I'm not too worried about I have mostly ran programs dependent on Internet and thought it was a simple connection problem. I have conducted a malware check (which I use quite regularly anyway) and downloaded Avast to see if he could detect all viruses, but everything was fine.

    However, after that them stopping and turning back on the morning, things only seem to be deteriorating. I was not using my computer much at all, but after the second day of the fight with all that I realized that in Task Manager, something was really wide, and the drive was 100% use even when nothing was running.
    Usually, after a few minutes it would go back down to 1-2%, but as soon as I ran whatever it is, even simply open Control Panel, happen very quickly to 100 times (sometimes the Task Manager was sufficient to make this happen).

    I removed Avast and tried to delete the process when I made sure it was safe to do so, but it did not work. I tried after tutorials on the Internet for people who reported similar problems, which led me on a desperate journey funny through Windows Defender removal, an (unnecessary) extreme increase virtual memory (which I brought to the standard after that report maybe just made even slower computer), something to change the parameters of High-Performance mode so that the Hard Drive would never turn off has tried to stop the search and indexing in my session, make a small altar to Turing... nothing worked.

    I ran a chkdsk /f C: who found problems with indexing files / indexed and likely fixed, because when I ran simple verification once the computer has been again this topic found no problem. However, the situation was the same: essentially constant use of the disk of 100% and no way out.
    A sad moment, after hours of attempts, I stopped by mistake the wrong process, explorer.exe. I restarted the computer, and then the problem was still there, at least explorer.exeseemed fine.

    However, when a few minutes later, I rebooted the computer, even once, I couldn't access the desktop more and I found myself in a loop of reboot attempt that has nothing, attempted to retrieve an earlier version of the system but nothing happened.

    The only thing I can do is access chkdsk to see what the problem is, but I'm not sure that I could see a way out of this, even if there was a. The only thing that seems clear is that there is a lot of damaged clusters, that he can't solve.
    This morning I ran 2 other chkdsk /f c:, the results by saying that there was no problem and no further action was required.
    So I ran a C: /R, and once again he told me that there are some clusters damaged in this file.

    Is there something I can do? Someone has an idea of what could have happened?
    My idea was to wait for it to perform this check, run a chkdsk /f /r c: and see how it goes if I restart it, but I could really use advice from more experienced and skilled people.

    The computer has not received any physical damage, not even in the relatively distant past of her young life. Before he started having all these problems he did nothing particularly requiring either, just running a few innocent Assassins Creed II (with 11.9 available RAM for what I remember stats and a Nvidia GeForce GT 750 M, I think not that it should have been a source of so much distress). This is the first time it gives me problems.

    Also, I apologize if any information was unclear or confused, but not only am I a tragedy with computers, I also use a computer in a different language and a few technical terms could have been translated a little too big. If someone needs more information, I can do my best to give it.

    Hello

    Windows Defender is the default Antivirus which comes with Windows 8 and should not have been "removed."

    @@@@@@@@@@@@@@@@@@@@@@@@

    Reinstall your operating system:

    Here are the instructions Acer for recovery to factory settings, new condition.

    "Using Acer eRecovery application to restore your system or to create a recovery media.

    http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

    See you soon.

Maybe you are looking for