OBIEE presentation services doesn't start after upgrade

Similar Questions

• Equium M50-192 doesn't start after upgrade memory

  Hello

  at the moment I have 2 x 512 MB sticks of memory in my laptop, I bought 2 x 1 GB sticks of mrmemory.co.uk as an upgrade. When I tried to use the computer will not start until I put the original RAM support. State Mrmemory that they sent me the correct memory for my laptop, I have done no matter what wrong?

  Thank you
  Andy.

  Hello

  I think that the modules of memory are not fully compatible or defective
  It's the only plausible explanation why start Notepad doesn t
  As far as I know the laptop can be upgraded up to 2 GB of RAM (2 x 1 GB) and this module should be compatible DDR2-400 and 533 Mhz 1 GB (PA3411U-1M1G)

  PS: Have you tried to update the BIOS by using the old memory modules?
  Check if you are using the latest version of the BIOS if it is up-to-date and check if the new modules would

• EPMA Server Service does not start after upgrading 11.1.2.2 to 11.1.2.3

  Hi all

  I successfully updated and configured the EMP products but when I start the server the EPMA Service its not not fixed the error giving "the Oracle Hyperion EPMA Server Service on Local computer started and then stopped. Some Services stop automatically if they are not in use by other services or programs"

  When I looked in the newspapers of EPMA (DimensionServer.log)

  [2014 06-11 T 05: 13:24.222 - 04:00] [EPMADIM] [NOTICE: 32] [EPMADIM-1] [EPMADIM. Hyperion.DimensionServer.Utility.ChannelUtility]

  [tid: starting the server EPMA] [ecid: disabled, 0] listen to via IPv4 [2014-06 - 11 T 05: 14:57.359 - 04:00] [EPMADIM] [INTERNAL_ERROR:32]

  [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: EPMA DimensionServer Startup] [ecid: disabled, 0]

  SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not start because the connectivity of database could not be established.    to

  Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString)

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  [2014 06-11 T 05: 14:57.406 - 04:00] [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException]

  [tid: EPMA DimensionServer Startup] [ecid: disabled, 0] SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not start

  because the connectivity of database could not be established.    At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize

  (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  At Hyperion.DimensionServer.Process.Program.InitializeSessionManager)

  At Hyperion.DimensionServer.Process.Program.StartDimensionServer)

  At Hyperion.DimensionServer.Process.Program.Main (String [] args) [2014-06 - 11 T 05: 14:57.734 - 04:00] [EPMADIM] [INTERNAL_ERROR:32]

  [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: starting the server EPMA] [ecid: disabled, 0]

  SVR_ERR_PROCESS_DID_NOT_START:process ' C:\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer

  \ServerEngine\bin\EPMA_ServerEngine.exe' could not be started.

  I also looked in the event log.

  [EPMA DimensionServer Startup] ERROR SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not be started because database

  connectivity could not be established.Hyperion.CommonServices.Exceptions.SessionManagerException: Session Manager could not start

  because the connectivity of database could not be established. -> Oracle.DataAccess.Client.OracleException: ORA-12545: Connect failed

  because target host or object does not exist

  At Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString)

  -End of the exception stack trace internal-

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  At Hyperion.DimensionServer.Process.Program.InitializeSessionManager)

  At Hyperion.DimensionServer.Process.Program.StartDimensionServer)

  At Hyperion.DimensionServer.Process.Program.Main (String [] args)

  What I've observed, it's that when I upgraded from 11.1.2.2 to 11.1.2.3, it installs automatically two customers Oracle (32 and 64-bit) on

  the server. But Server customer already has Oracle installed on it.

  I looked in path Variables.

  PATH=C:\app\product\11.2.0\client_2\bin; C:\app\product\11.2.0\Client_1\bin;

  He also added check the TNS_ADMIN environment variable pointing to the Environment Variable

  TNS_ADMIN = C:\Oracle\Middleware\user_projects\config\dbclient

  and I changed it to

  TNS_ADMIN=C:\app\product\11.2.0\client_2\network\admin; C:\Oracle\Middleware\user_projects\config\dbclient

  and I am also able to ping and also connect to the database but I when to start the EPMA Server Service.

  I still get the same error.

  Well want to can someone help me

  Hi all

  I have this problem.

  Add the property "oraTNSDescription" to the EPMA_PRODUCT/DATABASE_CONN, starting from a prompt command/line, run:

  epmsys_registry addproperty #{componentID}/@oraTNSDescription "(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=host1-vip.uk.oracle.com)(PORT=1572))(ADDRESS=(PROTOCOL=TCP)(HOST=host2-vip.uk.oracle.com)(PORT=1572))(LOAD_BALANCE=OFF)(FAILOVER=on))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=MYSERV))"

  NOTE:

  -To find the 'componentID' run: «epmsys_registry EPMA_PRODUCT/DATABASE_CONN overview»

  -"epmsys_registry" utility is here: "$MIDDLEWARE_HOME/user_projects/epmsystem1/bin.

  You can also view this document.

  EPMA Dimension Server starts do not (Doc ID 1672159.1)

  The screenshots are on my blog.

  http://Hyperion-consulting.blogspot.com

• The security services do not start after upgrading to Virgin media - Windows XP

  I just installed an update for Virgin Media security - now I get a message that an error has occurred and to restart the Security Services - How to do that as it is does not start automatically at startup?

  See the answer of rhabdomantist in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/help-and-support-service-not-working-in-xp/5acbd8c6-dd69-e011-8dfc-68b599b31bf5

  And/or

  Contact technical support at Virgin Media: http://shop.virginmedia.com/broadband/help-and-support.html

• Satellite L300 doesn't start after upgrade memory

  I have a L300 (model PSLB0A - 08H 022 number) which came with 1x2GB ram. All the info I can find suggests that it can accept 4GB.
  I installed a second 2 GB of Geil DDR667 key and the system came with a lack of memory and could not start.

  Then I traded my single stick for a pair of the same, but I get the same result.
  One of the three sticks work in itself, but no combination of two works.

  I ran memtest with the two installed Geils and it resulted in a corrupted display.

  Can anyone help?

  Hello

  I think that the laptop supports only 2 GB of RAM due to the capacity of the Intel mobile chipset.
  You can check you chipset in the L300 PSLB0A - 08H 022 could and then check the properties on the Intel page.

  Welcome them

• vCenter Server service does not start after you run Windows updates

  On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied.  The vCenter server is a datacenter 2008R2 VM.

  The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1.  I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:

  SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again.  CUSTOMER:: 1

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  Anyone encountered this before?

  Hello.

  I didn't know this, but the info in Ko 1007669 may be useful.

  Good luck!

• SSO Presentation Services does not start

  Hi all
  
  I'm currently implementing SSO in the windows environment. I followed the stets as provided in the deployment guide.
  
  1. create the Replicator user: success
  2. credentials look-alike user was added to the credential store: success
  3 configured Oracle BI Presentation Services to identify the store of credentials: success
  4 but when I configure the instanceconfig.xml file to run in a SINGLE authentication mode, presentation Services does not start.
  
  This is the code that was added to the instanceconfig.xml < ServerInstance > article
  
  < Auth >
  < SSO enabled = "true" >
  < ParamList >
  < Param name = 'seem the IDENTITY '.
  source = "serverVariable.
  nameInSource = "REMOTE_USER" / >
  < / ParamList >
  < / SSO >
  < / Auth >
  
  Please note this point 3 i.e. adding credentials to the instanceconfig.xml file presentation services is restartnig.it, it's only when I add to the foregoing code it fails.
  
  The system error I get is
  "The Oracle BI Presentation Server service stopped with error 4294967295 (0xFFFFFFFF) special service."
  
  Kind regards
  Bla

  The problem has been resolved. I tried different combinations to copy paste and several reboots of the Referral Services to make it work.

  Can I get my points now? :-)

  Again my understanding is that after you have configured the details below, I should be able to bypass the authentication process (OBIEE login screen) and see the
  Dashboard directly when I switch on the connection URL. But in my case it is not the case because I put the credentials once again.
  Is there anything else I need to configure. Just trying to make single sign with Windows so when the user logs on to Windows desktop
  and passes the URL to see the OBIEE dashboards.

  Your understanding is wrong, but I suggest that to start a new thread as this if a different issue that is completely different from that described in this thread.

• Presentation service is not started get: already started process: instance1 ~ coreapplication_obis1 ~ OracleBIServerComponent ~ coreapplication_obis1 message

  Hello

  My network admin has restarted the server abnormally and stop internet access from the system, where I installed OBIA 11 g. After that I started my BI services but now my presentation service will not LIVING. all services are started except service presentation:

  Following error message;

  Process pending: instance1

  ---------------------------------+--------------------+---------+---------

  IAS-component | process type.     The NEST | status

  ---------------------------------+--------------------+---------+---------

  coreapplication_obips1 | OracleBIPresentat ~ |     N/A | Down

  essbasestudio1 | EssbaseStudio |    4328 | Alive

  essbaseserver1 | Essbase |    4456. Alive

  coreapplication_obiccs1 | OracleBIClusterCo ~ |    4300 | Alive

  coreapplication_obisch1 | OracleBIScheduler ~ |    4292 | Alive

  coreapplication_obijh1 | OracleBIJavaHostC ~ |    4316. Alive

  coreapplication_obis1 | OracleBIServerCom ~ |    4308. Alive

  If I'm trying to start the service manually by using following command then, also, it is not started. I entered after a command:

  D:\Middleware\instances\instance1\bin > opmnctl startproc ias-component = coreapplication_obis1

  Now I get after message.if I try the same command again

  D:\Middleware\instances\instance1\bin > opmnctl startproc ias-component = coreapplication_obis1

  opmnctl startproc: from opmn managed the process...

  ================================================================================

  opmn id = ACLBS05:9501

  0 out of 0 process started.

  Already started process: instance1 ~ coreapplication_obis1 ~ OracleBIServerComponent ~ coreapplication_obis1

  I don't get if the process are already so why my presentation service is not started.

  Please, help me to my presentation service.

  Thank you

  Looks like your catalog is damaged. See this

  [2015 08-13 T 04: 57:23.000 - 07:00] [OBIPS] [ERROR: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] invalid element \\?\D:\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\OracleBIApps\root\system\mktgcache\sawguidstate.atr. [[

  Leader: catalogimpl.cpp

  Online: 968

  Geographical area:

  Saw.Catalog.impl.Read

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ECID:

  ]]

  [2015 08-13 T 04: 57:23.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] error loading \\?\D:\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\OracleBIApps\root\system\mktgcache\sawguidstate.atr []

  Leader: catalogimpl.cpp

  Online: 989

  Geographical area:

  Saw.Catalog.impl.Read

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Then try to copy these files to some other working environment

• FF does not start after upgrading to version 27.0.1

  FF does not start after upgrading to version 27.0.1
  Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

  Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• Satellite P200D-130 does not start after upgrading RAM

  Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
  I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
  Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

  I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
  I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

  What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

  Thanks in advance,

  Michael

  Hello!

  I think that both modules are not compatible to the laptop.
  Normally you can upgrade your laptop to 4 GB. Look in the user manual.

  The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

  Good bye

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• Newbie question - unable to see the port number in OBIEE presentation Services

  Hello
  
  I installed IIS and then installed 10.1.3.2.2 OBIEE. The installation was successful, and to restart the OC4J was also started successfully. However, when I hover over submission Services on the start menu, I see the url http:/localhost/analytics and when I click on that I can't see the login screen. . I think I should be able to see the url http://localhost:9704 / analytics. How can I solve this problem?
  
  Thank you
  Yasir

  No here is a simple way... no need to work in EM...

  Go to the properties of Présentation Services menu option Oracle Business Intelligence :

  In the Web Document tab, replace the URL... simple as that...

• Bootcamp does not start after upgrade to Mac OS Sierra

  10 Windows fails to start after the update of the Sierra. Mac Mini end of 2012. Volume can be locked and dirty.

  Paragon NTFS is installed. How can this be repaired

  You can disable Paragon and test? If this does not work, please after the release of the following OS X Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The command 'sudo' need to enter your password when prompted.

• iTunes does not start after upgrading to version 12.1.3.6

  Help! I use widows 10, 64-bit, and my itunes will start after you updated to version 12.1.3.6. Error message: iTunes did not work corectly due to a problem.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. (Yes, I see that you've done that but maybe not the specific deletions which are mentioned).

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2